Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Plastic cover that sits above the crisper drawer in your refrigerator. Replace if cracked, broken, or missing to restore support and appearance.
I ordered two new vegetable bin tops for a twenty year old refrigerator. They arrived in two days and problem solved. Read more
Rubber grommet that mounts and cushions the compressor on your refrigerator or freezer. Replace if cracked, worn, or causing vibration noise from unit.
Installed new stainless steel pan replacing broken original plastic pan and installed new rubber grommets for the compressor Read more
Fix a noisy or slow-running condenser fan with this motor. Common repair when your refrigerator runs warm or fan makes grinding sounds. DIY-friendly.
I removed the lower back panel,I disconnected the two wire plug and removed three mounting screws and removed the motor.Then I removed the threaded fan nut and installed the fan on the new motor.Installed the three mounting screw to the bracket and reinstalled the plug.Replaced the lower panel,runs like new Read more
Refrigerator won't cool and compressor just clicks or hums? The start relay helps the compressor motor start. Moderate DIY repair, clean coils first.
I researched the problem and determined that the only thing that can cause this was compressor bad or not starting. Since it was cold the day before I felt it had to be the starter parts and ordered them. It was also very important to clean the coil which I believe caused the over heating. Read more
Freezer not cooling evenly or warm spots in fridge? A cracked evaporator fan blade stops airflow across coils. Simple DIY fix restores proper cooling.
Secures water and drain tubing to prevent leaks, noise, and vibration. Replace if loose, cracked, or missing. Confirm fit with your model number.
Replaced original (18 yrs.) 1/4" plastic tubing, clamp and grommet (AppliancePartsPros/GE parts) from outlet of ice maker water control valve to ice maker inlet. Also replaced water supply line to inlet of water control valve with new, GE braided, PEX 1/4" supply line with pre-attached female compression fittings on both ends. Repair job with AppliancePartsPros parts from outlet of water control valve went perfectly well, was simple, and had no leaks when tested. Parts were easy to install,... Read more
Small cabinet roller that allows your freezer to glide smoothly for cleaning or service. Replace worn, cracked, or missing wheels to restore movement.
I cleaned the coils as best as I could with a special brush and replaced the seized up fan motor. Read more
Reversible plug door that covers the power inlet on the back panel. Replace if cracked, broken, or missing to restore a clean appearance and protect the connection.
Secures refrigerator wiring to prevent chafing and vibration noise. Replace when damaged or missing to keep harnesses organized. Confirm fit by model.
Vinyl sleeve that fits over rods, tubes, or wires in your refrigerator. Replace if cracked, torn, or missing to protect contact points and reduce wear.
Looked up on the internet how to replace the thermostat. I ordered a thermostat received it very fast and installed it in about 1/2 hour. works great. Read more
Replace missing or stripped dishwasher mounting screws. Secures internal components and panels. Essential hardware for reassembly after repairs.
Ordered the necessary parts to fix it Read more
Fix a compressor that won't start, hums, or cycles on and off every few minutes. This motor start capacitor restores reliable compressor operation.
Mounting screw secures door handles to refrigerator doors. Replace if missing, stripped, or broken. Requires allen wrench for installation. Essential hardware.
Online with appliance parts .com Was able to attain pqrts necessary to fix Read more
Replacement mounting screw for refrigerators. Secures brackets, panels, handles, and covers. Replace lost, stripped, or damaged screws to restore stability.
I retrofitted the unit to the 9.5" since the 17.5" is discontinued due to faulty design. I used parts AP4484272, AP4484324, AP4484499, 6 of AP4380294, AP3993470. It was simple. It looks incredible! Works Perfect! -Tommy Lentsch www.TommyLentsch.com Read more
Secures water tubing or wiring to your refrigerator cabinet. Replace if missing or damaged to prevent vibration, rubbing, or leaks. Confirm fit.
Bough ice maker Read more
Set of 12 size 8-18 mounting screws for dishwashers. Replaces lost, stripped, or missing screws for secure installation of handles and components.
Ordered the cord through appliance parts pros, with additional screws and it works! Yay after waiting months and everywhere was out. Thank you. Read more