Was24460ucaxxis Parts

This genuine replacement motor powers the washer drum, restoring agitation and spin for proper cleaning and draining. Designed to match the original fit and function so your machine can move and drain laundry reliably. What it does

• Turns the drum and drive system so the washer can agitate and spin
• Restores normal spinning and draining when a failed motor prevents drum movement
• Stops abnormal humming or no-start conditions caused by a worn motor
• Works with the washer's transmission and control system to deliver correct wash cycles

• One washing machine motor

• Disconnect power and water before beginning any repair
• Verify electric connections and mounting orientation before final reassembly
• Motor may be heavy or awkward — support the drum/transmission during removal

This front drum motor mounting bushing supports the dryer drum shaft and helps the drum spin smoothly for quiet, even drying. It replaces a worn bearing surface to reduce noise and prevent drum misalignment. What it does:

• Provides a low-friction bearing surface for the drum shaft at the front motor mount
• Helps keep the drum properly aligned during rotation
• Reduces squealing, grinding, or rubbing noises caused by a worn front bushing
• Prevents excess wear on the drum shaft and adjacent components when functioning correctly

• One front drum motor mounting bushing

• Disconnect power before beginning any repair and follow all safety precautions
• Inspect the drum shaft, drum seal, and rear bushing for wear and replace as needed
• Use appropriate tools to remove the old bushing and press or seat the new bushing evenly
• Re-check installation and related components if alignment or noise persists after replacement

2 included - Front load

This holder is a replacement mounting bracket that secures a small internal component in place to restore proper alignment and support. It helps keep parts stable so the appliance operates as intended. What it does

• Secures and supports an internal component to prevent movement or misalignment
• Replaces cracked, broken, or worn mounting points that allow rattling or improper part position
• Restores stable contact where a loose component causes intermittent operation or noise
• Fits a specific OEM location; use the part number to confirm exact application

• One replacement holder/mounting bracket

• Disconnect power and water before starting any repairs
• Inspect surrounding clips or fasteners and reuse or replace as needed—this part typically snaps or screws into place
• Handle plastic mounting parts gently to avoid cracking during installation

This interference capacitor reduces electrical noise and helps protect the appliance's control circuitry from voltage spikes. It's a direct-replacement noise suppressor used where EMI/RFI filtering is required for reliable operation. What it does:

• Suppresses electromagnetic and radio-frequency interference that can affect controls and electronics
• Helps prevent false signals or erratic behavior caused by electrical noise
• Supports stable operation of motors and electronic control boards
• Can reduce audible electrical noise or interference-related symptoms

• Disconnect power at the breaker before inspecting or replacing the capacitor
• Discharge the capacitor and avoid touching terminals; use insulated tools
• Verify wiring match and polarity before connecting

Replacement holder that secures internal components and accessories, restoring proper fit and preventing movement or rattling. Direct-fit design replaces a worn, cracked or broken holder to keep parts stable during normal operation. What it does

• Secures panels, racks or small internal components in place to prevent shifting.
• Restores correct alignment when a broken holder allows parts to sag or detach.
• Eliminates rattling or vibration caused by loose or damaged mounts.
• Helps maintain proper operation by keeping components positioned as intended.

• Disconnect power (and water supply if applicable) before starting repair.
• Remove any obstructing panels or accessories to access the holder; keep track of fasteners.
• Install the new holder in the same orientation; snap or fasten it until it seats securely—do not force or overtighten.

Includes screws.

This flexible water hose routes water between internal components in your appliance. Replacing a worn or cracked hose restores a sealed, reliable water path to help prevent leaks and water-flow issues.

• Directs water between assemblies to maintain proper flow
• Helps keep the water path watertight to avoid leaks
• Can resolve symptoms like slow/failed draining, pooling water, or visible drips
• Replaces hoses that are brittle, cracked, kinked, or clogged

• Disconnect power and shut off water supply before servicing
• Place towels or a pan to catch residual water; note original routing
• Move over and secure existing clamps/seals; avoid kinks during routing
• Run a test cycle and check all connections for leaks

This flexible inlet/fill hose routes water into the appliance, restoring proper water delivery for normal operation. Replace a damaged hose to stop leaks and ensure reliable water flow. What it does:

• Carries incoming water from the supply to the appliance fill assembly
• Prevents water leaks when intact; a cracked or split hose can cause pooling or drips
• Restores normal fill behavior when worn or collapsed hoses reduce flow
• Works with clamps or fittings at each end to create a watertight seal

• One flexible inlet/fill hose

• Turn off the water supply and disconnect power before removing the old hose
• Inspect and replace any worn clamps, gaskets, or fittings for a secure seal
• Hand-start fittings, then tighten with tools—avoid over-tightening to prevent damage
• After installation, restore water and power, then run a short cycle and check for leaks