Uxts 5530Aas-Ss Parts

The Screw is an OEM part for Whirlpool appliances. This specific screw is used in various locations within Whirlpool appliances, securing components and ensuring the stability and proper alignment of parts. It is designed to fit precisely and maintain a firm hold, contributing to the overall functionality and safety of the appliance.

Over time, screws can become worn or stripped due to regular use, corrosion, or over-tightening. 

Causes of a bad screw include wear and tear, exposure to moisture leading to rust, and over-tightening which can strip the threads.

Symptoms of a bad screw include:

• Loose or wobbly components
• Misalignment of parts
• Noise due to vibrating or loose parts
• Difficulty in securing or removing the screw

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Keep your vent hood performing at its best. This 3-pack of recirculation filters refreshes the air in non-ducted installations by capturing fine cooking byproducts, helping the hood clear steam and smoke and reduce lingering kitchen odors.

• Filters air when the hood is set up for non-ducted/recirculating operation
• Helps capture fine particles from cooking to reduce haze and odors
• Replace if saturated, warped, damaged, or excessively discolored
• Common symptoms of a spent filter set: lingering odors after cooking, smoke not clearing as well, visible buildup on filters

• Disconnect power to the hood and allow components to cool before servicing
• Access filter area (location and retention method vary by model); note orientation of existing filters
• Release tabs/latches, remove old filters, and seat the new filters securely in the same orientation
• Refer to your model's use & care guide for specific replacement guidance and intervals

This rocker switch controls the exhaust function on the appliance's ventilation system. It restores reliable on/off control of the blower when the original switch becomes worn, sticks, or fails. What it does:

• Provides on/off control for the exhaust/blower circuit
• Replaces a faulty or intermittent rocker that prevents the vent from operating correctly
• Helps address symptoms such as blower won't start, won't shut off, or only works when the switch is jiggled
• Restores proper tactile feel if the old switch is loose, cracked, or stuck

• 1 rocker switch

• Disconnect power at the breaker before servicing
• Access the control panel and note wire positions or take a clear photo
• Transfer wires one at a time to the new switch; ensure terminals are fully seated—do not pull on the wires
• Reassemble panels, restore power, and test exhaust operation

This charcoal filter fits an over-the-range microwave hood and absorbs cooking odors when the unit is set to recirculate indoors. Replacing a saturated filter restores effective odor control and helps keep vent airflow unobstructed.

• Absorbs smoke and odors in non-vented/recirculating installations
• Helps maintain proper vent airflow and fan performance
• Common signs it's due: lingering odors, weak vent suction, dark/discolored filter media, or a damaged/crumbly filter
• Restores intended odor-reduction performance after the original filter is saturated

• Disconnect power to the microwave before servicing
• Remove the upper grille/access panel to access the charcoal filter compartment
• Slide out the old filter; install the new one in the same orientation and seat fully
• Reinstall the grille, restore power, and test the vent fan

This charcoal filter is used in recirculating range hoods to reduce cooking odors and smoke. Replacing a saturated filter restores ventilation performance and helps keep kitchen air fresher when venting air back into the room. What it does:

• Adsorbs cooking odors and vapors when the hood is set to recirculate indoors
• Helps maintain proper airflow and capture smoke/steam during cooking
• Replace if saturated, damaged, or shedding carbon
• Common signs: lingering odors, reduced airflow, discoloration, or loose carbon granules

• 1 charcoal filter

• Disconnect power to the hood before servicing
• Remove/open the filter cover or grille; release the old filter from its clips or frame
• Insert the new filter with proper orientation; secure it and reinstall the cover
• Charcoal filters are not washable or reusable; replace periodically as needed

The Light Cover is an OEM part for Whirlpool range hoods. The light cover protects the internal light bulbs while allowing brightness to illuminate the cooktop below. It helps prevent grease, smoke, and kitchen pollutants from damaging electrical components.

Causes of a bad light cover can include damage from heat and grease in the range hood environment over extended use. Material breakdown from cleaning chemicals is also common.

Symptoms of a bad light cover include:

• Dim or uneven hood lighting that does not adequately illuminate the cooking surface
• Discoloration or stains on the light cover material
• Cracks or breaks that expose light bulbs
• Premature bulb burnout from lack of protection

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This light lens covers and protects the appliance light bulb, diffusing illumination while shielding the bulb and socket from grease, moisture, and impact. Replacing a cracked or missing lens restores safe, even lighting and a clean, factory look.

