She9er55uc/52 Parts

The Power Supply Unit is an OEM part for Bosch dishwashers. This part is responsible for supplying the necessary power to your dishwasher. It delivers reliable and consistent power to all the electrical parts of your dishwasher.  

A bad power supply unit can occur due to electrical faults, power surges, or normal wear and tear over time. Signs of a faulty power supply unit include the dishwasher not turning on, intermittent power loss, or electrical issues within the dishwasher.

Symptoms of a bad power supply unit include:

• The dishwasher not turning on 
• Intermittent power loss  
• Flickering lights  

Replace your faulty dishwasher power supply unit with this genuine OEM Bosch part to restore your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

This replacement foot is the leveling support at the base of your appliance. It helps set the height and keep the unit stable and level, reducing wobble, vibration, and noise for smoother, quieter operation.

• Supports the appliance base and provides solid floor contact
• Allows height/leveling adjustment as designed by the unit
• Helps correct rocking, vibration, walking, or door misalignment caused by an unlevel appliance
• Replace if the foot is cracked, missing, worn, or stripped and won't hold adjustment

• Disconnect power; shut off water supply if applicable
• Protect flooring and have a helper steady or move the unit
• Remove the damaged foot; install the new foot per the mounting style (threaded or push-in)
• Adjust height to level the cabinet and stability at all corners

The Fine Filter is an OEM part for Bosch dishwashers. It is designed to trap small food particles and debris before they can clog other areas of the dishwasher.

The fine filter is positioned inside the dishwasher tub and spray arms to act as a preliminary filter. It helps keep the wash and rinse zones free of obstructions to allow for the best cleaning performance.

Causes of a faulty fine filter are normal product usage over time, accumulation of stubborn food or mineral deposits, and occasional damage from sharp dish edges

Symptoms of a bad fine filter include:
Buildup of muck or grime that cannot be cleaned
Torn or damaged mesh that no longer traps particles
Improper drainage or water not circulating as it should
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This insulating plate serves as the microwave's waveguide cover. It shields the waveguide opening from steam and splatter while allowing energy to enter the cavity, helping prevent arcing and protecting internal components and cavity surfaces.

• Shields the waveguide/magnetron opening from grease and moisture
• Electrically insulates the feed area to reduce arcing
• Helps maintain proper microwave energy distribution into the cavity
• Common signs of failure: sparking from the side wall, burn marks on the cover, sizzling/burning odor during cooking, or a visibly cracked/charred plate

• Disconnect power before servicing; never operate the microwave without this cover installed
• Remove the retaining screw or release tabs, note orientation, and seat the new plate flush over the waveguide opening
• If arcing occurred, clean any carbonized residue from the cavity surface before installing the replacement

This repair set is a small service kit for Bosch appliances that replaces worn service parts to restore normal operation and stop minor leaks or performance issues. It's a compact, technician-friendly kit for quick component swaps. What it does

• Replaces small service components and seals that can wear over time
• Helps stop minor leaks commonly caused by deteriorated gaskets or O-rings
• Can reduce noise or vibration linked to loose or damaged small parts
• Restores proper sealing and mechanical fit where original small components have failed

• One repair set

• Recommended for technicians or experienced DIYers; inspect surrounding parts for related wear
• Turn off and unplug the appliance and shut off water supply before starting work
• Use basic hand tools; avoid over-tightening fasteners to prevent damage

The Dishwasher Hinge Lever is an OEM replacement part for Bosch dishwashers. This hinge lever is crucial for the operation of the dishwasher door, supporting smooth movement as it opens and closes. It works alongside the door springs to provide balanced tension, ensuring that the door stays securely in place when opened or closed. 

Over time, hinge levers may wear out due to regular use, strain from overloading the door, or corrosion from prolonged exposure to moisture. A damaged hinge lever can disrupt the door’s movement, leading to issues with opening, closing, or improper sealing of the dishwasher door.

Symptoms of a bad Dishwasher Hinge Lever include:

• Difficulty opening or closing the dishwasher door
• The door dropping open without resistance
• A loose or sagging door that won’t stay securely in place
• Unusual noises when moving the door 

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Replacement door hinge that restores proper door alignment and smooth opening/closing for compatible Bosch appliances. Simple, direct support for the door pivot to reduce sagging, uneven closing, and noisy operation. What it does:

• Supports the appliance door pivot and maintains correct door alignment during use.
• Helps stop door sagging, uneven gaps, and doors that don't close or latch reliably.
• Restores smooth opening and closing and reduces hinge-related noise.
• Works as the mechanical pivot/connection between the door and cabinet frame.

• Turn off power and disconnect the appliance (and water supply if applicable) before starting any repair.
• Support the door while removing/installing the hinge to prevent damage or injury.
• Use the original mounting hardware or manufacturer-recommended fasteners; tighten securely but avoid overtightening.
• After installation, check door alignment and operation; adjust as needed per manufacturer instructions.

