Sca1001hss Parts

Followed the suggestions and washed off the wave guide cover first (it had some food soil on it). Put it back on and tried operating the microwave with nothing in it. Got a real big spark then. Discovered that there were some areas on the door that had paint scraped off. Looked like the power was all directed to this bare metal area causing the mica wave guide cover to really scorch then, with nothing else inside the microwave to absorb the energy. So I got some black appliance paint and... Read more

Put in new parts and working fine! Thanks Read more

I unplugged the oven and left it installed over the range, removed the screws for the bottom plate, unplugged the cable for the bottom lamp and the turn table motor. Two screws removed the motor and the mount from the bottom of the oven. The new motor and mount replacement parts in the kit were installed easily by replacing the two mounting screws. Reassembly was the reverse of disassembly. Read more

My husband is the hero in this story. At this time in our lives we weren't looking to purchase another microwave. After 10 years at my company, due to a workforce reduction, my position was eliminated. He quickly realized it could be the fuse. We searched the microwave and the part on line and appliance part pros came up with the parts for our microwave. We needed the fuse and the fuse holder. For under $20 we were able to get the microwave working again. Thank you appliance part pros for... Read more

If you search for this issue online, you’ll see this is caused by a faulty door switch - the primary interlock micro switch (with the red button). This switch is at the lowest position in the bracket that holds the switches. The hardest part for me was pulling the cover off. Two screws on one side of the black cover, one on the other side and several screws in back. The cover slides back. The switches are clearly visible on the right hand side. The white door paddle presses on the switch... Read more

Replaced unit. You need to know that the touch pad needs to come out to make repair. One screw and two tabs on bottom. Mechanical connection on damper unit has a tab that connects assembly to damper unit. This needed to be bent up to remove old part. Read more

I ordered both the Grille Assembly and two Grille Clips because it wasn't clear that the clips came with the assembly; they do. I was glad that I did because one of the clips on the assembly was defective, so I had a back up. NOTE: save your old screws; they are NOT included. Installation is relatively simple. It is important that you get the side edges snapped into position before screwing the assembly into place. This may require another person. You most likely will need a small step stool... Read more

My husband was able to take the door apart and install the handle once we received it. Read more