Wfg320mbs3 Parts

This burner valve controls gas flow to a single surface burner, restoring predictable flame control and safe operation. Use it to replace a worn or damaged valve that causes weak flames or inconsistent burner output. What it does:

• Regulates gas flow to a single surface burner so the flame responds to knob settings.
• Commonly replaces valves that cause a burner not to light, sputter, or produce a weak or uneven flame.
• Stops unwanted gas flow from a faulty valve that can lead to poor burner performance.
• Works as the direct replacement for the original OEM burner valve on compatible gas cooktops and ranges.

• Turn off the appliance power and shut off the gas supply before beginning any service.
• If you smell gas, stop immediately: ventilate the area, do not operate the appliance.
• Some cooktop/range disassembly may be required to access the valve—follow the OEM service instructions.
• After installation, check all gas fittings for leaks and verify proper burner operation before regular use.

This natural-gas orifice spud is sized for the 5K burner position on compatible gas cooktops and ranges. It meters gas to the burner to set proper flame height, helping restore consistent heat when the original orifice is clogged, damaged, or incorrect. What it does:

• Regulates gas flow for the designated burner; calibrated for the 5K position on natural gas systems
• Can help resolve weak or oversized flames, yellow/lazy flames, uneven heating, or intermittent ignition
• Required when converting back to natural gas on applicable units; not for LP gas
• Installs in the orifice holder/manifold beneath the burner head

• Shut off gas supply and power; allow the cooktop/range to cool completely
• Remove burner cap and head to access the orifice
• Use the correct nut driver; hand-start threads and tighten snugly—do not overtighten
• Reassemble, leak-check connections with soapy water, and verify flame quality per the service instructions

The Handle-Door (stl) is an OEM replacement part for Whirlpool brand gas ranges. It is the stainless steel handle assembly attached to the oven doors. 

Causes of a bad door handle can include wear and tear from regular use over time, as well as damage from exposure to high oven temperatures or accidental impacts.

Symptoms of a bad door handle involve: 

• Looseness, lack of grip or difficulty opening/closing doors
• Cracking, separation or failure of the handle mounting  
• Discoloration, melting or warping of the handle surface
• Issues safely accessing the oven interior

This Whirlpool replacement part is also compatible with KitchenAid, Jenn-Air, and some Kenmore models.

The Surface Burner Grate is an OEM part for Whirlpool ranges. It provides support and stability for your cookware while evenly distributing heat for efficient cooking.

A bad surface burner grate can be caused by regular use, accidental damage, or wear and tear over time. If you notice issues such as a cracked or warped grate, difficulty in placing or removing cookware, or uneven heating on the stovetop, it may indicate a problem with the surface burner grate.

Symptoms of a bad surface burner grate include:

• Uneven heating or hot spots on the stovetop
• Instability or wobbling of cookware during cooking
• Difficulty in cleaning due to damaged or warped grate surfaces

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This replacement screw secures appliance panels and components. Use this OEM fastener to swap out stripped, corroded, or missing hardware so assemblies stay tight, aligned, and quiet for reliable day-to-day operation.

• Provides secure attachment for panels, brackets, and internal assemblies
• Direct replacement for stripped, corroded, or lost screws
• Can help with symptoms like vibration, rattling, or loose/misaligned parts
• Supports proper fit to reduce gaps or unwanted movement

• Disconnect power; for gas or water appliances, shut off the supply before service
• Note hardware order and retain any spacers or clips from the original setup
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Repair or replace the mating part before installation

Color: Black. For biscuit order 98008169. For white order WP98008544.

Color: Grey

This gas tubing routes fuel from the appliance's gas valve to the burner or manifold. Replacing a bent, corroded, or leaking tube restores safe gas flow for reliable ignition, steady flame, and proper heating.

• Carries regulated gas from the valve to the burner/manifold
• Maintains a sealed pathway; damage can cause leaks, weak/no flame, or ignition failure
• Routed along the factory path to clear components and prevent kinks
• Replace if the tube shows cracks, corrosion, or deformation

• Shut off gas supply and electrical power; allow all surfaces to cool
• Work in a well-ventilated area; check every connection with an approved leak-detection solution after installation
• Route the tube exactly like the original—do not bend, crimp, or modify
• Tighten fittings securely; use thread sealant only where specified by the OEM (do not use tape on flare connections)

Bottle with brush. Color: Biscuit paint. It's point-six fluid ounces.