Spring-style hose clamp that secures flexible water hoses to fittings on select appliances, helping maintain a leak-tight connection at hose joints. Keeps hoses seated to reduce leaks and ensure reliable water flow. What it does:

• Holds flexible inlet, drain, or circulation hoses tightly on barbed fittings and nipples.
• Prevents leaks and water loss at hose connections by maintaining steady clamp pressure.
• Common signs it needs replacement: dripping or pooling near hose connections, a loose or wobbly hose, or visible clamp corrosion or deformation.
• Small, inexpensive part that restores a secure hose connection when the original clamp has failed.

• Always disconnect power and shut off the water supply before servicing appliance plumbing.
• For spring-style clamps, use pliers to open the clamp, position it over the hose, and release slowly so it seats properly; ensure the hose is fully pushed onto the fitting.
• Inspect the hose and fitting for damage; replace the hose if cracked or excessively worn before installing a new clamp.
• Wear eye protection when compressing or releasing spring clamps to avoid injury from sudden release.

Trim strip that finishes and protects an appliance edge while helping hold panels or seals in place. Replacing a damaged strip restores a clean fit and reduces gaps, vibration, and exposure to sharp edges. What it does:

• Covers and protects exposed metal or panel edges — symptom: visible edge damage or chipping.
• Helps secure panel or seal edges to maintain proper fit — symptom: loose or gapped panels.
• Reduces noise and vibration between parts — symptom: rattling or buzzing during operation.
• Helps limit moisture or debris intrusion where panels meet — symptom: dampness or dirt accumulation along seams.

• Disconnect power to the appliance before starting any work; follow lockout/tagout if applicable.
• Remove the old strip and any adhesive or fasteners; inspect the mounting surface for damage.
• Align the replacement strip, then press or snap it into position; some applications may require clips or screws.

This genuine replacement seal provides a watertight connection where components join, helping prevent leaks and maintain normal appliance performance. Use when an old or damaged seal allows water to escape or pooling occurs. What it does:

• Creates a tight seal between mating parts to stop water leaks
• Restores proper sealing at appliance joints or hose connections
• Helps prevent water damage and reduces the chance of intermittent leaks
• Commonly replaced when a seal is cracked, flattened, or missing

• Turn off power and water supply before replacing the seal.
• Clean and dry mating surfaces thoroughly before installing the new seal.
• Ensure correct orientation and proper seating so the seal sits evenly in the groove.
• Inspect adjoining parts for wear; replace damaged components to ensure a proper seal.

The Adapter is an OEM part for Bosch dishwashers. It is used to connect the dishwasher water inlet hose to the internal water supply component. Proper sealing and connections are critical for leak-free dishwasher operation.

Causes of a bad hose adapter can include mineral buildup interfering with the seal, cracks developing from repeated heating and cooling cycles, or accidental damage during hose handling.

Symptoms of a bad hose adapter include:

• Water leaks at the hose connection point
• Mineral deposits or residue left around the area
• Reduced water pressure or flow to internal components
• Inability to establish a tight seal when connecting the hose

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This sealing is a molded rubber gasket that provides a watertight barrier where two appliance components meet, helping prevent leaks and water damage. It's a direct-fit replacement when the original seal is cracked or worn. What it does:

• Creates a watertight seal to help prevent leaks during operation
• Restores proper sealing where the original gasket has become brittle, torn, or flattened
• Helps maintain appliance performance by keeping water inside the wash/tub area
• Reduces risk of water damage to cabinetry or floors from failing seals

• One sealing

• Disconnect power and water supply before beginning any repair
• Verify mating surfaces are clean and dry; remove any old sealant or debris for a proper fit
• Inspect the replacement for damage before installing and align evenly to avoid pinching

This spray arm is the rotating water distributor that delivers pressurized spray to clean dishes in compatible Bosch dishwashers. Replacing a damaged or clogged spray arm restores proper water coverage and cleaning performance. What it does:

• Spins and disperses wash water across the lower/middle rack to remove food and soils
• Helps maintain even water distribution for consistent cleaning results
• Can reduce spotting and missed-soil areas when functioning correctly
• Common symptom: noisy operation, poor spray coverage, or visible cracks/blocked jets

• One spray arm

• Turn off power and water supply before starting any repair
• Inspect mounting hub and seals; replace damaged clips or gaskets as needed
• Remove items from dishwasher racks for easier access; follow OEM instructions for removal and reinstallation
• If jets are clogged, clean before reinstalling to prevent reoccurrence

The Thread Bolt is an OEM part for Bosch dishwashers. It serves as a fastening component, securing the water inlet in place and ensuring a proper water supply connection.

Causes of a malfunctioning Thread Bolt can include cross-threading or over-tightening during installation, leading to stripping or damage.  

Symptoms of a bad Thread Bolt include:

• Leaks around the water inlet area Loose or rattling water inlet valve 
• Difficulty in accessing or removing the valve assembly 

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.