Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Usually ships within 4 - 14 days
The Evaporator Fan Motor Kit is an OEM part compatible with GE refrigerators. It is a critical component responsible for circulating air and maintaining proper airflow within the refrigerator's evaporator system, ensuring efficient cooling and temperature regulation. It features a shaft that measures 3/8 of an inch and two right-side terminals. Notably, the motor no longer comes with harness wires, which must be obtained separately for installation.
Symptoms of a faulty evaporator fan motor include:
Causes of a bad evaporator fan motor can include wear and tear over time, electrical issues or short circuits, or physical damage from foreign objects or improper maintenance.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.
I called AppliancePartsPros.com and they helped me diagnose the problem for this very nice, and well designed refrigerator, that I wanted to keep rather than recycle at the local scrap yard. It turns out that all it needed was a small electric fan (i.e., evaporator fan) to circulate the air from the freezer coils throughout the refrigerator [all other major components were good]. It was really easy to locate the motor and fan and replace it. I saved hundreds of $$$. I really appreciated the... Read more
The Fan Blade Grommet is an OEM replacement part for GE brand refrigerators. Located behind the evaporator fan blade where its central shaft passes through, this rubber sealing piece creates a protective barrier isolating the fan assembly.
Causes of a potentially problematic fan blade grommet include cracks or deterioration that develop from continuous vibration and impacts over extended use. Exposure to temperature fluctuations can also cause the rubber to harden and lose elasticity.
Symptoms of a faulty fan blade grommet include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore model refrigerators.
Replaced the evaporator fan motor, fan blade, and two rubber grommets. I was careful to mark screws and bolts with sticky notes to ensure getting them back in the right place. I had all the new parts ready before I started the job because I did not have an extra freezer for my food and I wanted to do this quickly and only once. New parts went in well, Took a while to install the ring for the new fan blade using my long nose pliers. I would have saved time if I had the special ring spreader... Read more
Links the dispenser solenoid to the ice chute door in your refrigerator. Replace if the crank is broken, cracked, or worn, preventing proper closure.
REPLACED DISPENSER CRANK ARM, SPRING, FLAPPER FOR DISPENSER. THE REPAIR WAS VERY SIMPLE WITH NO PROBLEMS AT ALL. Read more
Includes 2 door handles.
The white had worn off the refrigerator and freezer door handles exposing the dingy yellow underneath. Because it was a soft vinyl material, I didn't think paint would work. The replacement parts arrived two days after ordering. Accessing the door handle screws involved removing two pieces of trim by wedging a narrow bladed screwdriver into the top joint between the white trim and the chrome channel and gently prying the trim outward and down toward me until it popped out of the channel. I ran... Read more
The Drive Cup is an OEM part for GE refrigerators. This part engages with other parts to drive the ice out of the molds and into the storage bin.
Causes of Drive Cup failure can range from physical wear and tear from regular use, which may lead to cracks or deformities in the part, to accumulation of frost or ice that hinders its movement.
Symptoms of a malfunctioning Drive Cup include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Ordered new auger and installed it and now we have clean ice for our drinks. Read more
The Ice Door Spring is an OEM part compatible with GE refrigerators. It is responsible for providing tension and support to the ice chute door, allowing it to open and close smoothly. When you activate the ice dispenser, the spring helps to release the door and allow the ice to pass through. After dispensing, the spring assists in closing the door to prevent cold air leakage and maintain the desired temperature inside the refrigerator.
You should replace the ice door spring if it loses tension or breaks, which can happen due to regular wear and tear, frequent use, or accidental damage. A faulty spring can lead to issues with the ice dispenser's operation and overall efficiency.
Symptoms of a bad ice door spring may include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
The ice dispenser door was not closing tightly. As a result, there was frost build up in the ice chute, which also was allowing ambient air and temperature into the freezer compartment. Upon further inspection, there was black “schmutz” on the ice door, and the rubber ice funnel and deflector parts were deteriorating. Because the door was not closing tightly, I also assumed that the door-closing spring was week. The parts I ordered were: ice door assembly, ice funnel, ice deflector, spring and... Read more
Color: Black.
Changed the washer behind fan blade and it quieted right down. Read more
I removed the drawers and old rails, and screwed in the new ones. It was very straightforward. Read more
This replacement part is an ice dispenser deflector, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. Ice dispenser deflectors are found inside of the ice-making assembly and are an important part of many freezers. The ice dispenser deflector allows the ice to come down from the tray into the dispensing area. A new ice dispenser deflector might be needed if the current one has become too brittle and has even cracked or broken. Be sure that the refrigerator is completely powered off before starting this repair. The user must have access to the ice maker assembly and will need common household tools like a screwdriver and pliers. The user might also need working gloves as some parts in and around the assembly have sharp edges or blades.Note that this part is sold individually. This ice dispenser deflector is sourced directly from the manufacturer and is a genuine OEM replacement part.
Replaced the deflector Read more
Color: clear. It's 7 watts 130 volts.
After replacing the bulb several times, I ordered and replaced the socket. Easy install and no more light bulbs blowing. The instruction video help immensely. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.