Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Drum Motor Assembly is an OEM part for LG dryers. It serves as the powerhouse that drives the drum, enabling it to tumble clothes during the drying cycle. This essential component ensures your dryer operates smoothly, providing the necessary torque for consistent and efficient drying performance.
Causes of failure might include wear and tear from prolonged use, overload from trying to dry heavy loads, electrical issues like short circuits, or physical damage to the motor components.
Symptoms of a bad Drum Motor Assembly include:
This OEM LG part is also compatible with Sears/Kenmore.
Replaced drive motor assembly. As luck would have it, the replacement motor was loud but at least ran for the entire cycle. APP was informed of the excessively noisy motor and immediately sent out a replacement, which is working just fine in relative silence. Tools used: Philips head screwdriver, channel lock pliers, 13mm socket, shop vac. Steps Disassembly 1. disconnect from power, press the on button to discharge potential residual power 2. remove top, disconnect wire harness from control... Read more
Usually ships within 4 - 14 days
Pressure sensor air chamber for washers. Connects the tub to the water level switch. Replace if cracked, clogged with detergent residue, or leaking air.
Replaced Read more
Replace your washer's drain hose if cracked, leaking, or damaged. Connects the pump to the standpipe for proper water drainage during wash cycles.
I suspected the tub gears where ready to break so I dismantled my LG WM2032HW front load washer. I found the spyder gear corroded and broken. I also found that the stainless steel drum abraded the front tub cover so bad, it was cracked. My washer is an early model and always had standing water in the door seal after a wash. What I learned is LG stopped making the orginal front tub cover and replaced it with one that had a drain hole at the bottom front edge. I also learned that this new... Read more
Washer won't spin or turns inconsistently? The stator assembly creates the magnetic field that drives the drum. Moderate DIY repair, 30-60 minutes.
The drum was hesitating and then not turning at all with an error code. Wife also smelled "something burning", which of course is never a good sign. Ordered a new stator and had my LG washer back up and running 15 minutes after getting the $100 stator via FedEx. This is the third repair on this machine in 8 years, all parts received from APP!!!! No need to go out and drop $1600 for a new front load LG washer!!! Thanks APP!!!! Read more
This washer tub assembly is the stationary outer tub that surrounds the spin basket and contains the wash water. Replacing a cracked or damaged tub helps stop leaks and restores proper clearance for smooth, quiet washing and spinning.
Replaced the drum Read more
Complete front panel assembly for washer pull-out drawer. Replaces cracked, broken, or missing drawer fronts. Restores clean appearance and handle support.
Ordered a new Drawer Panel Assembly. Unwrapped it and installed it. Read more
Connects water hose to washer nozzle/dispenser assembly. Replace if cracked, worn, or leaking to restore a tight, leak-resistant seal during fill cycles.
Ordered boot, nozzle, and inner spring for boot. Would have ordered outer, but the schematic for parts made it very difficult to navigate to locate parts...24 hr/next day air and I have a happy wife. The only thing that would have made it easier, was having a pair of Spring Expansion pliers, be careful not to pinch inner boot! Used Youtube video as a walk through, completed in the fraction of the time if i hadnt watched! Read more
Replacement knob assembly that restores control and precise selection of settings on your appliance. Fits the original control shaft and provides a secure grip for adjusting temperature, cycle, or power settings. What it does
#1. Watched a You Tube Video #2 Watched it again #3 Followed directions and replaced control knob #4 Did laundry It was very simple, so simple a retired pilot could do it. I recommend watching you tube videos for any undertaking you aren't sure of. Happy Repairing. Read more
This tub-to-pump hose connects the washer's outer tub to the drain pump, carrying water out during the drain cycle. Replace it to resolve leaks or drain errors caused by cracks, splits, or internal blockages.
Based on info around the web and your site I chose to replace all of the bellowed hoses (3) in the machine, as I did not know which bellow was leaking without taking the washer apart first. If one hose was old enough to leak I figured the others were not far behind. The appliance parts pros videos were very helpful, although I chose to replace the drum drain bellows via access through the rear panel thereby saving myself the time of disassembling the front of the machine, as was instructed. In... Read more
Restores interior drum lighting for better visibility when loading and unloading laundry. Replace when light fails or dims to clearly see items in tub.
This is a plastic lifter baffle that mounts inside the dryer drum. It tumbles and lifts clothes as the drum rotates, promoting even airflow and efficient drying. Replace this part if it is cracked, broken, or missing, which can result in clothes bunching together, uneven drying, or loud thumping noises during operation.
Disassembled & found a poorly made spindle (spider) that was broken on each of 3 spokes. Heavy corrosion after 12 years of usage so can't complain. The removal of the spider bolts were difficult due to the seized up bolts causing the nuts in the lifter assemblies to strip & spin inside the plastic housing. Easily removed but now I had to order new lifters delaying the repair. The drum wore a groove inside the tub housing that almost cut it in half. I was able to clean up the grooves & fill by... Read more
Snaps into open holes on washer cabinet to restore finished appearance and keep out dust and lint. Replace missing or damaged caps. Confirm fit with your model number.
Locking pin for shock absorber.
Fix excessive washer vibration and loud spinning with a new balance weight. Stabilizes the tub during spin cycles. Moderate DIY repair for most models.
Secures the door boot to the front panel, creating a watertight seal. Replace if the boot shifts, separates, or leaks during cycles. Verify fit with your model.
Replace fill sensor. Since I was there I also replaced hot & cold water relay/valves since they were the same age. Working fine now. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.