Wdf580afm2 Parts

This replacement screw secures appliance panels and components so they stay tight and aligned. Replace a missing, rusty, or stripped fastener to restore a solid hold and reduce vibration or rattling during operation. What it does:

• Fastens and secures panels, brackets, trim, or internal components as specified for your model
• Replaces missing, corroded, or stripped hardware to restore a proper fit
• Helps prevent vibration, rattling, and misalignment caused by loose fasteners
• Addresses issues like a loose panel/handle or a screw head that's rounded off

• 1 screw

• Disconnect power; if applicable, shut off gas and water before servicing
• Use the correct driver size; start by hand to avoid cross-threading
• Tighten snugly—do not overtighten into plastic or thin sheet metal
• Keep track of original screw locations and lengths during reassembly

This motor-pump assembly replaces the washer's combined motor and pump to move water out during drain and spin cycles, restoring proper draining and helping reduce drain-related noise and standing water in the tub. What it does:

• Pumps water out of the tub during drain and spin cycles.
• Drives the impeller that clears water through the drain hose and pump housing.
• Common symptoms: washer won't drain, water remains after cycle, loud humming/grinding or vibrating during drain, or intermittent drain failures.
• Stops or limits water flow caused by pump failure or seized impeller.

• Always disconnect power and turn off water supply before beginning service.
• Follow the appliance's service manual and wiring diagram for safe removal and reconnection of electrical and plumbing connections.
• Inspect hoses, clamps, seals and mounting gaskets when replacing the pump; replace any damaged parts to prevent leaks.

This replacement panel restores a clean, finished look and protects the components beneath. Replace a cracked, dented, or warped panel to ensure a proper fit and durable coverage exactly as designed by the manufacturer.

• Provides the finished exterior surface for the appliance
• Shields and supports underlying components as designed
• Replaces panels damaged by impact, heat, or wear
• Common signs: visible cracks/dents, loose mounting points, gaps, or rattling

• Disconnect power; turn off gas/water to the appliance if applicable
• Protect surrounding finishes; handle carefully to avoid scratches
• Transfer any reusable brackets, clips, and screws from the original panel
• Align tabs/holes and tighten fasteners evenly—do not overtighten

Restore worn dishwasher racks and help prevent rust stains on dishes. This white rack repair kit covers chipped or exposed rack tines and caps bare metal to reduce corrosion and extend the useful life of your racks.

• Re-coats rusted or chipped vinyl on rack tines to help stop corrosion
• Caps exposed tips to reduce rust transfer, scratching, and snags
• Useful when tine caps are missing or the rack coating is flaking
• Common symptoms: rust on tines, stained dishes, sharp/rough tine ends

• Disconnect power and remove the rack before repair
• Clean and dry affected areas thoroughly before applying coating
• Apply in a well-ventilated area; allow full cure time before using the dishwasher
• Replace the rack if metal is severely corroded or broken

This clamp secures a hose, tube, or bellows connection inside your appliance, keeping the joint tight to help prevent leaks and disconnections during operation. A worn or loose clamp can allow fluid to escape or a line to slip off. What it does:

• Holds a hose/tube/bellows firmly to its fitting to maintain a tight seal
• Helps prevent leaks or drips at the connection point
• Keeps lines from vibrating loose during use
• Common symptoms include a line that won't stay attached, fluid at a joint, or a visibly deformed/rusted clamp

• 1 clamp

• Disconnect power; turn off water supply if applicable
• Use the appropriate tool for the clamp style (pliers for spring clamps; screwdriver/nut driver for worm-gear types)
• Fully seat the hose/tube on the fitting and position the clamp just behind the ridge/bead
• Tighten/compress evenly; restore service and check for leaks while operating

Insulation pad that fits behind appliance panels to restore thermal protection and reduce noise. Replacing a damaged or missing pad helps protect nearby wiring and components from heat and can reduce vibration-related rattling. What it does:

• Provides thermal insulation to help limit heat transfer to adjacent panels and components.
• Dampens vibration and reduces rattling or buzzing caused by loose or worn insulation.
• Protects wires, connectors and plastic parts from excess heat when installed correctly.
• Common symptom: missing, torn, or deteriorated pad with increased exterior heat or noise.

• Disconnect power to the appliance before servicing to avoid shock or injury.
• Remove access panels as needed; position the pad flat against the cabinet surface or mounting area.
• Use original clips/adhesive or manufacturer-recommended fasteners to secure the pad; avoid covering vents or controls.

This drain pump removes wastewater from the dishwasher at the end of the cycle, helping restore proper draining and prevent standing water, odors, and error codes caused by a failed or obstructed pump. What it does:

• Pumps wash water out through the drain hose to the home drain
• Helps prevent standing water in the tub after a cycle
• Addresses drain-related error/fault codes
• Common symptoms include loud humming or grinding during drain, slow or no draining, and leaks around the pump housing

• 1 drain pump assembly

• Disconnect power and shut off water before servicing
• Bail out remaining water and protect the floor; access is typically from the bottom/front (toe-kick area varies by model)
• Inspect and clear the drain hose, air gap, and check valve while the pump is out; ensure the pump O-ring/gasket seats correctly and clamps are secure
• After installation, run a short fill-and-drain to verify operation and check for leaks

This tube nut secures the water inlet tubing to its fitting, creating a tight, leak-resistant connection. Use it when the original nut is cracked, stripped, or can no longer hold the line securely.

