Wdph8900j2ww Parts

This replacement shield fits over the heater/probe area to provide a protective barrier. It helps prevent direct contact and excessive radiant heat exposure, protecting nearby components and supporting accurate temperature sensing for consistent operation. What it does:

• Shields the heating element and adjacent temperature probe/sensor area
• Helps prevent heat damage to nearby plastics, wiring, and components
• Reduces the chance of items contacting or striking the heater/probe
• Common signs it's needed: cracked, warped, or missing shield; discoloration; rattling or an exposed probe/heater area

• 1 shield

• Disconnect power and allow all heated parts to cool before servicing
• Access the heater/probe area and note the original shield orientation
• Seat the shield fully; secure with existing clips/fasteners if applicable
• Verify clearances around the heating element before restoring power

Bottle with brush. Color: Black. Size: 0.6 fl.oz.

This heater support holds the heating element securely in place inside the appliance, maintaining correct alignment and clearance for reliable operation. Replacing a worn or broken support helps prevent sagging, noise, or damage from an out-of-position element.

• Secures the heating element to its mounting point to keep it stable
• Maintains proper spacing from nearby components and surfaces
• Helps reduce vibration, rubbing, or rattling noises
• Replace if the original support is cracked, warped, missing, or the element appears misaligned

• Disconnect power to the appliance before servicing; allow hot components to cool
• Access the heater per your model's service information; note the original orientation and routing
• Seat the support fully and handle element leads carefully to avoid damage

Bushing, Door spring

Note: Left Hand side with release lever.

Color: White

This dishwasher rack tine row replaces a damaged or missing row of tines, restoring proper spacing to hold dishes upright. It improves spray coverage, reduces item-to-item contact, and brings back the rack's original loading layout.

• Provides vertical supports to separate plates, bowls, and lids for consistent cleaning
• Replaces a bent, broken, or rusted row that allows items to tip or nest
• Helps reduce rattling and potential chipping during wash cycles
• Common symptoms: dishes falling over, poor cleaning where tines are missing, visible damage to the row

• Turn off power to the dishwasher before servicing and pull out the rack for access
• Release the old row from its retaining clips; note clip orientation
• Transfer reusable clips/hardware if needed and snap the new row in until fully seated
• Reinstall the rack and confirm the row locks in place and holds items securely

This surface burner gas manifold assembly routes gas from the supply to each burner on your range or cooktop. Replacing a worn or damaged manifold restores safe, consistent gas flow and reliable burner operation.

• Distributes gas evenly to the surface burners via the manifold rail
• Serves as the mounting/connection point for the burner control valve bodies
• Common symptoms include burners not lighting, low or uneven flames, or a gas odor near the control area
• Restores proper gas delivery after damage, corrosion, or impact to the original manifold

• Disconnect electrical power and shut off the gas supply before servicing.
• Take clear photos and label all connections to ensure correct reassembly.
• Use only gas-rated thread sealant where specified by the manufacturer and tighten fittings securely.
• After installation, restore gas and check all joints with a leak-detection solution; verify every burner ignites and flames are stable.

The Rinse Aid Cap seals the dishwasher dispenser's rinse aid reservoir. Replacing a worn, cracked, or missing cap prevents leaks and evaporation, helping the dispenser meter rinse aid properly during the final rinse.

• Provides a tight seal for the rinse aid reservoir
• Helps ensure correct rinse aid dispensing in the final rinse cycle
• Symptoms include: cap cracked or missing; rinse aid leaking or depleting quickly; residue or streaks near the dispenser

• Disconnect power to the dishwasher before servicing.
• Remove the old cap and clean any buildup around the dispenser opening.
• Hand-install the new cap until snug; do not overtighten.
• Fill the reservoir and check for leaks around the cap.

This replacement screw secures appliance panels, brackets, and internal components. Install it when original hardware is missing, stripped, or corroded to restore a solid, factory hold and help stop vibration, rattles, and misalignment.

• Provides secure attachment for covers, brackets, and assemblies
• Replaces missing, damaged, or rusted hardware
• Helps resolve loose panels, buzzing/rattling noises, or shifting parts
• Supports proper alignment and reliable operation when tightened correctly

• Disconnect power; shut off gas/water if applicable before service
• Match thread and length to the original; replace in the same location
• Start threads by hand to avoid cross-threading; tighten snugly—do not overtighten
• If washers, spacers, or threadlocker were present originally, transfer or replace them

This dishwasher pump and motor assembly circulates wash water through the tub and spray arms during the cycle. Replacing a worn or failed unit restores strong spray pressure, quieter operation, and consistent cleaning performance. What it does:

• Circulates wash water through the spray arms and filtration system
• Maintains water pressure for effective cleaning throughout the cycle
• Can help with symptoms such as no spray/poor cleaning, loud humming or grinding from beneath the tub, or a cycle that stalls due to a non-running wash motor

• 1 pump and motor assembly

• Disconnect power and water supply before servicing; use gloves to protect hands
• Remove the toe panel/kickplate and access the pump from the bottom of the dishwasher
• Place towels or a shallow pan to catch residual water; release hose clamps carefully
• Ensure seals seat properly and clamps are secure; run a test cycle and check for leaks

The Dishwasher Control Board is an OEM part for GE dishwashers. This component manages and regulates various functions of the dishwasher, such as the wash cycles, water temperature, and drying times. It acts as the central processing unit, receiving input from the control panel and sensors to ensure the dishwasher runs efficiently and correctly.

Over time, the control board can fail due to electrical surges, moisture exposure, or general wear from repeated use. A malfunctioning control board can disrupt the entire operation of the dishwasher, leading to performance issues.

Symptoms of a bad control board include:

• The dishwasher not starting or completing cycles
• Error codes or flashing lights on the control panel
• Inconsistent or incorrect wash cycles
• The dishwasher not heating water or drying dishes

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Dishrack Stop Clip is an OEM component specifically designed for Whirlpool dishwashers. It secures the sliding dishwasher rack at the rear of the tub.

Symptoms of a faulty stop clip include:

• Dishes shifting position or toppling during cycles of motion  
• Noisy clattering heard from partially-restricted rack movement
• The dishrack failing to fully retract or extend 

Over time, repeated force from dish impacts can bend the thin metal clip out of place. Fatigue causes it to lose retaining strength.

This OEM Whirlpool part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwasher models.

The Retainer is an OEM part for Whirlpool dishwashers. It securely holds the top spray arm in place underneath the dishwasher interior roof panel.

Causes of a bad retainer include cracking, breaking or deforming from repeated use and natural wear over time.

Symptoms of a bad top spray arm retainer are:

• Loosening or detachment of the upper spray arm during washing cycles
• Reduced or uneven water coverage for upper rack dishes
• Potential rattling or noise from an unsecured spray arm

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Size: 1/4 inch hex head, 10-12 x 1/2 inch.

These casters replace the base wheels on your appliance, restoring smooth rolling and easy positioning while helping protect floors. Use this 4-pack to refresh worn or missing wheels so the unit moves safely and sits level.

• Provides mobility by supporting the appliance on rolling wheels
• Makes it easier to move the unit for hookup, cleaning, or storage
• Helps maintain a stable, even stance when all casters are intact
• Replace if wheels are cracked, flat-spotted, wobbly/noisy, or missing

• Disconnect power and, if applicable, turn off the water supply; empty the unit before moving
• Protect the floor and get assistance; carefully tip or lay the appliance to access the base
• Remove old casters and install the new ones into the existing sockets/brackets; reuse original hardware if needed
• Set the unit upright, check for smooth rolling, and re-level as required