Sf387peyn4 Whirlpool Range Parts

I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it... Read more

• Won't start
• Gas igniter glows, but will not light
• Little to no heat when baking

Replaced the oven igniter, following the general instructions on the ApplicancePartsPro.com website. It took me a little while to figure out how to get to the wiring for the igniter, as I had no access panel on the back to get to the wires. In my particular Whirlpool oven (very old model) it turned out that you have to remove the pots/pans drawer under the oven to get to the exposed wiring at the back. Once I figured this out, the rest of the replacement was a snap. Read more

Your part was a perfect replacement. Fixed in 30 minutes. Read more

Removed rocker switch,made up jumper so the compactor could be used while awaiting replacement switch. The part came 2 days later and was installed in less tha 5 minutes. Unit working like new again. Thanks for the great service!! Read more

Replaced the igniter element and it worked. Despite the old igniter was still glowing red hot upon power up and the resistance test also showed that there is still a continuity between the igniter element. Thanks to your online technical support for helping me diagnosed the issue. Read more

After testing circuits to determine that the spark module was not working, I ordered the replacement part. Then it was just a matter of removing the old module and replacing it. Read more