Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Plastic cover that protects the drain pump mechanism from debris. Replace if cracked, broken, or tabs are bent preventing proper seal during drain cycles.
Watched AppliancePartsPros video, disassembled the dishwasher and replace impeller and seals. Read more
Self-tapping screw for appliance assembly and repairs. Secures handles, bins, shelves, and components. Replace missing or stripped screws during moves or repairs.
Went online to repairclinic.com and it was a simple as typing in the serial # to find the correct parts. Shipping was very quick and the handle was completely repaired within days. Read more
Rubber grommet that secures and cushions the evaporator or condenser fan motor in your refrigerator. Replace if cracked, worn, or missing to stop vibration.
Removed refrigerator panel, disconnected light and fan power. Removed fan assembly and replaced motor, grommets and fan attachment spring. Unit had adhesive on spring to help hold the spring. Chatted with customer service and clarified that spring and fan would easily pull off motor shaft. Adhesive probably was extra measure used during original build of the fridge. Noise was due to fan rubbing on housing. New fan position set to avoid any rubbing. Read more
The Refrigerator Fan Blade Spring is designed to maintain the proper tension and alignment of your refrigerator's fan blades, ensuring efficient airflow and optimal cooling performance. This essential component plays a crucial role in the smooth operation of your Samsung refrigerator, preventing noisy vibrations and maintaining consistent temperature control. Made as a genuine OEM part, it guarantees a perfect fit and reliable performance, matching the quality and standards of your original appliance parts. Compatible with a wide range of Samsung refrigerator models, this fan blade spring is easy to install, allowing you to restore your fridge's functionality without hassle. By replacing a worn or damaged spring with this authentic part, you can enhance the longevity and efficiency of your refrigerator, providing a better cooling experience for your food storage needs. Trust in the Refrigerator Fan Blade Spring to deliver the dependable performance your Samsung refrigerator requires.
Fix dishwasher not heating or running for hours. This NTC temperature sensor monitors water temp and prevents overheating. Moderate DIY repair with video.
Ordered new heater/thermostat piece. Read more
Ice dispenser only crushing or not dispensing? This solenoid valve controls ice flow and cube selection. DIY-friendly repair with video guide.
Replaced ice dispenser solenoid Read more
Mounting screw for refrigerator door hinges and internal components. Replace if stripped, missing, or damaged during hinge repair or door removal.
Ordered the pieces from here. Downloaded the user manual. I never work on appliances but I couldn't justify the $200 a service tech would have charged to fix a $35 part. Followed the manual and removed the door. Replaced the broken plastic pieces. BE VERY CAREFUL not to strip the screws. I did and that's another story. Very easy to fix. You will need a second person to help guide the door back onto the frame. Read more
If your refrigerator won't cool or freezes food, the temperature sensor may have failed. This part monitors internal temps to maintain proper cooling.
Replaced the heater sheath and both temperature sensors Read more
Secures the dishwasher sump or sump cover to the tub for a tight, leak-resistant seal. Replace if missing, stripped, or damaged to restore stability.
Refrigerator Fan Blade is a crucial component for ensuring your Samsung refrigerator operates efficiently. This genuine OEM part is designed to maintain optimal airflow within your appliance, promoting consistent cooling and preventing temperature fluctuations. By replacing a worn or damaged fan blade with this high-quality part, you can restore your fridgeGÇÖs performance, keeping your food fresh and extending the lifespan of your refrigerator. The fan blade is crafted with precision to ensure a perfect fit for a variety of Samsung refrigerator models, making installation straightforward and hassle-free. Its durable construction resists wear and tear, providing reliable performance even in demanding environments. Additionally, a properly functioning fan helps reduce energy consumption by allowing your refrigerator to run more smoothly. Whether youGÇÖre experiencing unusual noises, inadequate cooling, or need to replace a broken fan blade, the Refrigerator Fan Blade offers a dependable solution. Trust in this genuine OEM part to deliver the quality and performance you expect from your Samsung appliance, enhancing your overall kitchen experience.
Ordered the two motors plus ordered the fan blades since I was afraid one might break during replacement. Changed out without breaking Freezer and both ice makers now working fine Read more
The Float is an OEM part for Bosch dishwashers. This float senses water levels inside the dishwasher, signaling the inlet valve to refill when needed.
Causes of a float malfunctioning can be mineral deposits accumulating and weighing it down over time, or cracks in the plastic housing allowing water in.
Symptoms of a bad float include:
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
Replaced the defective float switch. Read more
O-ring seal prevents leaks between dishwasher components. Replace when you notice water drips or moisture buildup. Confirm fit with your model number.
WE replaced the drain pump and it still wouldn't drain sometimes. Finally we realized that the drain hose wasn't the correct bosch hose and the rubber was starting to bend and kink where it went through the hole to under the sink.So we bought the drain hose and replaced. Read more
Wax motor for detergent/rinse-aid dispenser.
Took door off, saw that dispenser linkage was ok, I could open and close by hand, so figured the wax motor or the wiring to it were most likely the problem. I took off the wax motor ( actuator) and ran 120 volts to it via jumper wires, and it did not move at all, so figured good chance that was the problem. Found part # on your site, received new one quickly from you, put it in and works great. Thanks. Read more
Fix a dishwasher door that won't close or latch properly. This latch and strike plate assembly restores secure door closure and safe operation.
Replaced check valve, was broken off and plugged the drain Read more
The Refrigerator Evaporator Fan Motor is essential for maintaining optimal cooling performance in your Samsung refrigerator. This genuine OEM part ensures reliable operation by efficiently circulating air throughout the evaporator compartment, keeping your food fresh and beverages chilled. Designed specifically for Samsung refrigerator models, this motor guarantees a perfect fit and seamless integration with your appliance. The Brushless DC motor technology provides quiet and long-lasting performance, reducing energy consumption while enhancing durability. Replacing a faulty evaporator fan motor with the DA31-00020E restores proper airflow, preventing frost build-up and maintaining consistent temperatures inside your fridge. Easy to install, this genuine OEM part allows you to quickly repair your refrigerator without the need for professional assistance. By choosing the Refrigerator Evaporator Fan Motor , you ensure your Samsung refrigerator operates smoothly, delivering the best cooling efficiency and extending the lifespan of your appliance. Trust in this high-quality component to keep your kitchen running efficiently and your food stored under ideal conditions.
This repair was likely compounded by a second failed component after several unplug attempts. The first failure occurred after the freezer door had been left ajar. The freezer temp wouldn't drop but inside it still felt cold. I did several panel resets and the 'unplug for 12 hours' trick, neither changed indications. Checking behind the condenser cover revealed that it was still cold and appeared to be function, but the evap fan did not appear to be working. At some point during one of the... Read more
Rear pump housing for the washer drain/pump assembly. Replaces the worn rear housing that supports the impeller and bearing, helping restore proper draining and reduce leaks or unusual pump noises when the housing fails. What it does:
Our Bosch suddenly quit washing the dishes properly after 15 years of faithful service. I observed that there was no pressure coming from the sprayers, and determined it to be the circulating pump. I could reach into the pump from inside the dishwasher and could feel that something was loose in there - the impeller moved when pumping, but I could stop it with my finger. When I took the pump out and disassembled it, the impeller was in two pieces (the front and back pieces that are supposed... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.