Shpm65n55/01 Parts

The Dishwasher Water Inlet Valve is an OEM part for Bosch dishwashers that is responsible for controlling the flow of water into the dishwasher at the start of each wash cycle. The water inlet valve opens to allow water to enter the dishwasher and then closes to ensure the correct amount of water is used during the cycle.  

Symptoms of a bad Dishwasher Water Inlet Valve include:

• Inadequate water filling the dishwasher.
• Overfilling, which can cause leaks and potential water damage.
• Unusual noises coming from the valve area.
• The dishwasher not starting.

Causes of a bad water inlet valve can vary from mineral buildup from hard water, which can block the valve, to mechanical failure or wear and tear over time. Electrical issues can also affect the valve's operation, preventing it from opening or closing properly.

This OEM Bosch part can also be used on Thermador and Gaggenau appliances.

The Spray Arm Water Supply Tube is an OEM replacement part for Bosch dishwashers. This tube is responsible for directing water from the dishwasher’s pump to the spray arms, ensuring that dishes are thoroughly cleaned during the wash cycle. Per Bosch this part includes 10027073.

Over time, the spray arm water supply tube can become clogged with debris, develop cracks, or suffer from wear and tear due to regular use. Issues such as mineral buildup, damage from loading and unloading dishes, or general deterioration can affect its performance.

Symptoms of a bad spray arm water supply tube include:

• Poor cleaning performance with food particles left on dishes
• Low water pressure at the spray arms
• Leaks inside the dishwasher
• Unusual noises during the wash cycle

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Detergent Dispenser is an OEM replacement part for Bosch dishwashers. It is located inside the dishwasher and is responsible for properly delivering detergent at the appropriate time during wash cycles. The detergent dispenser has a compartment that holds detergent tablets or pods, and a mechanism that releases the correct amount to efficiently clean dishes.

Causes of a bad dispenser can include clogging or blockage in the dispenser mechanism, damage to the dispenser door or latch, or malfunctioning electronic components that control the dispensing process.

Symptoms of a bad detergent dispenser include:

• Detergent not dispensing or residue left in the dispenser
• Dirty dishes due to insufficient or improper detergent delivery
• Corrosion or buildup inside the dispenser area
• Dispenser door or cover cracked or damaged

This genuine Bosch OEM replacement part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Toe Panel Support Bracket is an OEM part for Bosch dishwashers. This part provides support and stability to the toe panel, which is the panel at the bottom of the dishwasher's front.

Causes of a bad part can include physical impact, improper installation, or general wear and tear over time, leading to weakening or damage of the support bracket.

Symptoms of a bad Toe Panel Support Bracket can include:

• Looseness or instability of the toe panel
• The toe panel becoming detached or falling off
• Difficulty in properly aligning or installing the toe panel
• Visible damage or cracks in the support bracket itself

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Power Module Programmed is an OEM component specifically designed for Bosch dishwashers. It houses the integrated control board that oversees all critical dishwasher functions including cycle selection, temperature regulation, leak detection, and timing of the various wash and rinse stages.

Symptoms of a bad power module can include:

• Faulty or non-responsive controls 
• Inability to select or advance through cycles
• Flashing error codes on the display
• Abnormal sounds or smells from the unit

Causes of failure include wear over time leading to shorts or opens in the circuitry, moisture damage corroding connections, or software bugs in the onboard programming.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers. Replace to restore full cycle functionality and extend the life of your dishwasher.
 

This is a package of 4 wheels.

The lower wheel kit is an OEM part for Bosch dishwashers. This lower wheel kit is designed to smoothly guide dishes in and out of the dishwasher.

Causes of a bad wheel can include wear and tear over time, cracks or breaks in the rollers, misalignment preventing proper motion, or material degradation allowing for stickiness or gumming.

Symptoms of a bad wheel include:

• Dishes not fully entering or exiting the wash chamber
• Scratches or damage to dishware
• Noisy operation of the wheel assembly
• Racks getting stuck

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This outer door panel restores the dishwasher's front appearance and protects internal door components from damage and moisture. It provides a clean finish and supports mounting for trim and hardware when in good condition. What it does:

• Covers and protects the inner door assembly from water, dirt and everyday wear.
• Provides the finished exterior surface and attachment point for the handle/trim hardware.
• Helps maintain proper door alignment and sealing when not dented or warped.
• Common symptoms: visible dents, scratches, rust or a damaged exterior that affects appearance or function.

• Disconnect power to the appliance before beginning any work.
• Remove the inner door trim and retain all fasteners; some components may need to be transferred to the new panel.
• Handle the panel carefully — it can be awkward and may have sharp edges.
• If seals, insulation, or trim are damaged, replace or re-seat them during reassembly; test the door for proper fit and operation after installation.

This trim strip finishes and protects the exposed edge of the appliance where it installs, helping secure adjacent panels and giving a clean, finished look. Replacing a damaged strip can improve fit and appearance.

• Provides a finished edge and helps secure panels or covers in place
• Helps prevent gaps that can collect debris
• Common fix when the existing strip is cracked, bent, loose, or missing
• Reduce rattles or vibrations caused by an ill-fitting trim piece

• Disconnect power and shut off any utilities before servicing
• Note orientation/position of the old strip before removal
• Press or fasten the new strip into the same mounting points; do not force
• After installation, recheck clearances and panel alignment

This insulating part provides a non-conductive, heat-resistant barrier between adjacent components inside the appliance. Replacing a damaged insulator helps prevent unintended contact and heat transfer, supporting safe, reliable operation and protecting nearby parts. What it does:

• Electrically isolates terminals or metal surfaces to help prevent shorts or arcing
• Reduces heat transfer to surrounding components
• Maintains proper spacing and support for the protected component
• Replace if the original is cracked, deformed, missing, or shows burn/discoloration

• 1 insulating part

• Disconnect power before servicing; shut off gas or water if applicable
• Access the component, note orientation/positioning of the original insulator, and transfer any clips or hardware as required
• Seat the new insulator fully and ensure no conductive parts touch unintended surfaces
• Reassemble, restore power, and verify normal operation with no rubbing, arcing, or overheating

This replacement outer door restores the finished exterior of the appliance door, protecting inner components and bringing back a clean, secure fit when the original is damaged or missing. It's also known as the outer door panel/skin. What it does

• Provides the exterior surface of the door and mounting points for trim or handle (model dependent)
• Shields the inner door assembly from impacts and wear
• Helps maintain proper door alignment and smooth operation
• Common symptoms: dents, cracks, broken tabs, loose or rattling door panel

• One outer door

• Disconnect power before servicing; wear cut-resistant gloves
• Open the door and support the panel while removing perimeter fasteners
• Transfer any reusable hardware, trim, or insulation from the old panel as needed
• Reinstall fasteners without overtightening and verify door alignment and operation

This replacement control panel button restores a worn, broken or missing push button so your appliance's controls can be operated easily and reliably. It matches the original shape and snap-fit for a clean finish. What it does

• Acts as the user interface button on the appliance control panel for selecting cycles or features
• Replaces cracked, stripped, loose or missing buttons that won't depress or return properly
• Helps restore tactile feedback and proper button travel for responsive control input
• Prevents debris and moisture from entering the switch area when installed correctly

• Replacement control panel button (single)

• Power off and disconnect the appliance before attempting any repair
• Typically installs by snapping into the control panel; access may require removal of the front panel or control console
• Avoid forcing the part; align tabs and press evenly until it clicks into place
• If the underlying switch or actuator is damaged, replace both components to ensure proper function