Wdf580afm2 Parts

The Cntrl-Elec is an OEM part for Whirlpool dishwashers. As the control and electronic component, it governs all of the major functions and operations of the dishwasher. The control board contains integrated circuits, microprocessors, and electronic components that facilitate cycles, temperature regulation, safety features, and user input.

Over time, the electronic components inside the controller can degrade or become damaged. Environmental factors like surges, fluctuations in power, and other electrical issues may also potentially cause failure. 

Symptoms of a bad controller can include:

• Not operating or cycling at all
• Inability to start or stop cycles
• Fault codes displayed
• Issues with heating or drying
• Buttons or control panel not responding

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement handle restores a solid, comfortable grip so you can operate your appliance as intended. It replaces a damaged, loose, or missing handle to bring back clean looks and everyday usability. What it does

• Provides a secure grip for opening and closing the appliance
• Restores normal operation when the original handle is cracked, broken, or missing
• Helps prevent wobbling or rattling caused by a loose handle
• Maintains proper user access to the door or drawer

• Handle

• Disconnect power to the appliance before starting; allow hot surfaces to cool
• Support the door or drawer if removal is required to access fasteners
• Transfer and reuse original screws/end caps if applicable; tighten evenly and do not overtighten
• After installation, verify the handle is secure and the door/drawer operates smoothly

The Seal is an OEM part for Whirlpool dishwashers. As a crucial door component, it ensures a tight fit that prevents leaks and contains the necessary heat and moisture during operation. 

Symptoms of a bad seal can include cracks, tears, or looseness allowing water to escape during cycles. Deterioration from chemical exposure or repeated flexing over time is common.

Causes of a bad seal include general wear and tear, damage from improper loading of dishes, or accidents like sharp objects puncturing the material.

Symptoms of a bad seal include: 

• Puddles or pools of water found beneath the dishwasher after cycles
• Wet floors and surfaces surrounding the dishwasher  
• Steam or moisture visible escaping during heating phases
• The door not closing or latching properly

This OEM Whirlpool replacement part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

The Inner Door Assembly is an OEM part for Whirlpool dishwashers. Located inside the dishwasher door, this assembly includes components like the door springs, rollers, and locking mechanisms that secure the inner door in place. It works internally to provide structure and support to the door and seal tightly against the tub when closed.

Causes of a bad inner door assembly can include wear and tear over time, damage to springs or rollers, or issues with the locking mechanism not functioning properly.

Symptoms of a bad inner door assembly include:

• The inner door not sealing correctly against the tub
• Gaps forming around the inner door seal
• Difficulty opening or closing the door
• Squeaks or noise coming from the door area

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This left-hand door hinge supports and pivots the door so it opens smoothly and closes tight. Replace a worn hinge to correct sagging, rubbing, or doors that won't seal—improving performance and preventing damage. What it does:

• Provides the pivot point for the door on the left side
• Maintains alignment so the door sits level and latches/seals properly
• Helps the door open and close smoothly without binding
• Common symptoms: door sags or rubs, won't close fully, uneven gaps, squeaking/grinding noises, poor seal

• One left-hand door hinge

• Disconnect power; also shut off gas and/or water before servicing
• Support or remove the door before unfastening the hinge; some hinges may be under spring tension—use caution
• Transfer original hardware/shims as needed and tighten fasteners securely
• Check door alignment and gasket contact after installation; open/close several times to ensure smooth operation

• "Left-hand" is determined when facing the front of the appliance.

Right-hand door hinge that replaces a worn or damaged refrigerator door hinge to restore proper door alignment and smooth opening and closing. Helps maintain a tight seal and prevents door sag or binding. What it does:

• Supports and pivots the refrigerator door on the right-hand side for correct alignment.
• Restores smooth opening/closing and reduces rubbing or scraping at the cabinet.
• Helps re-establish a full door seal to prevent cold air loss and temperature issues.
• Addresses symptoms such as a sagging or misaligned door, noisy hinge movement, or a door that doesn't close evenly.

• Disconnect power to the appliance and remove any items from the door before starting.
• Support the door while removing hinge hardware to prevent sudden drops or damage.
• Reuse existing screws/hardware unless replacement hardware is provided; tighten securely but avoid over-torquing.
• After installation, check door alignment and gasket contact; adjust hinge position as needed to ensure proper sealing.

The Thermostat Clip is an OEM part for Whirlpool dishwashers. It plays an important supporting role by securely fastening the thermostat sensor inside the wash chamber. 

Symptoms of a faulty Thermostat Clip can include:

• Fluctuating or inconsistent water temperatures between cycles 
• Inability to properly detect temperature for desired heat levels
• Longer cycle times needed for reaching required temperatures
• Strange sounds or condensation around thermostat connection

Causes could arise from typical wear and tear stresses weakening plastic retaining clips. Exposure to harsh detergents may also erode clip material integrity over time.

This OEM replacement part is compatible with KitchenAid, Jenn-Air, Kenmore, and select Hotpoint and Roper dishwasher models as well. 

