Shx3ar55uc Parts

This insulating part restores the factory isolation and protection between components inside your appliance. Replacing a worn or missing insulator helps prevent damage from heat or contact so the unit operates safely as designed. What it does:

• Provides the specified insulation and spacing where installed
• Helps prevent heat transfer, shorting, or abrasion between adjacent parts
• Restores proper fit when the original insulator is cracked, deformed, or missing
• Common signs include discoloration, charring, brittleness, or the old piece crumbling/falling out

• 1 insulating part

• Disconnect power and allow the appliance to cool completely before service; shut off water or gas if applicable
• Note the original orientation and placement; take photos for reference
• Install without over-compressing; ensure it seats flat and does not interfere with nearby parts
• Reassemble, restore power, and test for normal operation

This suspension damper stabilizes the tub/drum by absorbing movement and vibration during operation. Replacing a worn damper helps reduce shaking and noise, improving spin performance and overall machine stability. What it does:

• Absorbs and controls tub/drum movement to reduce vibration and noise
• Helps prevent banging, "walking," or out-of-balance shutdowns during spin
• Can address excessive shaking, rattling, and longer spin times
• Restores smoother, more controlled operation when the original damper is worn

• One suspension damper

• Disconnect power and turn off water supply before servicing
• Access location varies by model; support the tub/drum to relieve load before removal
• Note orientation and reuse existing mounting hardware if new fasteners aren't provided
• After installation, re-level the appliance and run a test cycle to verify stability

This lock clamp is a small retaining clip that secures a component or connection inside the appliance. It keeps parts firmly seated and aligned to help prevent loosening, misalignment, or accidental disconnection during normal operation.

• Locks and retains the associated fitting or component in place
• Maintains a secure, correctly aligned connection
• Helps resist vibration-related movement during use
• If worn, broken, or missing, you may notice a loose connection, rattling, parts separating, or leaks at the joint

• Disconnect power; shut off water supply if the repair involves a water path
• Note the clip's orientation/position before removal (take a quick photo for reference)
• Use needle-nose pliers or a small flat-blade tool to release/install; avoid over-bending
• The component is fully seated and the clip is fully engaged before reassembly

This is a replacement push button for the appliance control panel that restores tactile operation for a worn or broken key. Installing the correct button returns a responsive, easy-to-use control surface. What it does:

• Replaces a damaged or missing control panel button so the corresponding function can be selected again
• Restores tactile feedback for reliable user input
• Helps fix symptoms such as a stuck, cracked, or non-responsive button on the control console
• Works as the external user-facing actuator — does not include internal switches

• One (1) replacement push button

• High-level replacement: remove the console or control panel trim to access the button; follow OEM disassembly steps
• Handle parts gently to avoid damaging tabs or clips; align button with its mounting posts before snapping into place
• Disconnect power to the appliance before starting work to avoid shock or accidental activation

This dishwasher cup shelf mounts to the upper rack to hold cups, mugs, stemware, and small items securely. Replace a broken or missing shelf to keep items upright and organized throughout the wash cycle.

• Provides a platform on the upper rack for cups, mugs, stemware, and small items
• Helps keep items upright and reduces movement during wash and rinse
• Restores proper loading when the original shelf is cracked, loose, or missing
• Common signs: broken mounting tabs, shelf won't stay in place, cups tipping over

• Unload the upper rack; removing the rack can make access easier
• Align the shelf's mounting tabs with the rack wires and snap firmly into place
• Confirm the shelf moves freely and does not interfere with the spray arm
• Test with a light load to ensure secure placement before full use

This is a replacement push button for Bosch appliance control panels. It restores a missing, broken, or unresponsive button so you can select cycles and settings with a secure, tactile feel. What it does:

• Acts as the user-facing pushpiece that engages the underlying control switch
• Restores reliable button travel and tactile feedback when original button is cracked, stuck, or missing
• Helps resolve symptoms like buttons that won't depress, intermittent or no response from a control, or visible button damage
• Replaces cosmetically worn or discolored buttons to improve panel appearance

