Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Wc2x5144 Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Appliance 10-32 Machine Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP179051

Replacement 10-32 machine screw for securing panels, brackets, and internal components. Ideal for replacing missing, stripped, or damaged hardware.

Do-It-Yourself Stories from Customers like You Bake element broken on jenn air model s125 downdraft slide in range   Patricia D. • Raleigh , NC • May 02, 2015

Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more

More
$7.94

IN STOCK
Ships Today Guaranteed
Add to Cart
Screw, 1 Piece
Genuine Whirlpool part
By: Whirlpool
Part Number: W11233072

This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.

  • Fastens panels, brackets, covers, or internal parts to the chassis or frame
  • Helps maintain alignment and support, reducing rattle, vibration, or looseness
  • Replaces missing or damaged screws that have backed out, broken, or stripped
  • Restores secure mounting after service when original hardware is lost
What's included: 1 screw Install notes:
  • Disconnect power; shut off water or gas supplies before servicing
  • Use the correct driver; start threads by hand to avoid cross-threading
  • Match length and thread to the original location; do not substitute with longer hardware
  • Tighten snugly; do not overtighten into plastic or thin metal

Do-It-Yourself Stories from Customers like You Bake element broken on jenn air model s125 downdraft slide in range   Patricia D. • Raleigh , NC • May 02, 2015

Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more

More
$21.46

IN STOCK
Ships Today Guaranteed
Add to Cart
Hose Clamp
Genuine Whirlpool part
By: Whirlpool
Part Number: WP616099

This hose clamp secures a hose connection to prevent leaks and keep your appliance running smoothly. It provides a tight, reliable hold on the hose fitting so water or air stays contained during operation.

  • Tightens around a hose and fitting to maintain a secure seal
  • Helps stop drips, seepage, or loose connections
  • Common fix when you see moisture around a hose joint
  • Useful if a clamp is rusted, stretched, or no longer holding tension
What's included: One hose clamp. Install notes:
  • Unplug power and shut off water (if applicable) before servicing
  • Note clamp position/orientation before removal
  • Use appropriate screwdriver or nut driver to tighten evenly
  • Do not overtighten—ensure a snug, leak-free seal without damaging the hose

This part fixes the following symptoms
  • Leaking
See more...
Do-It-Yourself Stories from Customers like You Water leak   Steven K. • New City , NY • August 10, 2018

Took off cover, installed new parts. Read more

More
$4.60

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Trunnion Plate
Genuine Frigidaire part
By: Frigidaire
Part Number: 137107000

Secures the washer's inner basket to the drive hub, keeping the tub centered and stable during spin. Replace if cracked, corroded, or bolts are damaged.

Do-It-Yourself Stories from Customers like You Leaking washer tub   Hugh S. • Miami , FL • June 25, 2016

The seal at the bottom of the tub had started to fail. On large loads water would leak so I ordered a new one rubber seal. Getting the trunnion off the transmission shaft was hard as it was calcified and corroded. I used a wire brush to get some of it off and then used a lot of WD-40. The bolt holding the trunnion plate on sheared off when I tried to remove it on one side and the other came out ok (the bolt hole through the trunnion is not threaded so it should slide out once the plate is off... Read more

More
$23.38

IN STOCK
Ships Today Guaranteed
Add to Cart
Refrigerator Pan Head Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3-24004-109

Pan head screw secures panels, brackets, and trim on refrigerators and freezers. Replace missing, stripped, or damaged screws to restore proper fastening.

Do-It-Yourself Stories from Customers like You Missing crisper drawer   Doug D. • Peoria , AZ • March 23, 2020

Looked up model on your website. You had all the parts I needed, numbered and visually shown. Perfect! Read more

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Touch Up Paint - Blk
Genuine Whirlpool part
By: Whirlpool
Part Number: 72032

Bottle with brush. Color: Black. Size: 0.6 fl.oz.

Do-It-Yourself Stories from Customers like You Leaking diaphragm   Herbert S. • Monroe Township , NJ • January 03, 2015

Replaced It With New One Read more

More
$30.32

IN STOCK
Ships Today Guaranteed
Add to Cart
Hose Clamp
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489503

This hose clamp secures a rubber or plastic hose to its fitting to maintain a tight, leak-resistant seal. Replace a worn or missing clamp to stop drips and keep appliance water connections secure.