The Bracket is an OEM component specifically designed for Whirlpool ranges. It provides secure mounting and reinforcement for critical range subcomponents underneath the oven cavity.  

Causes of a bad bracket include stress fatigue from the weight of oven components over many years. Vibrations from oven use can also compromise its reinforcing structure.

Symptoms of a bad bracket include:

• Noises or rattling heard emanating from below the oven
• Visible bending, cracks, or separations in the metal    
• Components mounted to it shifting out of position

This OEM Whirlpool replacement bracket ensures components like the oven door and control panel remain firmly in place. Its sturdy construction contributes to long-lasting range integrity.

Replace yours if any symptoms appear. This part is also compatible with some GE, KitchenAid, and Kenmore ranges. Reliable mounting performance results from an OEM bracket replacement when needed.

The Burner Valve is an OEM part for Whirlpool ranges. This valve is responsible for controlling the flow of gas to the surface burners, allowing you to adjust the flame intensity for precise cooking. It ensures a smooth and reliable gas flow, allowing you to effortlessly adjust the heat levels for your cooking needs.

A bad surface burner valve can occur due to wear and tear, clogs, or damage to the valve mechanism. If you notice symptoms such as difficulty in igniting the burner, uneven flame, or gas leaks, it may be time to replace the surface burner valve.

Symptoms of a bad surface burner valve include:

• Difficulty in igniting the burner
• Uneven or weak flame
• Gas leaks

Restore the control and safety of your Whirlpool range by replacing the faulty or damaged surface burner valve with this genuine OEM part.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This appliance screw secures panels, brackets, and internal components. Replacing a stripped or missing screw keeps parts tight and aligned, reducing vibration and preventing noise for reliable day-to-day operation.

• Secures mounting points for panels, brackets, or assemblies
• Replaces stripped, rusted, or missing hardware to restore a solid attachment
• Helps reduce rattling, vibration, and misalignment from loose fasteners
• Maintains proper fit so components operate as intended

• Disconnect power; turn off water or gas before service
• Match the screw to its original location and replace one at a time
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver type/size specified for your model

Factory replacement screw that secures appliance components and hardware. Use it to replace a missing, stripped, or corroded fastener to restore a tight, rattle-free fit and help prevent loosening or damage from vibration.

• Fastens brackets, panels, or internal parts at the original mounting points
• Replaces worn or missing hardware to correct loose or misaligned components
• Helps reduce vibration-related noise and movement
• Matches the original thread and length specified for the application

• Disconnect power; shut off water or gas if applicable before servicing
• Compare to the original for thread and length match before installation
• Start threads by hand to avoid cross-threading; tighten snugly—do not overtighten
• Reuse any original spacers/washers if present; replace if damaged

The Burner Tube is an OEM part for Whirlpool ovens. It ensures the proper flow of gas to the burner, allowing for efficient and reliable heat distribution during the cooking process. It is responsible for delivering the necessary fuel to create the desired cooking temperatures.

A bad burner tube can occur due to wear and tear, clogs, or damage. If you notice symptoms such as uneven heating, weak flame, or a gas smell coming from the oven, it may be time to replace the burner tube.

Symptoms of a bad burner tube include:

• Uneven heating or hot spots in the oven
• Weak or irregular flame
• Gas smell coming from the oven

Repair your oven by replacing the faulty or damaged burner tube with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This bumper is a small cushioning stop used at contact points on the appliance. It absorbs impact and prevents metal-to-metal contact to reduce noise and protect surfaces when doors, drawers, lids, or racks close.

• Cushions closing to soften impact and protect finishes
• Serves as a stop to maintain proper spacing at the contact point
• Helps reduce slamming, squeaks, and rattles
• Replace if cracked, flattened, missing, or if new clunking noises occur when closing

• Disconnect power (and shut off water/gas if applicable) before servicing
• Note the bumper's original location and orientation
• Remove the old bumper and clean the mounting area or hole
• Press the new bumper fully into place and verify a secure fit and proper clearance

The Door Handle is an OEM part for Whirlpool ranges. It allows you to open and close the oven door, providing easy access to your cooking space.

A bad oven door handle can occur due to wear and tear, accidental damage, or excessive force. If you notice signs such as a loose or broken handle, difficulty in opening or closing the oven door, or a handle that feels unstable, it may be time to replace the oven door handle.

Symptoms of a bad oven door handle include:

• Loose or broken handle
• Difficulty in opening or closing the oven door
• Unstable or wobbly handle

Repair your range by replacing the faulty or damaged oven door handle with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.