Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Color: Black.
The ice dispenser door was not closing tightly. As a result, there was frost build up in the ice chute, which also was allowing ambient air and temperature into the freezer compartment. Upon further inspection, there was black “schmutz” on the ice door, and the rubber ice funnel and deflector parts were deteriorating. Because the door was not closing tightly, I also assumed that the door-closing spring was week. The parts I ordered were: ice door assembly, ice funnel, ice deflector, spring and... Read more
Replace the auger. GE makes this as hard as possible. You have to disassemble almost all of the ice tray mechanism to get the auger out. One tip is that you can unscrew the plastic nut holding the auger in place using a putty knife without having to remove the C-clip holding the plastic nut itself in place. But you still have to disassemble almost the whole thing. You may prefer to remove the C-clip, since reassembling the whole ice crusher "stack" without removing the C-clip can be time... Read more
Replaced drain trough under evaporator Read more
Left hand side. For right hand use WR17X2769. For center use WR17X2768
Having my model number, it was very easy to find the part I needed. Ordered it. Removed glass, and two screws, to take the whole lowest shelf assembly off. Replaced the broken bracket. Reinstalled. I saw my old one had some foam rubber adhered to it and the new one did not have any. Does not seem to be a problem. Read more
Color: Black. Other colors: For white use WR17X4153, for almond use WR17X4151.
Color: white. It measures about 7 inches wide by 3 inches deep.
Replaced both the inlet water valve and the water dispenser valve. Replaced water dispenser switch and water filter. Read more
Just inserted the bucket. Read more
Includes 12 clips.
I removed ice maker, cleared out frozen food to make room for drill, removed broken support, & drilled out old pop rivet (covering the area below with a cloth to catch the metal shavings). Then I carefully straightened the metal support, loosely installed the new support, and pop-riveted it onto the support using the same size rivet. I reinstalled the ice maker, replaced the frozen food, and turned the ice maker back on. No issues. Read more
I welded the auger first but it didnt seem to last. i then took the whole thing apart and found more worn parts so i ordered all of the parts i needed and replaced them. it now works like new. Read more
Purchased new slides and screws and replaced them both. Read more