  • Fastens a hose to a barb or port to prevent leaks
  • Helps keep hoses from slipping off due to vibration or pressure
  • Restores proper sealing when a clamp is rusted, bent, or stripped
  • Common symptoms: water dripping at a hose joint, loose hose connection, or a clamp that won't tighten
What's included: 1 hose clamp Install notes:
  • Disconnect power and shut off the water supply before servicing
  • Place a towel to catch residual water when removing hoses
  • Position the clamp just behind the hose barb/bead and secure with the appropriate tool
  • Restore water and power, then run a quick check for leaks at the connection

This part fixes the following symptoms
  • Leaking
See more...
Do-It-Yourself Stories from Customers like You Leaking bleach tube   Mike C. • Willow Grove , PA • May 21, 2017

Replaced the tube and the clamp Read more

More
$7.49

IN STOCK
Ships Today Guaranteed
Add to Cart
Refrigerator Filter Drier
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10143759

Refrigerator not cooling properly? A clogged filter drier prevents proper refrigerant flow. Requires professional installation due to sealed system.

Do-It-Yourself Stories from Customers like You Failed to cool due to hole/s in evaporator leaking freon   Gerald L. • Myrtle Beach , SC • August 17, 2017

Ordered new Evaporator part and Drier from Appliance Pros. The part arrived earlier than expected and was properly packaged. I had both parts installed by a professional as they required a level of expertise above my capabilities. Works perfectly. Read more

More
$29.48

IN STOCK
Ships Today Guaranteed
Add to Cart
Dryer Motor Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY015825

This is a metal clip that secures the drive motor in place within the dryer cabinet. It clamps around the motor housing to prevent movement during operation. Replace this clip if it is broken, missing, or bent, which can cause the motor to shift and create excessive vibration, rattling noises, or belt misalignment.

Do-It-Yourself Stories from Customers like You Very loud rumble and grinding noise. Burning smell.   Richard C. • Westminster , CA • November 11, 2023

Ultimately is was discovered and caused by the blower wheel shaft opening was cracked and broken. Replaced blower fan wheel. Read more

More
$14.41

IN STOCK
Ships Today Guaranteed
Add to Cart
Screw (Black)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP7101P126-60

This factory fastener secures panels, trim, or brackets on your appliance. Replacing a missing or stripped screw restores a snug, rattle-free fit and keeps components aligned for proper operation and a clean, finished appearance.

  • Fastens exterior panels, trim pieces, or internal brackets to the appliance chassis
  • Replaces lost, damaged, or stripped hardware
  • Helps prevent vibration, rattling, and gaps between parts
  • Common signs you need this screw: missing hardware, loose or misaligned panel/trim, stripped head or threads
What's included: One screw Install notes:
  • Disconnect power before servicing; also shut off the gas supply
  • Use the correct driver; start the screw by hand to avoid cross-threading
  • Tighten snugly—do not overtighten to prevent stripping or cracking adjacent parts
  • Repair or replace the mounting point before installing

Do-It-Yourself Stories from Customers like You Oven element was burnedout   Robert J. • Hope , ME • February 08, 2015

Turned off breaker,unscrewed (2 screws) element,pulled element out from back of oven,unplugged 2 wires, attached wires to new element, pushed back in, installed retaining screws Read more

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Bolt
Genuine Frigidaire part
By: Frigidaire
Part Number: 137539500

This replacement bolt secures internal components in your appliance. A stripped, rusted, or missing bolt can let parts loosen and vibrate; installing a new bolt restores a tight, stable connection for reliable operation.

  • Provides a secure, threaded fastener for brackets, weights, or assemblies
  • Helps maintain alignment and reduce movement during operation
  • Typical issues: missing hardware, stripped threads, or visible corrosion
  • Helps address rattling or excessive vibration caused by loose hardware
What's included: 1 bolt
  • Safety first: Disconnect power; for water- or gas-connected units, shut off supplies
  • Support the component being secured before removing the old fastener
  • Start threads by hand to avoid cross-threading; tighten evenly to manufacturer guidance—do not overtighten
  • Reuse original washers/spacers and thread locker only if they were originally present