This dispenser is the front housing that channels ice and water from the refrigerator to the user, restoring proper dispensing and a finished appearance. It fits into the refrigerator door and works with the dispenser controls. What it does:

• Directs and channels ice and water from the internal supply to the exterior dispenser opening
• Provides the mounting surface and openings for dispenser controls, actuator/lever, and chute
• Helps prevent leaks and misdirected water when the dispenser is working correctly
• Commonly replaced for cracked housing, broken mounting tabs, or cosmetic damage that affects dispensing

• One dispenser housing assembly

• Disconnect power and turn off the water supply before starting any repair
• Handle plastic clips and tabs carefully during removal to avoid breakage
• Reuse any electronic components only if compatible; replace damaged clips or seals
• After installation, turn on water and power and check for proper operation and leaks

This support bracket helps hold internal components in place to restore proper alignment and reduce movement. It's a simple replacement that stabilizes the affected assembly and helps stop rattling or sagging. What it does:

• Secures and supports a loose or misaligned internal component or panel
• Prevents shifting that can cause vibration, noise, or uneven operation
• Restores proper alignment to reduce wear on adjoining parts
• Functions as the OEM replacement for the original support bracket

• One support bracket

• Inspect the mounting points and surrounding parts for wear before installing
• Replace only with the matching OEM part number to ensure fit; fasten securely per manufacturer torque recommendations
• Disconnect power and follow basic safety precautions before servicing the appliance

Tube nut secures the end of a supply or drain tube to its fitting, helping restore a tight connection. Replace a worn or corroded nut to reduce leaks and ensure reliable tube attachment. What it does:

• Threads onto a tube/fitting to hold the tube in place and maintain a seal.
• Replaces stripped, corroded, or damaged nuts that cause loose connections.
• Common symptom fixes: visible dripping at a connection, loose tube, or poor flow from the hose.
• Used wherever a threaded tube nut is required to fasten a hose or tube to a valve or fitting.

• Turn off power and shut off water supply before replacing the nut.
• Inspect mating threads and any ferrules or O-rings; replace damaged components for a proper seal.
• Hand-start threads to avoid cross-threading, then snug with pliers—do not overtighten.

This feed tube assembly channels water where it belongs in the appliance, restoring proper flow and preventing misdirected or leaking water. Designed as a two-level, green plastic tube for direct replacement of the original part. What it does:

• Routes water from the inlet to the correct internal channels to support normal appliance operation
• Helps prevent leaks or puddling caused by cracked or clogged feed tubes
• Replaces damaged, warped, or discolored tubing that can interrupt water flow
• Can resolve symptoms like water dribbling inside the cabinet, poor dispensing, or intermittent water flow

• Disconnect power and water supply before starting any repair
• Inspect mating seals and clips; replace if damaged to ensure a watertight fit
• Handle plastic fittings carefully to avoid cracking; tighten connections per OEM guidance

This inner door panel replaces the damaged or worn interior panel on the appliance door to restore appearance and support proper sealing and operation. It helps stop drafts, heat or moisture loss, and prevents debris from entering the door cavity. What it does:

• Replaces a cracked, dented, or warped inner door panel that affects door fit and appearance
• Restores the inner surface that supports insulation and inner door components
• Helps reduce heat, steam, or moisture transfer through the door
• Can stop rattling or gaps caused by a loose or damaged inner panel

• One inner door panel as shown

• High-level replacement: remove the outer door panel and any trim to access and swap the inner panel
• Handle edges and fasteners carefully to avoid scratching the door finish
• Unplug the appliance or disconnect power before beginning work to prevent electrical hazards

This toe panel is the lower front kick panel that restores the appliance's finished appearance and covers components at the base. It replaces a damaged or missing panel to keep the area tidy and protected. What it does

• Covers the appliance's lower front opening and conceals internal components.
• Restores the unit's exterior appearance after damage, dents, or corrosion.
• Helps keep dirt and debris out of the base area.
• Provides the necessary access cover removed during service.

• One toe panel (single lower front kick panel).

• Disconnect power to the appliance before starting any service.
• Remove any adjacent trim or access panels to reach mounting screws.
• Handle panel edges carefully to avoid scratches; use appropriate fasteners if originals were lost.

This leveling leg threads into the appliance base to adjust height and stabilize the unit on uneven floors. Replacing a worn or missing leg restores proper balance, helping reduce vibration, noise, and rocking for smoother, safer operation.

• Provides height adjustment to level the appliance front-to-back and side-to-side
• Helps prevent rocking, excessive vibration, rattling, and "walking"
• Supports proper door/tub alignment and sealing
• Replace when the foot is cracked, missing, or the threads are stripped

• Disconnect power and, if applicable, shut off water supply before servicing
• Carefully slide or tip the appliance enough to access the leg location
• Unthread the old leg and hand-thread the new leg to avoid cross-threading; adjust until level
• Ensure all legs contact the floor and the cabinet is stable before restoring power/use

This Tube-Feed supplies water to the appliance's ice/water system, restoring proper water flow to the ice maker or dispenser. A direct-fit replacement that helps stop reduced ice production or interrupted water delivery. What it does:

• Routes incoming water from the inlet to the ice maker or dispenser assembly
• Restores proper water flow when the original tube is cracked, kinked, or clogged
• Helps stop leaks or puddling caused by damaged tubing when installed correctly
• Works with the appliance's original fittings and seals to maintain a secure connection

• One Tube-Feed

• Disconnect power and shut off the water supply before starting any repair
• Inspect fittings and seals; replace any damaged clamps or gaskets for a watertight connection
• Avoid sharp bends or kinks when routing the tube; secure with existing clips
• Turn water back on and check all connections carefully for leaks before restoring power