• Tightens over the inlet fitting to clamp the water tube and form a reliable seal
• Helps stop drips at the water-line connection point
• Addresses loose or damaged inlet connections and difficulty keeping the tube seated
• Commonly replaced when the nut is worn, cross-threaded, or visibly cracked

• Disconnect power and shut off the water supply before servicing
• Place a towel to catch residual water and relieve line pressure
• Hold the fitting with one wrench while tightening the nut with another to avoid twisting components
• Do not overtighten; restore water and check for leaks after installation
• Inspect the tubing, ferrule/sleeve, and insert; replace if worn or damaged

This adjustable leveling leg threads into the appliance base to set height and stabilize the cabinet. Replacing a worn or missing leg helps stop rocking and vibration and helps maintain proper alignment for reliable operation.

• Provides adjustable support at one corner of the appliance
• Helps level the unit for correct alignment with floor or cabinetry
• Reduces rocking, vibration, and rattling noises
• Replaces stripped, bent, cracked, or missing leg

• Disconnect power and, if applicable, shut off water before servicing
• Carefully support or brace the appliance to access the base safely
• Start the new leg by hand to avoid cross-threading; adjust height gradually
• Use a level to check side-to-side and front-to-back, then recheck after positioning

Replacement 8-32-thread screw used to secure panels, brackets and small components in compatible household appliances. Restores missing or stripped fasteners so panels and parts stay firmly attached during normal use. What it does:

• Secures trim, panels, brackets and control housings to maintain proper assembly.
• Replaces missing or damaged screws that can cause rattling, loose panels or misaligned components.
• Fits locations that require an 8-32 threaded fastener; correct length and head style for your application.
• Helps restore stable, vibration-free operation when worn or stripped fasteners are replaced.

• Disconnect power and water before servicing; wear eye protection and gloves.
• Use the correct screwdriver or driver bit to avoid stripping the screw head.
• Do not overtighten—turn until snug and secure to avoid damaging threads or surrounding parts.
• If the original used a washer or nut, reuse or replace as needed and the screw length and head type match the original.

This float assembly sits in the dishwasher tub and rises with incoming water to signal the float switch to stop filling. Replacing a worn or sticking overfill protector restores proper water level control and helps prevent overfilling and leaks.

• Monitors water level by floating upward as the tub fills
• Triggers the float switch to shut off the inlet valve at the correct level
• Helps prevent overfilling and potential leaks
• Helps with: won't fill or stops filling early, water level too high, float sticks or is visibly damaged

• Disconnect power and shut off the water supply before servicing.
• Remove the lower rack to access the float inside the tub.
• Lift the old float straight up; on some models a retainer under the tub must be released to remove it.
• Transfer any existing hardware if needed, install the new float, ensure free movement, then restore power and test for proper fill.

This fine mesh plastic screen filters debris from the water path to protect downstream components and help maintain proper wash performance.

• Traps fine particles to prevent clogs in the circulation/inlet path
• Helps reduce spray pressure loss and poor cleaning results
• Can address issues like gritty residue, reduced water flow, or noisy pump operation
• Wear, mineral buildup, or tearing can require replacement

• Disconnect power and shut off water before service
• Note orientation and seating of the original screen; install the replacement fully and evenly
• Inspect surrounding seals and mating parts; clean any sediment before reassembly
• Restore power/water and check for leaks and proper operation

Color: Black. Size: 12 oz. Acrylic appliance aerosol can spray paint.

The Stop is an OEM component specifically designed for Whirlpool dishwashers. It is located inside the tub assembly and helps secure the upper rack during washing cycles.  

Causes of a bad rack stop can include broken or cracked mounting points from years of rack impact and stress. Accumulated mineral deposits may hinder smooth sliding motion.

Symptoms of a bad stop include:

• Rattling or clanking noises coming from racks  
• Difficulty fully inserting or removing dish racks
• Racks rolling or slipping out of desired position 

The stop plays an important role in maintaining rack position throughout spray cycles for optimal cleaning coverage. Precise alignment contributes to hygienic sanitization and effective drying.

This OEM Whirlpool replacement part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

Size: 8-18 x 1/2 inch.

Replacement clip that secures the dispenser guard on compatible Whirlpool refrigerators. Replacing a damaged or missing clip restores a secure dispenser trim and can reduce rattling or misalignment around the dispenser area. What it does:

• Secures the dispenser guard/trim to the dispenser assembly to keep the trim aligned.
• Commonly needed when the guard is loose, rattling, cracked or falls out.
• Replaces broken or missing clips that allow the dispenser trim to move or vibrate.
• Helps restore proper fit of the dispenser trim so the dispenser components sit flush.

• Disconnect power (unplug or turn off the circuit) and shut off the water supply if working near the water/ice dispenser.
• Remove the dispenser trim or guard per the model's service instructions; handle plastic parts gently to avoid cracking.
• Align the clip with the mounting slot and engage until seated; if access is limited or the guard is damaged, follow safety guidelines when servicing appliances.