Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This turbidity sensor detects how clear the dishwasher's wash water is so the control can adjust cycle time, rinses, and water changes. Replacing a faulty sensor helps restore proper cleaning performance and normal cycle lengths.
Replaced the turbidity sensor. I watched the video on how to replace the sensor. It took me a little longer than what service rep. said. But I finely finished the repair and now my wife has been using the dishwasher for the past week. I kept checking for leaks but so far so good. Thank you Appliance Parts Pros for your help. I installed the sensor on 08/18/2020. Don Read more
Fix dishwasher not heating or running for hours. This NTC temperature sensor monitors water temp and prevents overheating. Moderate DIY repair with video.
Ordered new heater/thermostat piece. Read more
Secures tine rows in dishwasher racks, keeping them properly positioned. Replace when cracked, broken, or missing to restore stable rack alignment.
Replaced the part with the piece I received from AppliancePartsPro. Snap in part. The thing that made it easy to order was that the picture on the website was clear, compared to the exploded view provided by the manufacturer. While I was at it I ordered extras, and some other basket parts that were inexpensive. Read more
The Float is an OEM part for Bosch dishwashers. This float senses water levels inside the dishwasher, signaling the inlet valve to refill when needed.
Causes of a float malfunctioning can be mineral deposits accumulating and weighing it down over time, or cracks in the plastic housing allowing water in.
Symptoms of a bad float include:
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
Replaced the defective float switch. Read more
O-ring seal prevents leaks between dishwasher components. Replace when you notice water drips or moisture buildup. Confirm fit with your model number.
WE replaced the drain pump and it still wouldn't drain sometimes. Finally we realized that the drain hose wasn't the correct bosch hose and the rubber was starting to bend and kink where it went through the hole to under the sink.So we bought the drain hose and replaced. Read more
Push-button cap for dishwasher control panels. Replaces broken, cracked, or missing buttons to restore control functionality and panel appearance.
Removed 10 Star Screws to get the door cover off and the fascia panel snapped off. Inserted the 6 buttons and the door handle into the facia panel prior to snapping it in place. Screwed the door cover back in place and the job was done. The facia has two tabs that need to be inserted into the door. Be careful not to crack them as they seem fragile. The first facia panel I ordered arrived with with one of those tabs cracked off. Read more
Fix a dishwasher that won't fill, overfills, or leaks from the base. Water inlet valve controls flow into the tub. Moderate DIY repair, 30-45 minutes.
Bacteria buildup in the venting assembly and drain hose. Replaced them and it's back to normal Read more
The Water Inlet Fill Hose is an OEM part for Bosch dishwashers. This part is responsible for safely and efficiently connecting the dishwasher to your home's water supply, ensuring that water flows into the dishwasher at the correct pressure and volume for optimal cleaning performance.
Over time, the Water Inlet Fill Hose can become susceptible to wear and tear, leaks and blockages.
Symptoms indicating the need for a new Water Inlet Fill Hose include:
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
Replaced the Water Inlet Valve and Drain Hose. Read more
Secures the dishwasher sump or sump cover to the tub for a tight, leak-resistant seal. Replace if missing, stripped, or damaged to restore stability.
Structural frame that supports the dishwasher user interface and front fascia. Replace if cracked, warped, or broken clips cause the console to separate.
Called ApplicancePartsPros and they immediately found the specific parts I needed for my Bosch model and shipped them across the US so I had them in just 3 days (all during the virus chaos)! On the website they provided a high-def, detailed video on exactly how to take it apart, install the new replacement panel, and put it back together. Easy and accurate. While I will never buy another Bosch, I will definitely use APP for all my future parts needs! Great customer service with Midwestern... Read more
The Push Button Set is an OEM part for Bosch dishwashers. It includes all buttons needed for cycle selection and temperature adjustments on the control panel.
Causes of a bad push button set can include wear from frequent use, moisture exposure compromising electronics, or physical damage from impact or other mishandling.
Symptoms of a bad push button set include:
Wax motor for detergent/rinse-aid dispenser.
Took door off, saw that dispenser linkage was ok, I could open and close by hand, so figured the wax motor or the wiring to it were most likely the problem. I took off the wax motor ( actuator) and ran 120 volts to it via jumper wires, and it did not move at all, so figured good chance that was the problem. Found part # on your site, received new one quickly from you, put it in and works great. Thanks. Read more
Detergent not dispensing during wash cycle? This actuator arm with spring releases the detergent cup at the right time. Moderate DIY repair.
Ordered a replacement control panel and installed it according to the AppliancePartsPros.com YouTube video. Read more
Dishwasher stuck at 1 minute or won't start? A faulty main control module disrupts cycle timing and power distribution. DIY repair in 20 minutes.
A quick google of it and I that it's a common problem and the fix was to replace the control module. This site was the only one who had it in stock that I could find. Arrived within2 day window and 20 mins later it was working. Awesome support from the web chat person during the ordering process. Read more
This replacement screw secures appliance panels and internal brackets so components stay tight and aligned during everyday use. Replacing missing or stripped hardware restores a solid fit and helps minimize vibration and rattling.
Ordered parts and put them on. Read more
This factory screw secures appliance components per the original design, helping stop looseness and vibration. Replace a missing, stripped, or corroded fastener to restore a solid, rattle-free fit and protect nearby parts from damage.
Ordered parts from you and installed. I ordered the parts on Thursday evening and they arrived Saturday. Fast shipping! Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.