Do-It-Yourself Stories from Customers like You Leaking washer tub   Hugh S. • Miami , FL • June 25, 2016

The seal at the bottom of the tub had started to fail. On large loads water would leak so I ordered a new one rubber seal. Getting the trunnion off the transmission shaft was hard as it was calcified and corroded. I used a wire brush to get some of it off and then used a lot of WD-40. The bolt holding the trunnion plate on sheared off when I tried to remove it on one side and the other came out ok (the bolt hole through the trunnion is not threaded so it should slide out once the plate is off... Read more

More
$15.28

IN STOCK
Ships Today Guaranteed
Add to Cart
Nameplate (Grey)
Genuine Whirlpool part
By: Whirlpool
Part Number: W11178521

Color: Grey

Do-It-Yourself Stories from Customers like You Broken grill vent & cut power cord on microwave   Karl B. • Goshen , KY • April 24, 2019

The grill vent is only held in place by two screws. Super simple fix. Remove the two screws and the old grill vent, position the new vent and put the two screws back in. Replacing the cord required that cabinet to be removed. Lots of screws on the back, top and bottom. Once the screws were removed, the cabinet pulled back. The power cord connections were then clearly visible. Undid the two wire connectors and unscrewed the ground wire from the body to remove the old power cable. Installed the... Read more

More
$53.21

IN STOCK
Ships Today Guaranteed
Add to Cart
Dishwasher Coupler Gasket
Genuine Whirlpool part
By: Whirlpool
Part Number: WP910218

Seals the coupler connection on portable dishwashers to prevent leaks at the faucet adapter. Replace when worn, cracked, or flattened to stop drips.

Do-It-Yourself Stories from Customers like You The coupler was leaking badly   Eric T. • St Clair Shores , MI • May 09, 2015

Replaced the coupler gasket. No leaks now. Read more

More
$6.48

IN STOCK
Ships Today Guaranteed
Add to Cart
Refrigerator Compressor Overload Protector
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2183456

Refrigerator not cooling or compressor won't start? This overload protector prevents motor damage from overheating. DIY-friendly fix in under 30 minutes.

Do-It-Yourself Stories from Customers like You Refrigerator stopped working   Patrick H. • Walland , TN • July 04, 2016

Used a muiltimeter to test all parts and ohm'ed out all parts. found out condenser fan motor seized up [open winding in motor] replaced that, and found that also caused the compressor overload and relay to fail, from over heating and over cycling, replaced both parts, powered up the refrigerator retested all electrical parts checked amp reading on all parts under load conditions,works good know, hope to get another 15 years out of this refrigator, its a maytag. over 20 years old. Read more

More
$68.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Inlet Hose Gasket
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY013783

This is a rubber gasket that sits inside the water inlet hose connection on your washing machine. It creates a watertight seal between the hose fitting and the water supply valve to prevent leaks. Replace this gasket if you notice water dripping from the hose connections at the back of the washer.

This part fixes the following symptoms
  • Leaking
See more...
Do-It-Yourself Stories from Customers like You Pretty much everything   Charlotteanne Y. • Kingston , IL • August 06, 2018

Here's the story. All my appliances except the dryer broke. Yeah. talk about bad luck. First I tried to fix the refrigerator. Replaced both motherboard and inverter board. Now it wakes up but the compressor does not kick in. Need another part. The washer, well I have to pull out the sink to get enough room to pull out the washer to fix it. Since the refriigerator is still in the middle of the kitchen, I don't need to tear apart another room. Nevertheless, let me say this, I love my "older"... Read more

More
$6.72

IN STOCK
Ships Today Guaranteed
Add to Cart
Appliance Touch-Up Paint
Genuine Whirlpool part
By: Whirlpool
Part Number: 4392899

Touch-up paint for appliances. Covers chips, scratches, and worn areas on range tops, refrigerators, and other appliances. Includes brush applicator.

Do-It-Yourself Stories from Customers like You Lack of accurate control on 2 electric range burners   Jeff D. • Neenah , WI • April 09, 2016

Ordered 2 infinite burner controls from Appliance Parts Pros and watched the online video on the replacement of them at the same time. When they arrived promptly, I was ready to take on the job. The fix only took about 15 minutes because I was prepared after watching the video. Read more

More
$30.32

IN STOCK
Ships Today Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google