Pvm9005sjss Parts

This Wave guide cover protects the microwave's interior waveguide opening from food splatter and debris, helping preserve performance and reduce the risk of arcing or burned spots on the cavity wall. What it does:

• Covers and shields the waveguide opening to keep grease and food particles out of the microwave's wave path.
• Helps reduce arcing or sparking caused by food buildup on the waveguide.
• Prevents direct contamination of internal components that can cause odors or smoke.
• Maintains a smooth interior surface for more consistent heating performance.

• Disconnect power and unplug the microwave before servicing.
• Remove the old cover carefully; it may be held by clips or a single screw—retain hardware for reinstallation.
• Avoid using metal tools that could scratch or damage the cover or surrounding cavity.

This installation hardware kit provides the mounting fasteners and brackets needed to secure your appliance during installation, helping restore proper fit and stable operation. It's a small parts kit designed for use where OEM mounting components are required. What it does:

• Supplies the mounting screws, brackets and small hardware used to attach and level the appliance
• Replaces missing or damaged fasteners that can cause loose panels, gaps, or vibration
• Helps restore proper alignment to doors, panels or trim that rely on factory hardware
• Useful when reinstalling an appliance after servicing or moving

• One installation hardware kit

• Follow the appliance's OEM installation instructions and torque recommendations
• Disconnect power and water before starting work
• Keep small parts away from children and pets; use proper tools to avoid stripping screws

This replacement plate restores the original support and fit for the appliance component it secures, helping stop rattles and misalignment. Use this OEM-design plate when the original is bent, cracked, or missing. What it does:

• Provides a stable mounting surface to secure adjacent parts and assemblies
• Prevents movement that can cause noise, misalignment, or uneven operation
• Restores correct spacing and alignment for panels or elements
• Helps maintain safe, consistent appliance performance when damaged

• One plate

• Disconnect power (unplug or switch off breaker) before starting any repair
• Handle edges carefully; replacement metal parts can have sharp edges
• Verify orientation and alignment before tightening fasteners; use only the hardware specified by the manufacturer

This safety cover protects internal wiring and components by enclosing delicate parts and helping prevent accidental contact. It restores a safe barrier and helps avoid shorting or debris buildup in the affected area. What it does

• Covers and protects wiring, connectors and nearby components from contact and debris
• Helps prevent accidental electrical contact and reduces risk of shorts where the cover is installed
• Commonly replaced when the original cover is cracked, melted, broken or missing
• Helps restore proper component spacing and secure mounting of nearby parts

• One safety cover

• Disconnect power to the appliance before servicing; verify it cannot be energized
• Remove panels or trim as needed to access the cover; keep fasteners for reinstallation
• Align mounting tabs or screw holes and secure with the original hardware
• If wiring or components show damage, replace or repair those items before reinstalling the cover

A small plastic retainer that secures the appliance control board in its housing to prevent movement and intermittent connections. Keeps the control board seated for reliable operation and reduces rattle or contact issues. What it does

• Holds the electronic control/PCB firmly in place inside the console or chassis
• Prevents board flexing that can cause loose connectors or intermittent faults
• Reduces vibration noise and rattling from a loose control board
• Helps maintain proper alignment for wiring harnesses and connectors

• One board latch (single retainer as shown)

• Disconnect power to the appliance before servicing to avoid shock or damage
• Remove the console or housing cover to access the control board; handle the board by its edges
• Snap the latch into the designated mounting posts until it securely engages the board

This assembly fuse restores overcurrent/thermal protection to the appliance's electrical circuit, helping stop power loss and intermittent operation. Replace a failed fuse to return reliable power path protection and safe operation. What it does:

• Provides circuit protection by opening the circuit when excessive current or heat is detected
• Prevents further electrical damage by interrupting power during a fault
• Common symptom: appliance won't power on or shows intermittent/no power
• Common symptom: control or heating components lose function while other parts remain powered

• Disconnect power (unplug or switch off breaker) before replacing the fuse
• Verify the appliance is fully de-energized and wear appropriate PPE (gloves/eye protection)
• Replace only with the exact part number to maintain proper protection and fit

This nut assembly is a small mounting fastener that secures appliance components to studs or brackets, helping keep panels and internal parts stable for safe, quiet operation. What it does

• Secures components to threaded studs or bolts to prevent movement and vibration
• Restores proper fit of panels, trim, or internal assemblies when a worn or missing nut causes looseness
• Prevents electrical or mechanical contact caused by shifting parts
• Simple, durable replacement for a single mounting point

• Disconnect power to the appliance before servicing to avoid shock or injury
• Use the correct size wrench or socket to avoid rounding the nut; snug, not overly tight
• Verify the mating stud/bolt and threads are clean and undamaged before installation
• If other mounting hardware is corroded or damaged, replace all affected fasteners for a secure fit

This body latch assembly secures the appliance door during operation, restoring proper door closure and allowing cycles to start and run safely. It replaces a worn or broken latch to improve sealing and reliable door engagement. What it does:

• Physically latches the door to keep it closed during operation
• Prevents the appliance from starting when the door is not fully engaged
• Resolves symptoms like a door that won't stay closed, cycles that won't start, or intermittent door-sense errors
• Replaces worn, cracked, or damaged latch components that impair engagement

• Disconnect power (and gas, if applicable) before beginning any repair
• Remove outer door or access panel per OEM instructions to reach and replace the latch
• Handle plastic latch components carefully to avoid cracking; test door engagement before reassembling panels

The Thermostat is an OEM part for GE  microwaves. It monitors the temperature inside the microwave during operation.

