T36bt820ns/69 Parts

This NTC temperature sensor measures appliance temperature and sends resistance-based readings to the control board so the appliance can monitor and regulate heating or cooling for proper operation and cycle control. What it does:

• Detects internal air or component temperature and converts it to a resistance signal for the control board.
• Helps the appliance maintain correct temperatures during heating, cooling, or drying cycles.
• Commonly linked to symptoms like incorrect temperature, extended cycles, or temperature-related error codes.
• Failsafe for sensing — a damaged sensor can cause erratic operation or prevent normal cycle completion.

• Disconnect power before accessing or replacing the sensor to avoid shock or damage.
• Handle the sensor and wiring gently; avoid bending or crushing the sensing tip.
• Verify proper connector seating and routing to prevent pinching; confirm electrical continuity with a multimeter if needed.
• For exact sensor location and replacement procedure.

The Motor-Fan is an OEM component specifically designed for Bosch refrigerators. It circulates air to optimize internal temperatures.

The motor-fan works continuously to push cool air from the freezer compartment and direct airflow throughout refrigerator shelves and bins. Strategically positioned vents help regulate temperature variances. 

Symptoms of a bad motor-fan include:  

• Inconsistent or fluctuating temps from section to section
• Frost or condensation building up unusually fast 
• Abnormal sounds like grinding or squealing during the operation
• Complete lack of airflow

Causes can be a failed motor bearing, compromised fan blades off balance, or blockage preventing free rotation.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore refrigerator models.
 

The Fan Motor is an OEM part for Bosch refrigerators. It is responsible for circulating cold air throughout the freezer compartment to keep your freezer contents frozen.  

A bad fan motor can occur due to normal wear and tear, electrical malfunctions, or damage from frost buildup or debris. Signs of a faulty fan motor include reduced cooling performance, unusual noises coming from the freezer, or the presence of frost or ice buildup.

Symptoms of a bad fan motor include:

• Insufficient cooling in the freezer  
• Unusual noises 
• Excessive frost or ice buildup  

Replace your faulty fan motor with this genuine OEM Bosch part to restore your refrigerator. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

This foot installs at the appliance base to support and level the unit. Replacing a worn or missing foot restores stability, reduces vibration and rattling, and makes accurate leveling easier.

• Provides a stable contact point between the appliance and the floor
• Allows height adjustment during leveling
• A damaged or missing foot can cause wobbling, uneven operation, vibration, or noise
• Common signs include cracking, deformation, or a loose/stripped attachment

• Disconnect power and shut off any utilities before servicing
• Carefully tip or raise the appliance to access the base; use a helper and proper supports
• Install the new foot and adjust height to level the unit
• Verify stability front-to-back and side-to-side after re-leveling

This heating element is the dishwasher heater assembly that warms wash water and helps the dry cycle perform properly. Replacing a failed heater restores water temperature control and improves cleaning and drying results. What it does:

• Heats wash water so detergents and sanitizing cycles work effectively
• Supports the dryer/tub warming stage to reduce residual moisture on dishes
• Common symptoms: dishwasher doesn't heat, dishes remain cold or wet, or cycles take longer than normal
• Works as the OEM heater assembly designed for compatible Bosch dishwashers

• Disconnect power (and water, if applicable) before servicing to avoid shock or injury
• Access typically requires removing the lower access panel or dishwasher base; follow OEM service instructions
• Inspect mounting hardware and seals; replace any damaged clips or gaskets to prevent leaks

This replacement fixture is the factory mounting housing that secures its paired component inside your appliance. Replacing a damaged or missing fixture restores proper support and alignment for reliable, rattle-free operation.

• Provides the mounting structure to hold the associated part in the correct position
• Helps protect connections from strain and vibration
• Common signs it's needed: cracked or broken housing, loose fit, rattling, or the attached part won't stay in place/intermittently works
• Direct-fit replacement built to match the original form and connection points

• Disconnect power to the appliance before service; shut off gas or water if applicable
• Access location varies by model; refer to your service manual and document wire routing/fastener locations
• Transfer any screws, clips, seals, or wiring from the original if they are reused
• Do not overtighten fasteners into plastic; check for a secure, even fit before reassembly

Replacement retaining pin that secures appliance components so panels, hinges or linkages stay connected. Use this direct-fit hardware to restore proper alignment and reduce looseness, rattling or separation caused by a missing, bent or worn pin.

• Secures mating parts like hinges, levers or shafts to prevent separation and play
• Common symptom: loose or rattling door/panel or misaligned assembly where the original pin is missing or damaged
• Typical use: keeps pivot points and small assemblies aligned for proper operation
• Metal fastener designed for a simple, local replacement

• Disconnect power (and water, if appliance type requires) before servicing
• Remove any obstructions and note original orientation before removing the old pin
• Use appropriate hand tools; do not force parts—if fit is tight, inspect mating components for damage

The Relay-Starting is an OEM part for Bosch refrigerators. It is responsible for controlling the start signal to initiate proper refrigeration.

The relay-starting facilitates smooth and reliable cooling performance by properly communicating the start command to the compressor. This allows the refrigeration system to kick on as needed to maintain the set interior temperature.

Causes of a faulty relay-starting include normal wear over time or failures in the electronic components themselves.

