Wfg505mobw2 Parts

The Valve-Brnr is an OEM part for Whirlpool ranges. It is responsible for controlling gas flow to the surface burner.

Symptoms of a bad valve-brnr include:

• Unstable or irregular flames when operating burners
• Inability to achieve desired flame height or control temperatures
• Burners that cannot be turned on or off properly
• Gas leaks from faulty valve components

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This replacement power cord restores the appliance's main AC connection so it can receive power safely. Use this cord when the original cable is frayed, cut, melted, or otherwise damaged to prevent intermittent power or electrical hazards. What it does:

• Replaces the appliance's factory power cable to restore reliable electrical connection.
• Transmits mains power from the outlet to the appliance's internal wiring and controls.
• Addresses symptoms such as no power, intermittent power loss, visible cord damage, or burn/melt marks at the cord or plug.
• Helps prevent electrical arcing or shorting caused by damaged insulation or exposed conductors.

• Disconnect the appliance from power at the breaker or unplug before starting any work.
• Verify the cord matches the appliance's connector and routing; do not modify cord ends or splices.
• Secure all strain reliefs and terminal connections per the appliance's service instructions.

The Hinge-Door is an OEM component specifically designed for Whirlpool gas ranges. It is the stainless steel door hinge assembly that allows smooth, controlled movement of the oven door. The hinges support the weight of the door and maintain proper alignment between the door and oven cavity.

Symptoms of bad door hinges include:

• Loose, wobbly, or sagging door that does not stay firmly in place
• Difficulty in fully opening or closing the door 
• Excessive noise or vibration from the hinges
• Pinholes, cracks, or other damage to the hinge surface

Causes of failure are typically wear over the heavy usage life of a range. Hinges may also become misaligned or damaged by accidental impact.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

This Holder ORF is a small OEM retainer that secures internal components so they stay aligned during normal use. Replacing a worn or broken holder restores proper fit and prevents rattling or part movement. What it does:

• Acts as a retainer to hold a specific internal component or assembly in place
• Prevents unwanted shifting, rattling, or misalignment during operation
• Helps maintain proper spacing and component alignment for reliable performance
• Commonly replaced when the original holder is cracked, broken, or missing

• One Holder ORF retainer (single piece)

• Disconnect power to the appliance before beginning any service
• Access may require removing panels or trim; keep fasteners organized
• Use basic hand tools; avoid force to prevent damage to surrounding parts

This main wiring harness connects the control console (LCC) to the appliance's electrical components, restoring reliable signal and power routing for controls. It replaces damaged or worn harnesses that cause intermittent or non-functioning controls. What it does:

• Routes power and control signals between the console LCC and internal components
• Restores lost or intermittent control functions caused by broken, frayed, or burned wires
• Prevents error codes or shutdowns from poor or corroded connector contacts
• Enables proper operation of buttons, displays, and control-driven features

• Disconnect power to the appliance before beginning any work to avoid electrical shock
• Handle connectors carefully; align pins and push fully to ensure secure connections
• Route harness along existing clips and channels to prevent chafing or pinching
• Inspect mating connectors and control board for damage before final assembly

This ground wire provides a safe chassis connection to restore proper grounding and reduce shock and electrical-fault risk. It replaces a frayed, corroded or missing ground lead to help keep the appliance electrically safe. What it does

• Connects the appliance chassis to the grounding system to prevent stray voltage on metal surfaces
• Restores a secure ground path if the original wire is broken, loose, or corroded
• Helps stop intermittent power faults or nuisance tripping caused by a compromised ground
• Addresses symptoms like visible wire damage, loose ground connection points, or grounding-related electrical issues

• One ground wire

• Always disconnect power (unplug or shut off the circuit breaker) before starting work
• Attach the ring/terminal ends to the designated chassis ground screw and the equipment ground point
• Route the wire away from moving parts, heating elements, and sharp edges; secure with existing clips or fasteners
• If terminal hardware is missing or damaged, replace with equivalent OEM-style fasteners and torque to specification

This mounting bracket secures appliance components and panels to keep assemblies aligned and stable, helping prevent rattles and loose parts. It's a simple replacement that restores proper fit and support where the original bracket has failed. What it does:

• Provides rigid support for internal components or exterior panels to maintain alignment
• Stops vibration and rattling caused by a broken or bent bracket
• Restores secure attachment points for screws and fasteners
• Helps prevent additional wear from loose parts moving during operation

• Always unplug the appliance or disconnect power before starting any repair
• Remove necessary access panels to reach the damaged bracket; keep track of fasteners
• Reuse original screws if undamaged; replace stripped or corroded fasteners
• If alignment issues persist after installation, recheck fit and mounting points for damage