Causes of a bad thermostat can be simply wear and tear over time. Exposure to spills, dirt, or dust can also cause issues.

Symptoms of a bad microwave thermostat include:

• Food not heating evenly or completely
• Longer than normal cook times needed
• Error messages related to abnormal temperatures
• Potential overheating issues or damage due to lack of temperature control

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This refrigerator thermostat controls and regulates the appliance's internal temperature, helping the cooling system cycle on and off to maintain set temperatures. It replaces a failed or inconsistent temperature regulator to restore proper cooling control. What it does:

• Senses internal cabinet temperature and signals the compressor/fan to cycle on or off
• Helps keep food safely chilled by maintaining the selected temperature range
• Commonly used when the refrigerator is too warm, too cold, or cycles erratically
• Replaces a damaged, stuck, or intermittent temperature control

• Disconnect power to the appliance before beginning any repair.
• Handle capillary tube and sensor elements carefully to avoid kinks or damage.
• Ensure correct mounting and wiring match the original; take photos before disassembly for reference.

A noise filter that helps suppress electrical interference on the appliance power line, reducing hum, arcing and radio-frequency interference for more reliable operation. Fits into the appliance mains to limit unwanted electrical noise. What it does

• Suppresses line noise and radio-frequency interference that can cause humming, buzzing or intermittent operation.
• Helps prevent electrical interference that affect controls, displays or nearby audio equipment.
• Used where power-line filtering is required to maintain stable operation of the appliance's electronics.
• Common symptom: intermittent control response, audible electrical noise, or interference-related malfunctions.

• One noise filter.

• Disconnect power at the breaker or unplug the appliance before servicing.
• Access may require removing a rear or control panel; keep track of fasteners and grounding connections.
• Replace only with the exact part number; ensure proper orientation and secure mounting.

The Main Board is an OEM part for GE microwaves. As the central control board that coordinates various functions, it is responsible for operating the key mechanisms of the microwave including the turntable motor, magnetron, high voltage transformer, and touchpad controls. 

Causes of a bad main board can include failure of electronic components over time due to normal wear and tear, exposure to power surges, or physical damage. 

Symptoms of a bad main board include: 

• The microwave fails to power on or function 
• Inoperative or unresponsive touchpad controls
• The turntable not spinning properly
• Uneven or incomplete cooking
• Error codes displayed

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. Replace yours today to restore full functionality to your microwave.
 

This nut assembly secures an appliance component to its mounting point, restoring a solid connection and preventing unwanted movement. Replace a damaged or missing nut to stop rattling and keep parts aligned for reliable operation. What it does:

• Fastens a panel, bracket or component to its mounting stud or bolt to maintain proper alignment.
• Restores a secure connection when the original nut is stripped, corroded or missing.
• Helps stop rattling, looseness or parts that won't stay in place.
• Works as a direct replacement to restore proper fit and function.

• Disconnect power (and water if applicable) before beginning any repair.
• Use the correct-size socket or wrench; avoid cross-threading when installing.
• Tighten snugly but do not overtighten — replace mating hardware if threads are damaged.

This lamp holder secures the oven light bulb and provides the electrical connection needed for interior oven illumination. It restores a stable socket for the bulb so the oven light turns on reliably and stays mounted. What it does:

• Holds and connects the oven light bulb so the interior light illuminates during use
• Replaces a cracked, melted, or loose socket that can prevent the bulb from lighting
• Stops intermittent lighting caused by a worn or failed lamp holder
• Prevents the bulb from rattling or falling out when the oven door is opened or closed

• One lamp holder

• Disconnect power to the appliance before starting work to avoid shock
• Allow the bulb and interior to cool before handling the lamp holder
• Handle wiring and connectors carefully; match original connections and secure firmly

Stirrer motor

The Microwave Transformer is an OEM component specifically designed for GE built-in microwave ovens. This transformer steps down household voltage to safely power microwave generation and magnetron tube operation. 

Causes of failure can be heat cycling degrading insulation or loose electrical connections resulting in arcing. Moisture damage over time can corrode internal windings and circuitry.

Symptoms include: 

• Inability to produce microwaves for consistent cooking 
• Sparking or burning smells coming from transformer casing
• Tripped circuit breakers or blown fuses after usage  
• Intermittent or unreliable power to oven electronics

This genuine GE part is compatible with Hotpoint and select Kenmore microwaves as well.