Your privacy choices: We and our partners use cookies for analytics and ads. Decline all turns them off.
Privacy Policy · Do Not Sell or Share My Personal Information
Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Door Interlock Switch is an OEM part for GE microwaves. It ensures the safety of the microwave by preventing the appliance from operating while the door is open. This switch is part of a microwave's safety mechanism, which includes multiple interlock systems designed to stop the generation of microwaves immediately once the door is opened, thereby protecting users from exposure to microwave radiation.
Signs that it's time to replace your door interlock switch include the microwave not starting or stopping unexpectedly, the microwave continuing to operate with the door open, or a failure to heat food even though the appliance seems to be running.
Symptoms of a bad Door Interlock Switch include:
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Removed and replaced 3 door switches and mounting bar that holds switches plastic gets brittle with age and each switch comes out slightly different from each other, the chances of breaking a mounting pin is very easy. care should be taken when snapping mounting bar back into place to insure top latch and bottom latch locate properly insure bar is proper aligned when tightening screws their is free play in mounting bracket that could affect door properly engaging switches. NOTE that their are... Read more
The Halogen Lamp is an OEM replacement part for GE microwaves. It provides optimal interior light for monitoring food as it cooks. Consistent illumination supports convenience and usability.
Causes generally involve standard wear of the lamp coil and filament from heat and electromagnetic forces during operation. Accidental damage is another potential issue.
Symptoms of a bad halogen lamp include:
This GE OEM replacement is compatible with some Hotpoint, RCA, and Kenmore models.
The light inside the microwave oven was out. I could not see where it was and how to get at it because the inside is a continuous box. Went online to youtube for my oven model and sure enough a very well made demonstration of how to replace the light bulb was there. Found the part number from AppliancePartsPros.com, ordered, and in a few days the new bulb was there, and it was easy to replace. Read more
Fix a microwave that won't start or stops mid-cycle with this door interlock monitor switch. Ensures safe operation when door closes. DIY repair.
Microwave not heating? The magnetron generates the radiation that cooks food. Moderate DIY repair—discharge capacitor first, then swap 3 screws.
14 year old GE Profile microwave wouldn't heat, but had power. Read reviews here. Ordered triumvirate of magnetron, capacitor, & diode. Was hoping not to need the capacitor as this was an expensive part; and if not needed to return to AppliancePartsPros, which has been SOP. After watching a couple YouTube videos of microwave capacitors being shorted, I made a capacitor discharge tool ordering 24W 100K Ohm resistor and high voltage test wires w/ alligator clips from amazon. At the same time,... Read more
Microwave not heating? High voltage capacitor stores energy to power the magnetron. DIY repair typically takes 30-60 minutes with proper safety care.
I took the advice of another buyer and replaced the magnetron, capacitor, and diode from my microwave (make sure you discharge the capacitor). It was not a problem at all to do, I did find an excellent video on YouTube on how to test all of these components and almost anything else in a microwave. It’s called Microwave Oven Troubleshooting in Minutes- Step by Step by electronicsNmore. It was the best thing I watched. Turns out my magnetron was the only thing that was bad and it’s the most... Read more
Traps grease, smoke, and cooking residue to protect microwave interior surfaces. Replace when damaged or heavily stained. Verify fit with your model.
Time to change charcoal filter. Read more
The Mounting Plate Assembly is an OEM part for GE microwaves. This component is designed to mount and stabilize the microwave over the range, ensuring it is safely anchored in its designated space. The mounting plate serves as an interface between the microwave and the wall or cabinet, distributing the weight evenly and providing a firm foundation for the appliance.
Causes of a bad Mounting Plate Assembly can stem from improper installation, which may lead to undue stress and eventual warping or weakening of the material.
Symptoms of a bad Mounting Plate include:
Loose or wobbly microwave unit, indicating the plate may be unable to properly support the microwave's weight.
Difficulty in aligning or fitting the microwave onto the mounting plate, which could be due to warping or damage.
Visible signs of wear, rust, or damage on the plate itself, which can compromise the stability and safety of the mounted microwave.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Charcoal filter removes smoke, fumes, and odors from microwave ventilation. Replace every 6-12 months for optimal performance. Confirm fit by model.
Illuminates the microwave cavity for viewing food during cooking. Replace when dim, flickering, or burned out. Confirm fit with your model number.
Tried to turn the microwave on, checked the outlet for power, check the breaker to see if it was tripped, all was in order. Removed the over the range microwave and pull the covers, Tested continuity with a multimeter for each of the 4 normally closed thermostats, found 2 bad (open). The upper 110 and the lower right 70. Ordered the needed parts as well as both lamp sockets and bulbs as they where broken too. The parts where correct and where delivered on time. (Also, in your tools needed or... Read more
Absorbs odors and filters grease from microwave exhaust. Replace when air quality diminishes or every 6 months. Verify fit with your model number.
Ordered the charcoal filter Lowe's told me to order. It was the wrong one and arrived damaged anyway. The AppliancePartsPros person I talked to gave me a credit for the wrong filter and sent me the right filter. It arrived in one day, plus it was almost $30 cheaper than the one Lowe's told me I needed. I couldn't be more pleased with the service and prices at AppliancePartsPros. Thank you. Read more
Connects microwave ventilation system to ductwork. Mounts at top or rear of unit. Replace if cracked, broken, or missing for proper airflow.
This damper was added to the outside vent duct line as an additional block against outside air intrusion. Under spousal orders I had just changed the microwave vent to the outside (the proper way to go, but much more difficult to accomplish) but then there was some "flowback" when the wind was pressing against the back of the house (westward facing), and I was ordered to reduce this flow before the winter arrived in full force. There is this same damper on the microwave unit itself, but I... Read more
Grease filter for range hoods and over-the-range microwaves. Dimensions: 5-1/16" x 7-5/8" x 3/32" (5.0625 x 7.625 x 0.09375). Rectangle shape. Captures grease from cooking air. Replace when clogged, discolored, or every 6-12 months.
After looking at many different stores for a replacement part, finally looked on GE website - the part was rediculous - then found AppliancePartsPros.com & saved $20.00 on the part! It took a considerable amount of time to locate the part but once I discovered APP.com, took seconds to order & seconds to replace - very pleased! Read more
Covers the upper front exhaust opening with louvered slots. Replace if cracked, loose, or missing to maintain proper ventilation and appearance.
I purchased an OEM replacement part and installed it. Read more
The Micro Switch is an OEM part for GE microwaves. This part ensures the appliance operates only when the door is securely closed. It controls the electrical circuit, allowing the microwave to start heating food when the door latch engages the switch.
Causes of a bad micro switch can include wear and tear from frequent use, electrical issues, or physical damage from slamming the microwave door.
Symptoms of a bad micro switch include:
By replacing the switches. Read more
Replaces a cracked, bent, or missing microwave exhaust damper flap. Installs on top of the unit to direct airflow and prevent drafts when not venting.
Circular ring assembly that supports and rotates the glass turntable in your microwave. Replace if cracked, broken, or wheels are worn and damaged.
Opt-Out Request Honored
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.