• Covers the light opening and diffuses light for even illumination
• Protects the bulb and socket from grease, steam, and debris
• Replace if the lens is cracked, warped/yellowed, missing, or won't stay secured
• Common symptoms: exposed bulb, harsh/uneven lighting, lens falling out, heat damage
• Also referred to as a light cover or lens cover

• Disconnect power to the appliance before servicing; allow the lamp area to cool
• Remove any retaining screw(s) or release tabs to take out the old lens
• Clean the mounting area; align and fully seat the new lens
• If screws are used, do not overtighten; restore power and test light operation

This fan motor powers the appliance's fan blade to move air for cooling and circulation. Replacing a worn, seized, or noisy motor restores proper airflow so the unit maintains temperature and protects internal components from overheating.

• Drives the fan blade to circulate air for cooling or ventilation inside the appliance
• Helps regulate temperature and prevent hot spots or overheating
• Common symptoms: fan won't run or starts then stops, loud humming/squealing, rattling, weak airflow, overheating or safety shutdowns
• May contribute to temperature fluctuations or extended run times

• Disconnect electrical power to the appliance; if applicable, shut off gas supply
• Allow the unit to cool; wear cut-resistant gloves and eye protection; beware of sharp metal edges
• Note wire positions; transfer the fan blade and any spacers/grommets as needed; confirm rotation direction and free blade clearance
• After reassembly, restore power and test for smooth operation and proper airflow

This hood damper is the backdraft flap in the exhaust outlet. It opens when the blower runs to vent air outside and closes when off to help block outside drafts, odors, and pests from entering.

• Controls airflow from the blower to the duct during ventilation
• Closes when off to reduce backdrafts and outside air intrusion
• Helps maintain effective capture of smoke, steam, and odors
• Typical symptoms: drafts through the vent, flapping/rattling noises, poor venting, or a broken/missing flap

• Disconnect power; if vented, support or disconnect ducting as needed
• Access the exhaust outlet and remove the damaged damper
• Install with arrow/hinge oriented for airflow; the flap moves freely without binding
• Reassemble ductwork, restore power, and test the fan on all speeds

A replacement mounting plate that secures internal components and restores proper alignment in compatible Whirlpool appliances. Helps stop rattling and loose parts so the appliance runs more quietly and reliably. What it does:

• Secures and supports internal assemblies to maintain correct positioning
• Prevents vibration and rattling caused by a damaged or bent plate
• Helps maintain proper clearance so moving parts operate without interference
• Restores stable fit when the original plate is cracked, warped, or corroded

• Disconnect power (unplug or shut off breaker) before starting any repair
• Remove the appropriate access panel or trim to reach the plate; keep track of fasteners
• Use basic hand tools; avoid over-tightening screws to prevent distortion

This is a filter latch that secures the refrigerator water/air filter housing so the filter stays seated and the housing seals correctly. Replaces a worn or broken latch to restore proper filter retention. What it does:

• Holds the filter housing cover or cartridge firmly in place to prevent dislodging
• Helps maintain a proper seal to reduce leaks or bypass around the filter
• Stops the filter from falling out when removing or replacing the cartridge
• Resolves symptoms like a loose or broken latch, filter not staying seated, or water bypass near the filter area

• Disconnect power and shut off water supply before servicing the filter area
• Remove the old latch per your model's service instructions; small hand tools may be needed
• Inspect surrounding housing for damage; replace housing if cracked or warped
• Do not force or overtighten; seat the latch so the filter seals correctly

This rocker switch replaces a worn or failed control actuator to restore reliable on/off operation for your appliance's control panel. Durable, service-grade part designed to match the original fit and function. What it does:

• Acts as the user control for powering or selecting functions on the appliance control panel
• Restores a firm, responsive on/off or selection action when the original switch is loose, stuck, or non-responsive
• Commonly used when the appliance does not power on, has intermittent control response, or buttons feel soft or unresponsive

• One replacement rocker switch

• Disconnect power (unplug or shut off circuit breaker) before attempting any repair
• Access the switch through the control panel per your model's service instructions; handle wiring and connectors carefully
• Verify switch operation before reassembling the panel

This genuine refrigerator water filter reduces common contaminants to help deliver cleaner-tasting, clearer drinking water from your fridge's dispenser and icemaker. Easy to swap so your refrigerator keeps providing fresh water. What it does:

• Filters sediment and particles that cause cloudy water
• Helps reduce tastes and odors from the water supply
• Supports clearer ice and better-tasting beverages
• Can improve dispenser flow when used as directed

• Turn off or stop water dispenser per your refrigerator's instructions before removing the old filter.
• Twist or push to remove old filter and insert the new filter until it seats; follow OEM seating method for your model.
• Flush water through the dispenser until it runs clear to remove trapped air and loose carbon fines.
• Replace according to the refrigerator manufacturer's recommended interval and dispose of the used filter per local regulations.

Color: Black

Color: White