We use cookies and similar tools for site analytics and advertising. By using our site, you agree to this. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replacement water hose for dishwashers. Channels water between internal assemblies. Replace if cracked, brittle, leaking, or damaged to prevent leaks.
The pump sump seal repair kit contains gaskets and seals that prevent water leaks in the dishwasher's drain pump assembly. Located at the bottom of the dishwasher tub where the pump connects, these seals maintain watertight connections. Replace if you notice water pooling under the dishwasher, reduced drainage performance, or visible water leaks during operation.
Used the Bosch sump pump gasket repair kit Read more
Secures dishwasher hoses to fittings for a leak-resistant seal. Replace if worn or causing drips. Confirm fit with your model number before ordering.
Leak was slow but becoming gradually worse. Pulled dishwasher out from under counter then visually inspected sump while it ran. As soon as the water got very hot, I could see the sump leaking where it meets the stainless pan. Searched for the correct sump gasket without success. Turns out that the gasket is built into the sump for this model. The built-in gasket is very narrow (under-engineered IMHO which is probably why it developed a leak). Thanks to Simon's excellent videos at... Read more
This replacement screw secures panels, brackets, and internal parts in your appliance for a tight, rattle-free fit. Use it to replace lost, stripped, or corroded hardware and keep components properly fastened.
I had removed the frame some time ago to deal with a different issue. It turns out there are two types of screws. Apparently, when I replaced the screws, I did so randomly, and some did not quite fit the holes, and fell out and were lost over time. There are longer screws, 022 on your diagram, that fit the UPPER three holes in the dishwasher door frame. The shorter screws, 023 on your diagram, fit the lower three holes on the dishwasher door frame. The screw heads are the same, but the... Read more
Dishrack handle for Bosch dishwashers. Attaches to upper or lower rack for easy loading and unloading. Replace if cracked, broken, or missing.
This inner door panel forms the inside surface of the dishwasher door. It supports key door components and helps seal the tub, keeping water and heat contained for reliable, quiet operation.
AppliancePartsPros exploded views made it easy for me to identify the door and hinge parts that had likely been damaged. Evidently, this happens often enough that they even made a repair video for this exact misfortune. After confirming that the suspected hinge and door parts were indeed damaged, I ordered replacement parts from APP and began fretting about the door being damaged in shipping. Not to worry. Three days later, the parts arrived and the door was packaged in sealed pack foam and... Read more
The Cover is an OEM part for Bosch dishwashers. It serves as a protective barrier over vulnerable inner components. The cover helps prevent damage from spills, shields electronics from moisture, and blocks access to moving parts for safety.
Causes of a bad cover can be normal wear and tear, repeated impact damage, or improper handling during repairs.
Symptoms of a bad cover include:
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
The Control Unit is an OEM part for Bosch dishwashers. It contains the electronic components responsible for operating and monitoring all dishwasher functions and cycles.
Causes of a bad control unit can be normal wear and tear, exposed electrical components damaged by moisture ingress, or sudden failure of internal circuits/chips.
Symptoms of a bad control unit include:
Purchased the control board, replaced it in fifteen minutes. Read more
This switch is mounted on the dishwasher frame and detects when the door is properly closed to allow the wash cycle to begin. Replace it if your dishwasher won't start even with the door firmly closed, or if it stops mid-cycle unexpectedly.
REPLACED DOOR LATCH AND DOOR LATCH ASSEMBLY. EVERYTHING WORKS AGAIN. Read more
Fix excessive exterior heat or protect components with this dishwasher insulation blanket. Reduces heat transfer to maintain safe operating temperatures.
This metric M4 x 8 screw secures the toe-kick/lower access panel at the base of the appliance. Replace a missing or stripped fastener to keep the kickplate tight and aligned, helping prevent looseness and noise.
I went on your very user friendly website and looked up my bosch dishwasher. I love your diagrams and I felt confident that I could figure out what we possibly needed to get the door to close correctly and get the washer back working again. Your staff is courteous, service was fast and I would definitely recommend Appliance Parts Pros. Read more
This is the lower housing or base case that forms the bottom enclosure of the dishwasher. It provides structural support and helps contain water and components beneath the wash tub. Replace this part if it is cracked, warped, or leaking from the base of the unit.
Replacement cup rack for dishwashers. Installs inside the tub to hold cups and mugs during wash cycles. Replace if prongs are broken or plastic is cracked.
I researched the model number & discovered appliance pros on the Brilliant Distinctions (Botox) website. The website is user friendly & I entered the model #, and was directed to a diagram that showed the exact part & reference number. I ordered the parts, and received them via Fed Ex. Very easy! I'll be back when I need additional replacement parts. Read more
Cutlery basket frame for Bosch dishwashers. Organizes and supports forks, knives, and spoons. Replace if cracked, broken, or damaged from wear.
This protective cover sheet mounts to the appliance's frame to shield and support nearby components. Replacing a damaged or missing panel helps keep wiring and mechanisms protected and securely mounted, reducing vibration and preventing premature wear.
This support is a factory replacement component that holds and stabilizes a specific part within your appliance so it stays aligned and secure. Replacing a cracked or missing support restores proper fit and helps prevent noise or binding.