Shx8er55uc Parts

The Thread Bolt is an OEM part for Bosch dishwashers. It serves as a fastening component, securing the water inlet in place and ensuring a proper water supply connection.

Causes of a malfunctioning Thread Bolt can include cross-threading or over-tightening during installation, leading to stripping or damage.  

Symptoms of a bad Thread Bolt include:

• Leaks around the water inlet area Loose or rattling water inlet valve 
• Difficulty in accessing or removing the valve assembly 

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Funnel is an OEM part for Bosch dishwashers. It helps accurately guide water from the inlet valve onto wash arms and other components inside the dishwasher.

As water flows through the funnel during each cycle, small debris particles can become trapped. Over time, a buildup of mineral deposits or grime occurs inside the funnel.

Causes are normal mineral accumulation from hard water, along with food particles or grit trapped during dishwasher use.

Symptoms of a bad funnel include:

• Reduced or uneven water pressure to spray arms
• Clogs or blockages that hamper water flow
• Mineral deposits visible inside the funnel

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Dishwasher Installation Set is an OEM part for Bosch dishwashers. This set contains all necessary hardware for professional installation or replacement, including leveling legs, mounting brackets and anti-tip brackets. Manufactured from corrosion-resistant steel, these parts securely fasten the dishwasher into place.

Causes relate to normal wear over time from use. Improper original installation may also compromise individual parts. Failing to properly level, brace or anchor the dishwasher leads to unnecessary stresses.

Symptoms of worn or missing installation hardware include:

• Looseness, shaking or movement during operation
• Doors failing to properly self-close or seal fully
• Leaks developing around dishwasher connections
• Installation not compliant with current regulations

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This water softener assembly conditions incoming dishwasher water to reduce mineral buildup and improve wash performance. It helps prevent hard-water spots and cloudy glassware for clearer, cleaner results. What it does:

• Removes or binds hardness minerals from incoming water to reduce limescale and spotting
• Helps maintain detergent effectiveness for better cleaning and rinsing
• Reduces mineral buildup inside the wash system and on dishes and glassware
• Supports consistent wash performance in areas with hard water

• One water softener assembly

• Disconnect power and shut off the water supply before servicing
• Inspect and replace any seals or gaskets if damaged; use manufacturer-recommended parts
• Handle the unit carefully to avoid damage to connectors or mounting features
• Refer to the dishwasher service manual or OEM installation instructions for exact placement and wiring

This temperature sensor (thermistor) measures appliance temperature and sends a signal to the control board so the unit can maintain proper cooling cycles. Replaces a failed or intermittent sensor for more reliable temperature control. What it does:

• Detects internal temperature and provides a changing resistance signal to the control board
• Helps the control board regulate compressor and fan operation for consistent cooling
• Commonly linked to symptoms like incorrect temperatures, frequent cycling, or related error codes
• Works as a direct-replacement sensing element

• One temperature sensor (thermistor) as pictured

• Disconnect power before servicing to avoid shock or damage
• Handle the sensor and wiring gently; avoid kinking or pinching the harness
• Access may require removing interior panels or covers; keep mounting hardware for reinstallation
• Test with a multimeter or follow OEM service instructions before replacement

This retaining nut secures threaded connections on compatible Bosch appliances to keep components tight and stable during operation. A small replacement that restores proper fastening and prevents parts from loosening. What it does:

• Fastens and secures mating threaded components to maintain mechanical stability
• Prevents vibration-induced loosening of attached parts
• Helps maintain proper alignment of secured components during use
• Can stop intermittent movement or rattling caused by a missing or damaged nut

• Turn off and unplug the appliance before servicing to avoid shock or injury
• Verify correct nut location and thread engagement before tightening; do not force threads
• Tighten to snug fit—avoid overtightening which can strip threads or damage components

The CONTAINER is an OEM part specifically designed for Bosch dishwashers. As the wash tub interior, it rotates spray arms utilizing spray jets to thoroughly clean soiled dishes and cookware. 