This genuine ground screw secures appliance grounding connections to the chassis, helping maintain electrical safety and reliable grounding. It's a direct-fit fastener used where a secure ground point is required. What it does:

• Provides a secure chassis grounding point for appliance electrical safety
• Secures ground wires or grounding straps to sheet metal or grounding posts
• Helps prevent loose ground connections that can cause intermittent faults or safety risks
• Matches OEM thread and length for correct fit and electrical contact

• Use appropriate tools; avoid stripping the head or over-tightening which can damage threads or the grounding surface
• Ensure the mating surfaces are clean and free of paint or corrosion for good electrical contact
• Disconnect power to the appliance before servicing electrical grounding connections

A replacement manifold pipe that routes gas from the supply to the burner valves for safe, even fuel delivery. Restores proper gas flow so burners ignite and maintain consistent flame performance. What it does:

• Distributes gas evenly to the oven/range burner valves so each burner receives fuel.
• Helps restore reliable ignition and steady flame height when the manifold is cracked or blocked.
• Common symptom: burners fail to light, have weak or uneven flames, or multiple burners behave inconsistently.
• Important for safe operation of gas ranges and ovens—damaged manifolds can cause leaks or poor combustion.

• One manifold pipe

• Turn off gas supply and electricity before servicing; follow local codes.
• Inspect fittings and seals; replace associated gaskets or fittings if damaged.
• Check all connections for leaks with a non-corrosive leak detector after installation.

This replacement mounting screw secures panels and small components on compatible Whirlpool appliances, restoring proper fit and reducing rattles or loose parts for a solid, finished appearance. What it does

• Fastens control panels, trim pieces, or internal brackets to the appliance chassis
• Helps stop panel vibration, rattling, or misalignment caused by missing or worn fasteners
• Restores secure attachment after disassembly for service or part replacement
• Simple hardware replacement that maintains original fit and function

• Disconnect power to the appliance before servicing to avoid shock or injury
• Use the correct screwdriver or bit to avoid stripping the head
• Thread gently and stop when snug — do not overtighten to prevent damage to mating parts
• Keep removed hardware organized to ensure correct reassembly

The Door Glass (stl) is an OEM replacement part for Whirlpool ranges and ovens. It serves as the window that allows you to view the interior of the oven cavity during the cooking process. This door glass is designed to withstand high temperatures and provide a clear view while maintaining safety.

Symptoms of a bad door glass include:

• Cracked, shattered, or damaged glass
• Discoloration or clouding of the glass
• Loose or poorly fitting glass in the door frame
• Leaks or heat escaping around the door glass

Causes of a bad door glass can range from thermal stress due to sudden temperature changes, impact or physical damage, improper installation, or general wear and tear over time.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This spark module controls ignition for the surface burners, generating high-voltage pulses to the electrodes so the gas lights when you turn a knob. Replacing a failed module restores consistent, reliable burner lighting.

• Generates and distributes ignition spark to the surface-burner electrodes
• Activates when a burner knob/switch is turned to LIGHT
• Common symptoms of failure: no spark at all burners, intermittent ignition, continuous clicking, or burners that only light with a match
• If multiple burners lose spark together, the module or its power/ground is often suspect

• Disconnect power and shut off gas before servicing
• Access the module under the cooktop or behind the control panel; label wires and transfer one at a time
• Mount securely; ensure all spark leads and ground connections are fully seated and undamaged
• Restore power and test each burner for proper ignition

The Spark Ignition Switch and Harness is an OEM part for Whirlpool gas ranges. This set includes both the ignition switch component as well as its related wiring harness. 

Causes of issues can include worn or damaged switch components failing to reliably generate sparks, cracked insulation exposing conductors to shorts, or severed wires interrupting burner ignition circuits. 

Symptoms of problems are: 

• Erratic or unreliable burner ignition 
• Difficulty lighting one or more burners
• Indicator lights not illuminating as expected
• Activation of internal range fuses or breakers

This part is also compatible with Whirlpool-built ranges under Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore brands.

The Screw is an OEM part for Whirlpool ranges. It is a mounting hardware component that securely attaches range components.

Causes of bad range screws can include wear and damage due to repeated assembly/disassembly for maintenance or repairs over time. The threads can strip or break from overtightening. Vibrations during normal operation may also cause screws to loosen.

Symptoms of loose or damaged range screws include:

• Rattling or noisy noises coming from inside the range
• Components like handles or panels become loose or unstable
• Difficulty fully reassembling range parts properly

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.