Symptoms of a bad relay-starting include:

• The refrigerator failing to cool properly
• Fluctuations in interior temperatures
• Strange humming or buzzing sounds from inside the appliance
• The cooling system not activating as expected

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This gutter heating heating element helps prevent ice dams and keeps gutters and downspouts clear so melting water can drain away. It's a direct-replacement service part used in compatible Bosch systems to reduce ice buildup. What it does

• Provides localized heat to gutters and downspouts to help melt snow and ice
• Helps reduce ice dam formation that can cause overflow or water backup
• Restores proper drainage when frozen buildup is the cause of gutter blockage
• Commonly used when you see visible ice on gutters, water backing up, or slow roof drainage

• One gutter heating element assembly

• Intended for installation by an experienced DIYer familiar with appliance electrical work
• Disconnect power to the appliance and associated circuits before servicing
• Follow OEM wiring and mounting instructions; use appropriate outdoor-rated wiring and fasteners
• Inspect connections and weather seals after installation and test operation before finalizing

This OEM-style fixture is the replacement mounting piece that secures internal components and helps keep panels, racks or assemblies aligned for reliable operation. Replacing a broken or worn fixture restores proper fit and reduces rattling or movement. What it does

• Provides a secure mounting point for an internal panel, trim piece, or appliance assembly
• Keeps connected parts aligned to prevent binding, gaps, or misfit
• Helps stop vibration-related noise caused by loose or damaged mounting points
• Commonly replaced when the original shows cracks, breaks, or excessive wear

• Disconnect power and water before beginning service
• Handle sharp edges and plastic tabs carefully to avoid damage or injury
• Basic hand tools are usually required; consult your model's parts diagram for exact placement

This is a mounting fixing kit used to secure specific dishwasher components. It replaces worn or missing hardware so parts stay firmly in place and the appliance operates as intended.

• Secures designated parts to prevent loosening, rattling, or misalignment
• Helps resolve issues like loose panels or components shifting during cycles
• Useful when original fasteners are stripped, corroded, or lost
• Restores proper fitment after service or replacement of related parts

• Disconnect power and turn off water before servicing
• Keep track of original hardware locations for correct reassembly
• Hand-start screws to avoid cross-threading; tighten to snug, do not overtighten
• Address corrosion or damage present on mating parts before installation

The Spindle is an OEM replacement part for Bosch refrigerators. It rotates shelf tracks, glide systems, and adjustable organizers for customizable storage throughout the interior. Smooth spinning allows for simple organizational changes as needs evolve.  

Symptoms of a bad spindle typically include jamming, binding, or grinding noises heard while maneuvering shelves and accessories. Mineral buildup from water deposits poses risks to spindle function over time. 

Causes of a bad spindle include:

• Spindles are difficult or impossible to turn freely  
• Jammed accessories that spin but do not change position
• Corrosion visible on components from water damage
• Mounting brackets or bushings stripped or degraded

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This condenser fan circulates air across the condenser coil to help remove heat from the refrigerator, improving cooling efficiency and preventing compressor overheating. It replaces a worn or damaged condenser blower assembly. What it does:

• Moves air over the condenser coil to dissipate heat from the refrigeration system
• Restores proper condenser airflow when the original fan is seized, noisy, or not spinning
• Helps prevent excessive compressor run time and warm cabinet temperatures caused by poor condenser cooling
• Rubber mounts reduce vibration and noise transfer to the cabinet

• One condenser fan assembly with rubber mounting grommets

• Disconnect power to the appliance before starting and follow all safety precautions
• Access often requires removing the rear lower service panel or toe-kick; keep track of fasteners
• Handle the fan blade and motor carefully to avoid bending blades or damaging the shaft
• After installation, verify unobstructed blade rotation and test the unit for normal operation

The Water Valve is an OEM part for Bosch refrigerators. It regulates the flow of water into the ice maker and water dispenser.

The water valve allows water to fill the ice maker bucket or flow through the dispenser chute on demand. It controls water pressure and assists in proper ice formation.
Over time, mineral buildup can affect a water valve's ability to open and close smoothly. 

Symptoms of a bad water valve include:

• Slow or inadequate water flow from the dispenser
• Ice maker not filling or producing ice fully
• Water leaking inside refrigerator compartments
• No water dispensing when button is pressed

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This dividing wall is an interior cabinet divider that restores proper separation between compartments and helps keep contents organized. It replaces a damaged or missing divider to improve fit and function inside the appliance. What it does:

• Provides a stable partition between sections of the appliance interior to prevent items from shifting
• Helps maintain proper spacing for shelves, drawers, or components that mount around the divider
• Restores original cabinet alignment and appearance when the original piece is cracked or worn
• Can reduce rubbing or contact between adjacent parts that may cause noise or wear

• One dividing wall

• Disconnect power (and water if applicable) before starting work and follow all safety precautions
• Often installs from inside the cabinet; you may need to remove shelves, drawers, or trim panels for access
• Handle carefully to avoid scratching interior surfaces and to prevent breakage of tabs or clips
• Reinstall removed components and proper fit and alignment before returning the appliance to service

This door hinge secures and guides an appliance door, restoring stable, smooth opening and closing. Use it to replace a broken, bent, or worn hinge so the door hangs correctly and seals as intended. What it does:

• Provides a pivot point so the door opens and closes smoothly
• Restores proper door alignment and prevents sagging or dragging
• Helps the door form a proper seal to maintain temperature and function
• Fits the factory mounting locations for a direct replacement

• One door hinge

• Disconnect power and empty the door before starting; support the door while removing mounting screws
• Use appropriate hand tools and keep fasteners for reuse unless new hardware is provided
• Tighten screws securely but avoid over-torquing to prevent damage