She68t55uc Parts

The Dishwasher Water Inlet Valve is an OEM part for Bosch dishwashers that is responsible for controlling the flow of water into the dishwasher at the start of each wash cycle. The water inlet valve opens to allow water to enter the dishwasher and then closes to ensure the correct amount of water is used during the cycle.  

Symptoms of a bad Dishwasher Water Inlet Valve include:

• Inadequate water filling the dishwasher.
• Overfilling, which can cause leaks and potential water damage.
• Unusual noises coming from the valve area.
• The dishwasher not starting.

Causes of a bad water inlet valve can vary from mineral buildup from hard water, which can block the valve, to mechanical failure or wear and tear over time. Electrical issues can also affect the valve's operation, preventing it from opening or closing properly.

This OEM Bosch part can also be used on Thermador and Gaggenau appliances.

The Spray Arm Water Supply Tube is an OEM replacement part for Bosch dishwashers. This tube is responsible for directing water from the dishwasher’s pump to the spray arms, ensuring that dishes are thoroughly cleaned during the wash cycle. Per Bosch this part includes 10027073.

Over time, the spray arm water supply tube can become clogged with debris, develop cracks, or suffer from wear and tear due to regular use. Issues such as mineral buildup, damage from loading and unloading dishes, or general deterioration can affect its performance.

Symptoms of a bad spray arm water supply tube include:

• Poor cleaning performance with food particles left on dishes
• Low water pressure at the spray arms
• Leaks inside the dishwasher
• Unusual noises during the wash cycle

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Detergent Dispenser is an OEM replacement part for Bosch dishwashers. It is located inside the dishwasher and is responsible for properly delivering detergent at the appropriate time during wash cycles. The detergent dispenser has a compartment that holds detergent tablets or pods, and a mechanism that releases the correct amount to efficiently clean dishes.

Causes of a bad dispenser can include clogging or blockage in the dispenser mechanism, damage to the dispenser door or latch, or malfunctioning electronic components that control the dispensing process.

Symptoms of a bad detergent dispenser include:

• Detergent not dispensing or residue left in the dispenser
• Dirty dishes due to insufficient or improper detergent delivery
• Corrosion or buildup inside the dispenser area
• Dispenser door or cover cracked or damaged

This genuine Bosch OEM replacement part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Insert is an OEM replacement part for Bosch dishwashers. It is located inside the wash tub and helps direct water flow during cycles.

Causes of a bad insert can include regular wear and tear, damage from heavy or improperly loaded items, or warping due to exposure to high temperatures and detergents.

Symptoms of a faulty insert include:

• Poor cleaning performance, even on heavily soiled items
• Concentrated residue in certain areas of the tub or racks
• Standing water droplets inside the tub post-cycle

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This operating module is the electronic control that manages cycle selection and timing so your appliance runs programmed wash and dry sequences correctly. It replaces a failed or unresponsive control module to restore normal cycle operation. What it does:

• Controls program selection, timing, and sequence logic for cycles
• Communicates with user interface and sensors to advance or end cycles
• Common symptom: touchpads or knobs respond but cycles do not start or complete

• One operating module

• Disconnect power to the appliance before beginning any repair
• Access typically requires removal of the control panel or console; retain fasteners for reinstallation
• Take care with connectors and ribbon cables—avoid bending pins or forcing plugs
• Test operation before fully reassembling the appliance

This overflow component directs excess water safely back into the dishwasher's water path to help prevent overfilling and leaks. Replace if damaged to restore correct water management and leak protection.

• Guides overflow water away from the tub into the proper return/drain path
• Helps maintain correct water level during fill
• Can address water collecting in the base pan or leaking from the lower front area
• Useful when the leak protection/float has been tripped or cycles stop due to a detected leak

• Disconnect power and turn off the water supply before servicing
• Access the overflow/water-channel area per your model's service procedure
• Note orientation and transfer any clips or seals from the old part if present
• Reassemble, restore power/water, and run a short cycle to check for leaks

This cable harness routes power and control signals between the appliance's control and its components. Replacing a damaged harness restores solid electrical connections so the unit starts, runs, and completes cycles without intermittent failures or non-working functions. What it does:

• Distributes electrical power and control signals between boards, motors, valves, and sensors
• Replaces wiring that is burnt, brittle, frayed, or corroded
• Helps resolve symptoms like won't start, intermittent operation, inoperative features, or error/fault indications related to open/shorted circuits
• Restores safe, reliable connectivity to prevent further electrical damage

• 1 cable harness assembly

• Disconnect power at the breaker or unplug the appliance before servicing
• Photograph/label connections and routing to match the original layout
• Seat connectors fully by the housings; do not pull on wires
• Route and secure away from sharp edges, moving parts, and hot surfaces to avoid chafing or heat damage

This insulating part provides a non-conductive, heat-resistant barrier between adjacent components inside the appliance. Replacing a damaged insulator helps prevent unintended contact and heat transfer, supporting safe, reliable operation and protecting nearby parts. What it does:

• Electrically isolates terminals or metal surfaces to help prevent shorts or arcing
• Reduces heat transfer to surrounding components
• Maintains proper spacing and support for the protected component
• Replace if the original is cracked, deformed, missing, or shows burn/discoloration

• 1 insulating part

• Disconnect power before servicing; shut off gas or water if applicable
• Access the component, note orientation/positioning of the original insulator, and transfer any clips or hardware as required
• Seat the new insulator fully and ensure no conductive parts touch unintended surfaces
• Reassemble, restore power, and verify normal operation with no rubbing, arcing, or overheating

This insert is a replacement rack insert designed to restore proper item support and organization inside the appliance. It helps keep dishes and utensils secure so they wash and dry more effectively. What it does

• Replaces a damaged or missing rack insert that no longer holds items securely
• Restores proper spacing and support to prevent shifting or tipping during cycles
• Helps reduce chipping and breakage caused by loose items
• Can improve wash coverage by keeping items in the intended position

• One rack insert as shown

• Remove power and water supply to the appliance before servicing
• Slide out the affected rack and snap or slide the insert into the matching slots; no special tools typically required
• Inspect adjacent clips and rails for wear and replace if damaged

This fascia panel is the exterior door trim that restores the appliance's front appearance and protects internal door components. It gives a clean, finished look and provides the mounting surface for the control area. What it does:

• Replaces a damaged, dented, or scratched door-facing trim to improve appearance
• Covers and protects the underlying inner door and control assembly from debris
• Provides the finished surface for buttons or control openings
• Helps maintain proper alignment and fit of the door face

• One fascia panel as shown

• Removal of the outer door trim and any attached trim clips or screws required; handle with care to avoid scratching the replacement
• Disconnect power or follow manufacturer safety procedures before servicing door controls or electrical components
• Use factory fasteners and alignment points
• If any control components or insulation are attached to the old panel, transfer them to the new panel per manufacturer guidance