Sgsc304rs Parts

A locknut that secures threaded shafts and fasteners in appliances to resist loosening from vibration and maintain stable component alignment. Replacing a damaged or stripped locknut restores a secure fastening and reduces rattling or movement. What it does:

• Keeps nuts and components locked on threaded shafts to prevent backing off under vibration.
• Commonly used where a retained fastener is required on motors, pumps, or moving assemblies.
• Replace if you notice loose parts, persistent rattling, or visible thread damage.
• Restores proper fastening to help prevent premature wear or component misalignment.

• Disconnect power (and water/gas if applicable) before servicing the appliance.
• Use the correct size socket or wrench and hold the mating component to avoid over-torquing.
• Inspect mating threads and replace any damaged hardware to ensure a secure fit.

The Tape, Foam is an OEM part for Bosch cooktops. This foam tape creates a tight seal between the cooktop surface and surrounding countertop. It helps contain spills and keeps external surfaces heat-isolated.

Causes of bad foam tape can include wear and breakdown of the adhesive over repeated exposure to cooking heat and cleaning chemicals.

Symptoms of a bad foam tape include:

• Fluids leaking down around the edges of the cooktop
• Hot surfaces outside the cooktop area that can cause burns
• Reduced heat containment impacting cooking efficiency

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This TH capacitor is an electrical control-circuit capacitor used on compatible Bosch appliances to help stabilize voltage and filter electrical noise for reliable control-board operation. Replacing a failed capacitor can address intermittent control issues. What it does

• Stabilizes control-board voltage and helps filter electrical noise that can cause erratic behavior.
• Supports reliable startup and operation of control circuits.
• Common symptom link: intermittent or unexplained control-board errors, erratic or non-responsive controls.
• Common symptom link: appliance displays control or error codes related to electronics or intermittently fails to start.

• Disconnect power to the appliance at the breaker before servicing to avoid shock.
• Discharge any capacitors and allow boards to sit before touching components; use appropriate ESD precautions.
• Only replace with the exact part number; confirm orientation and connector fit before reassembly.

A protective terminal boot that slips over a capacitor connection to shield it from moisture, dirt and accidental contact, helping reduce risk of shorts and maintain a reliable electrical connection. What it does:

• Covers the capacitor terminal to reduce the chance of accidental contact and arcing.
• Protects the terminal from moisture, dust and debris that can compromise electrical connections.
• Helps prevent corrosion and keeps the terminal area cleaner for more reliable operation.
• Signs it may be needed: cracked, torn or missing boot; visible arcing or burn marks near the capacitor; intermittent electrical behavior that points to a compromised connection.

• Always disconnect power and unplug the appliance before working on electrical components.
• Discharge the capacitor per OEM instructions before touching terminals to avoid shock.
• Push the boot fully onto the terminal for a snug fit; ensure no wiring is pinched or under strain.

The Regulator is an OEM part for Bosch ranges. This regulator controls gas flow to the burners, ensuring they receive the proper amount of fuel to achieve the desired cooking heat levels.

Causes of a bad regulator include cracks, jets becoming clogged over time, or damaged thermostatic components that improperly sense temperature.

Symptoms of a bad regulator include:

• Burners that will not ignite or light unevenly
• Inability to adjust burner flames precisely
• Burners that become too hot or too cool unexpectedly
• Yellow burner flames instead of blue

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This griddle cover handle replaces a cracked, loose, or missing handle so you can safely lift and lower the griddle cover. It restores a secure grip and the cover's intended ease of use. What it does:

• Provides a stable grip for lifting and lowering the griddle cover
• Replaces broken, cracked, or worn handle that won't stay secure
• Helps prevent accidental drops or contact with hot surfaces while handling the cover
• Matches the original appearance and mounting location for a clean repair

• Turn off and disconnect power to the appliance before starting any work.
• Allow the griddle and surrounding surfaces to cool completely to avoid burns.
• Use basic hand tools; handle attaches at the cover's designated mounting points—do not force or modify the cover.
• Replace with OEM-specified fasteners.

This stainless-steel griddle cover protects the cooktop griddle and helps contain grease and heat while not in use. It restores appearance and provides a durable surface that resists staining and light dents. What it does:

• Replaces a dented, warped, scratched or missing griddle cover to restore proper fit and appearance
• Helps contain splatters and drips when the griddle is not in use
• Shields underlying components from debris and makes cleanup easier
• Matches OEM fit and finish for proper alignment on compatible cooktops

• One stainless-steel griddle cover

• Allow the cooktop and griddle to cool completely before handling
• Wear gloves to avoid cuts on sharp edges and to keep the stainless finish clean
• Align the cover to the griddle area and set into place per your appliance's mounting features

A replacement cover for the left-front potentiometer switch that protects the control shaft and helps maintain knob alignment for reliable temperature adjustments. Fits where the potentiometer's outer trim or cap is cracked, worn, or missing. What it does

• Protects the potentiometer shaft and internal switch from debris and accidental contact
• Helps keep the control knob aligned and seated properly on the shaft
• Restores a finished appearance to the control panel around the left-front control
• Use when the existing cover is cracked, broken, loose, or missing

• Disconnect power to the appliance before beginning any work
• Remove the control knob and any trim or panel pieces as needed to access the potentiometer
• Align the cover over the potentiometer shaft and press or secure per OEM method; handle plastic parts carefully to avoid cracking