• Disconnect power (unplug or turn off breaker) before servicing the appliance
• Replacement typically snaps into the front control panel; panel removal may be required for access
• Handle gently and avoid forcing parts; ensure proper orientation before snapping into place

This is a single replacement mounting screw used to secure panels, trim, or components on compatible appliances. It restores proper fit and prevents parts from coming loose or vibrating during operation. What it does

• Secures panels, brackets, or components in place to maintain appliance alignment
• Stops rattling or vibration caused by loose fasteners
• Helps ensure switches, doors, or trims stay properly seated
• Replaces missing or stripped screws to restore original fit

• One replacement screw

• Use the correct driver and size; start threads by hand to avoid cross-threading
• Tighten securely but avoid over-torquing which can strip threads or crack plastic
• Disconnect power and follow appliance safety precautions when accessing internal parts

The Dishwasher Handle End Cap is an OEM part for Bosch dishwashers. This part provides a finishing touch to the dishwasher's door handle, covering the ends for a smooth, finished appearance. Over time, these end caps can become lost, damaged, or worn, affecting the overall look and use of the dishwasher.

Symptoms of a bad Dishwasher Handle End Cap include:

• Missing or loose end caps
• Visible damage or wear 
• Diffiuculty opening the door

Causes of a bad handle end cap can range from accidental damage during cleaning or use, to natural wear and tear from repeated handling. 

This OEM Bosch part can also be used on Thermador and Gaggenau appliances.

This stress relief is a small strain-relief clip that protects wiring where the harness passes through the cabinet, reducing pull and chafing on connections. Replacing a worn clip helps prevent loose wires and intermittent electrical issues. What it does:

• Secures the appliance wiring at an entry point to reduce strain on terminals and connectors.
• Prevents chafing and abrasion of wire insulation where harnesses pass through the cabinet or mounting openings.
• Can reduce symptoms such as intermittent power, flickering controls, or visible loose/frayed wires at the harness.
• Simple mechanical part: no electrical function but critical for long-term wiring reliability.

• Disconnect power (unplug appliance or switch off breaker) before accessing wiring; turn off gas supply where applicable.
• Remove panels as needed to access the harness entry; seat the clip fully so wires are routed through the relief, not pinched.
• Inspect surrounding wiring and replace any frayed or damaged wires; do not use the clip to conceal damaged wiring.

This insulating part cushions and thermally isolates internal components to help reduce heat transfer and vibration noise in the appliance. It's a small replacement piece that restores proper spacing and protection around sensitive parts. What it does:

• Provides thermal separation between hot components and surrounding cabinet parts to help prevent heat damage
• Cushions components to reduce vibration and rattling noises during operation
• Helps maintain correct part clearances for safe, reliable performance
• Used where original insulation was damaged, missing, or deteriorated

• Disconnect power and, if applicable, water before beginning any repair
• Handle carefully; avoid compressing or tearing the insulation during installation
• Verify correct orientation and secure fit against the intended component or cabinet surface

This adjusting device helps align and fine-tune moving parts so doors and components operate smoothly. It's a direct-fit replacement designed to restore proper adjustment and reliable positioning for compatible Bosch appliances. What it does:

• Provides precise adjustment of movable assemblies to correct alignment issues
• Helps reduce binding, rubbing, or uneven gaps at doors or panels
• Restores intended movement and positioning for better operation
• Works as the factory replacement part specified for alignment tasks

• One adjusting device

• Designed for direct replacement; use the appliance's service instructions or OEM guide for correct placement
• Turn off power to the appliance before servicing to avoid injury
• Keep fasteners and mounting orientation the same as the original part during installation

This outer door is the dishwasher's front outer panel that restores the door's appearance and protects internal components from damage. Use it when the door is dented, scratched, or cracked to improve looks and function. What it does:

• Replaces the exterior front panel of the dishwasher door
• Protects internal door components and insulation from impact or moisture exposure
• Restores a smooth, secure surface for the handle and control area
• Helps stop drafts or rattling caused by a damaged outer panel

• One outer door

• Disconnect power and water to the appliance before starting any work
• Remove the inner door liner and any attached trim or hardware to access outer panel fasteners
• Handle glass or painted surfaces carefully to avoid chips, scratches, or breakage