W10837808 Parts

This 8-32 x 5/8 screw replaces missing or damaged hardware specified by the manufacturer to secure panels, brackets, and internal components in your appliance. Restores a tight, rattle-free fit to help prevent vibration and misalignment.

• Provides the correct 8-32 thread and 5/8-inch length where specified
• Secures sheet-metal panels, brackets, and internal assemblies
• Replaces missing, stripped, or corroded screws
• Symptoms include loose or rattling panels, misaligned parts, or hardware that won't stay tight

• Disconnect power; shut off gas before servicing
• Support panels/components while removing or installing hardware
• Start threads by hand to avoid cross-threading; tighten only until snug
• Match the original screw's location and orientation for proper fit

This factory replacement screw fastens appliance components securely. Use it to replace lost, stripped, or corroded hardware and restore a snug, rattle-free fit and proper alignment of panels and assemblies.

• Secures panels, brackets, and internal components to their mounting points
• Replaces missing or damaged fasteners to maintain correct alignment
• Helps eliminate vibration and rattling caused by loose hardware
• Restores the original fit with OEM-matched threads and dimensions

• Disconnect power and shut off water or gas supplies before servicing
• Use the correct driver bit that matches the screw head to avoid stripping
• Replace one fastener at a time to keep parts aligned
• Tighten snugly; do not overtighten to prevent stripped threads or cracked plastic

This O-Ring is a small sealing gasket used in your appliance to create a secure, leak-resistant joint between mating parts. Replacing a worn ring restores proper sealing performance to help prevent drips, seepage, and premature wear. What it does:

• Forms a tight seal between mating components to contain fluids and protect internal parts
• Helps maintain proper system pressure and flow where used
• Reduces leaks at fittings, housings, or shafts
• Typical failure signs: visible seepage, persistent drips, or a flattened/cracked ring

• Includes one O-ring

• Disconnect power and shut off any supply lines before servicing
• Remove the old ring carefully; clean the groove and mating surfaces
• Apply a light silicone-based lubricant to the new ring
• Seat evenly without twisting; reassemble and tighten fittings without overtightening

This replacement cap is a small protective cover designed to protect exposed openings and components from dirt, debris and moisture, helping maintain proper appliance performance and reduce wear. What it does:

• Covers and protects exposed shafts, fittings or openings to keep contaminants out
• Helps maintain seals and prevents debris buildup that can cause noise or premature wear
• Restores the part's finished appearance when the original cap is cracked, broken or missing
• Serves as a simple, low-cost repair to avoid secondary damage to adjacent components

• Disconnect power and water supplies before attempting any repair
• Typically presses or snaps into place; inspect mating surface for damage or buildup before installing
• Use appropriate safety gear and avoid forcing the cap onto a damaged part

This replacement jar restores a damaged or missing blender container so you can safely blend ingredients and transfer them without leaks or contamination. It fits the original coupling and seals when seated properly. What it does

• Holds ingredients for blending, mixing, and pureeing.
• Replaces jars that are cracked, chipped, leaking, or otherwise damaged.
• Restores a proper seal with the blender base to prevent leaks during use.
• Lets you resume normal blending performance when the jar is the worn or failed component.

• Ensure the blender is unplugged and the drive coupling is clean before installing the jar.
• Seat the jar fully on the base and the coupling engages smoothly.
• Inspect the jar and any gaskets or seals for damage; replace seals if explicitly required.
• Follow the appliance manufacturer's cleaning and care instructions for this part.

A small replacement nut used to secure components on compatible Whirlpool appliances. Replacing a worn or missing nut restores proper fastening so panels, brackets, or assemblies stay firmly in place. What it does

• Secures mounting bolts, studs, or threaded components to prevent movement
• Stops panels, trim, or brackets from vibrating or coming loose
• Helps maintain alignment of parts that rely on a threaded connection
• Can correct symptoms like rattling, loose trim, or shifting assemblies

• Disconnect power to the appliance before servicing to avoid electrical hazards
• Use the correct size socket or wrench to avoid rounding the nut
• Hand-start threads to avoid cross-threading, then tighten to a snug fit
• If the original nut shows damage or thread wear, replace it with an exact match

This drive motor assembly powers the washer's agitation and spin functions to restore normal tub movement and drainage. Replaces a worn or failed motor to help your machine resume proper wash and spin cycles. What it does:

• Rotates the transmission/drum to enable agitation and spin cycles
• Provides torque for draining and high-speed spin to remove water from loads
• Commonly needed when the washer won't agitate, won't spin, or makes grinding/noise from the motor area
• Matches OEM fit and mounting points for a direct replacement when the listed part number is specified

• Disconnect power and water before beginning any repair
• Handle the motor carefully; support the tub/transmission as required to avoid strain
• May require basic hand tools and lifting assistance; refer to the service manual for vehicle-specific steps

This replacement glass blender jar restores a cracked, chipped or leaking pitcher so you can safely blend smoothies, sauces and more. It fits into the blender base and secures to the blade assembly for normal blending use. What it does:

• Replaces a cracked, chipped or otherwise damaged blender jar that leaks or can't hold ingredients
• Provides a durable container for blending, pureeing and mixing
• Helps restore a proper seal with the blade assembly so food and liquids stay contained
• Reduces risk of glass contamination from cracks that can trap food

• Unplug the blender before removing or installing the jar and blade assembly
• Handle glass carefully to avoid chipping or breakage during install
• Inspect and, if needed, replace the blade assembly and gasket to ensure a proper seal

This is a small hex nut used to fasten and secure appliance components. It provides a reliable threaded connection to keep panels, brackets, or assemblies held in place for safe operation. What it does:

• Threads onto a mating bolt or stud to hold parts together
• Prevents components from loosening or separating during use
• Helps stop rattling, misalignment, or intermittent contact caused by loose hardware
• Used wherever a compact, standard nut is required for fastening

• Disconnect power to the appliance before servicing to avoid shock or injury
• Use the correct wrench or socket size for a snug fit; avoid overtightening
• Inspect mating threads and replace the nut if threads are damaged or corroded