We use cookies and similar tools for site analytics and advertising. By using our site, you agree to this. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Detergent releasing too early or leaking from the dispenser? This seal creates a watertight barrier to prevent premature dissolution. Easy 10-minute fix.
Replaces sliding rails that support and guide the upper dishrack along tub sidewalls. Needed when rails are cracked, worn, or broken causing binding.
I only needed a flat head screwdriver to remove the clips holding the parts in. It took all of 10 minutes and the dish washer is running great now. Read more
The Door Handle is an OEM part for Bosch dishwashers. It is installed on the outer edge of the dishwasher door and is used to open and close the door. The door handle is responsible for providing an easy and secure grip point to facilitate loading and unloading of dishes. It allows for controlled movement of the door through its range of motion. Symptoms of a bad door handle can include:
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
This repair couldn't have been easier, a few simple steps only requiring a screwdriver. And best of all, AppliancePartsPros has a video on their website showing you exactly how to perform the repair. Great! Read more
Seals the sump area to prevent leaks and ensure proper water circulation and drainage. Replace if cracked, warped, or missing. Verify fit with your model.
I searched for the problem online and found the video. It was direct and straightforward, so I just bought the parts without shopping elsewhere. . I replaced the Lid and Cover (which was missing) in the drain assembly and it’s back to normal Read more
Wire harness for dishwashers. Connects electrical components throughout the appliance frame. Replace if wires are frayed, damaged, or disconnected.
Fix intermittent operation, dead functions, or error codes with this dishwasher cable harness. Restores power and control signals between components.
Replacement water hose for dishwashers. Channels water between internal assemblies. Replace if cracked, brittle, leaking, or damaged to prevent leaks.
Replacement door handle for dishwashers. Installs on the outer door panel. Needed when your existing handle is cracked, broken, loose, or missing.
I ordered the on/off switch because I thought it was bad. It turned out to not be the switch but it was the right part and the swap was really easy. The handle order because the original one of the tabs had broken off. Both of these parts were great and easy to replace. Read more
Secures dishwasher hoses to fittings for a leak-resistant seal. Replace if worn or causing drips. Confirm fit with your model number before ordering.
Leak was slow but becoming gradually worse. Pulled dishwasher out from under counter then visually inspected sump while it ran. As soon as the water got very hot, I could see the sump leaking where it meets the stainless pan. Searched for the correct sump gasket without success. Turns out that the gasket is built into the sump for this model. The built-in gasket is very narrow (under-engineered IMHO which is probably why it developed a leak). Thanks to Simon's excellent videos at... Read more
Exterior front panel for dishwasher doors. Restores appearance when original is dented, scratched, or you want to change color. Mounts over inner assembly.
This replacement screw secures panels, brackets, and internal parts in your appliance for a tight, rattle-free fit. Use it to replace lost, stripped, or corroded hardware and keep components properly fastened.
I had removed the frame some time ago to deal with a different issue. It turns out there are two types of screws. Apparently, when I replaced the screws, I did so randomly, and some did not quite fit the holes, and fell out and were lost over time. There are longer screws, 022 on your diagram, that fit the UPPER three holes in the dishwasher door frame. The shorter screws, 023 on your diagram, fit the lower three holes on the dishwasher door frame. The screw heads are the same, but the... Read more
Dishrack handle for Bosch dishwashers. Attaches to upper or lower rack for easy loading and unloading. Replace if cracked, broken, or missing.
This is a small roller that mounts on the dish rack track inside a dishwasher, allowing the rack to slide in and out smoothly. It supports the weight of the loaded rack and guides it along the rails. Replace this roller if your dish rack is difficult to pull out, feels wobbly, or if the existing roller is cracked, worn, or missing.
The top and middle racks had broken rollers. Tracks were intact. Went to the website with the Model number. Pulled up drawings. Turns out the rollers are part of assemblies; for the middle rack "Rail-Pull out" left and right (mirror images of each other). Top: "Holder", which is a set of two. Top rack: the Holders just snap on with built-in clips. Easy. about 2 minutes per side. The Middle rack is a little more complicated. There's a spring-loaded clip that you push on, slide the rail... Read more
This is a small plastic clip that attaches to the tines on a dishwasher rack to help hold dishes, cups, or other items securely in place during the wash cycle. It snaps onto individual rack tines and prevents lightweight items from shifting or flipping over. Replace this clip if it has broken, become brittle, or gone missing, causing items to move around and not get properly cleaned.
I researched the model number & discovered appliance pros on the Brilliant Distinctions (Botox) website. The website is user friendly & I entered the model #, and was directed to a diagram that showed the exact part & reference number. I ordered the parts, and received them via Fed Ex. Very easy! I'll be back when I need additional replacement parts. Read more
The Cover is an OEM part for Bosch dishwashers. It serves as a protective barrier over vulnerable inner components. The cover helps prevent damage from spills, shields electronics from moisture, and blocks access to moving parts for safety.
Causes of a bad cover can be normal wear and tear, repeated impact damage, or improper handling during repairs.
Symptoms of a bad cover include:
This metric M4 x 8 screw secures the toe-kick/lower access panel at the base of the appliance. Replace a missing or stripped fastener to keep the kickplate tight and aligned, helping prevent looseness and noise.
I went on your very user friendly website and looked up my bosch dishwasher. I love your diagrams and I felt confident that I could figure out what we possibly needed to get the door to close correctly and get the washer back working again. Your staff is courteous, service was fast and I would definitely recommend Appliance Parts Pros. Read more