Causes of a faulty container can include mineral deposits dulling jet nozzles, cracks developing from years of high pressure spray, or damage allowing leakage.

Symptoms of a bad container include: 

• Inefficient cleaning leaves persistent food residues  
• Puddles or stains around the base after cycles
• Vibration or grinding noises at higher wash levels

Compatible with Thermador, Gaggenau, or Kenmore models, replacement maintains cleaning abilities and prevents future leaks.

This outer door panel is the exterior front skin of the door assembly. It restores the appliance's appearance and shields internal door components when the original panel is dented, bent, or otherwise damaged.

• Forms the visible outer surface of the door and mounts over the inner door assembly
• Shields internal door components from impact and exposure
• Replaces panels that are dented, scratched, creased, or visibly worn
• Can help correct door appearance issues caused by a warped or loose outer panel

• Disconnect power before servicing; wear cut-resistant gloves
• Open and support the door; remove perimeter screws to release the outer panel
• Transfer handle/trim and any reusable hardware from the old panel to the new one
• Align the new panel and tighten screws evenly; verify smooth door operation and proper latching

This replacement hose clamp secures a hose to its fitting to maintain a tight, leak-resistant seal. Replacing a worn clamp helps stop drips and keeps fill, drain, or circulation lines firmly in place for reliable operation.

• Applies clamping force to hold a hose on a barb or stub connection
• Helps prevent leaks at hose joints
• Common symptoms: water leaking at a hose connection, hose slipping off, poor fill or drain performance
• Replace when the original is loose, corroded, distorted, or lost tension; also recommended when installing a new hose

• Disconnect power and shut off water supply before servicing
• Expect some residual water; protect the work area
• Note the clamp's position/orientation; use appropriate hand tools for the clamp style
• Ensure the hose is fully seated and clamp is secure; run a test cycle and check for leaks

This insulating part installs in the specified location to help reduce heat transfer between internal spaces and exterior panels. Replacing a worn or missing insulator helps protect nearby components and maintain proper operating temperatures.

• Provides a thermal barrier to limit heat transfer to surrounding panels and wiring
• Helps prevent scorching or heat damage to adjacent components
• Restores proper insulation where the original has deteriorated or is missing
• Common signs of failure: visible damage or fraying, burnt odor, or unusually hot exterior areas

• Disconnect power and allow the appliance to cool completely before servicing
• Wear gloves and eye protection; insulation fibers can irritate skin and eyes
• Match the original orientation/placement; do not over-compress the material
• Keep insulation clear of vents, heating elements, fans, and moving parts

This is the shelf insert used in select Bosch appliances. It fits into the shelf/tray frame to restore a flat, stable storage surface and help contain spills, so items sit level and the shelf supports its intended load.

• Sits inside the shelf frame/tray to create the usable storage surface
• A cracked, chipped, bowed, or missing insert can cause an uneven shelf or reduced load support
• Visible damage, instability, or difficulty sliding the shelf in/out are common signs it needs replacement
• Built to match the original insert's footprint for proper fit in compatible models

• Empty the shelf and carefully remove the shelf/tray from the appliance before swapping the insert
• Handle glass with care; wear cut-resistant gloves to avoid injury
• Clean the shelf frame and seat the new insert fully before reinstalling the shelf
• Avoid forcing parts against liners or trim

This holder secures a specific component or cover in your appliance, keeping it properly positioned during use. Replacing a cracked or missing holder restores correct fit, reduces rattling, and helps prevent premature wear on adjacent parts.

• Positions and supports the designated component or cover for stable operation
• Helps maintain alignment to minimize vibration or noise
• Common symptoms: broken or missing clip/ear, loose or shifting part, rattling, or a part that won't stay attached
• Direct-fit replacement to match the original holder on applicable models

• Disconnect power; shut off water or gas
• Note the orientation of the original holder and transfer any screws or fasteners
• Handle plastic tabs gently; do not overtighten fasteners
• Verify secure fit and proper operation before reassembly