Wfl2060uc Parts

This drum bearing set replaces worn bearings that support the dryer drum and enable smooth, stable rotation, restoring quieter operation and reducing wobbling, grinding, or squealing caused by failed bearings. What it does:

• Supports and stabilizes the drum shaft to maintain smooth drum rotation.
• Replaces worn or noisy bearings that can cause loud squealing or grinding.
• Reduces drum wobble and vibration that can lead to rubbing or uneven wear.
• Helps restore proper drum alignment for smoother operation.

• Disconnect power (unplug the appliance or switch off the circuit) before starting any repair.
• Replacement typically requires drum access/removal and basic hand tools; inspect the appliance service manual or diagram for disassembly steps.
• Inspect the shaft, seals, and surrounding components for wear while the drum is removed and replace any damaged parts.

The Lock-Electrical is an OEM part for Bosch washing machines. It serves as the latching mechanism that securely locks the washer door shut during active cycles. This locking component plays an important safety role by keeping the portal tightly closed while washing and spinning functions are underway.

Causes of a faulty lock-electrical can include wear from heavy use over time, water damage to internal electrical parts, or failed components governing the locking function.

Symptoms of a malfunctioning lock-electrical include:

• The door popping or being able to open during spinning or other active cycles
• Fault lights or failure to initiate wash cycles
• Loose, misaligned, or wobbly door latching motion
• Inability to fully secure the door in the closed position

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This water inlet hose gasket seals the connection between the supply hose and the appliance's inlet fitting. Replace a flattened or damaged washer to stop drips at the coupling and restore a reliable, watertight connection.

• Creates a watertight seal at the inlet hose-to-appliance connection
• Helps prevent drips, puddles, and water damage around the machine
• Replace if the old gasket is cracked, hardened, flattened, or missing
• Common symptoms: leaking at the hose coupling or needing to retighten the fitting to stop drips

• Disconnect power and turn off the water supply before servicing
• Place a towel to catch residual water, then detach the inlet hose from the appliance fitting
• Remove the old gasket from the hose coupling and seat the new gasket evenly
• Reattach and hand-tighten the coupling; open water supply and check for leaks—do not overtighten

This washing machine shock absorber stabilizes the outer tub during wash and spin. Replacing a weakened damper helps control vibration and noise so the washer runs smoother and is less likely to shake, bang, or walk.

• Mounts between the tub assembly and cabinet/base to cushion movement
• Helps prevent excessive vibration, shaking, and thumping noises
• Can reduce "walking" or out-of-balance interruptions when a damper is worn
• Supports smoother, quieter spin performance

• Disconnect power and turn off water supply before servicing
• Remove the appropriate access panel(s) to reach the dampers
• Support the tub when removing mounting pins/bolts; match the original orientation
• Inspect all dampers; replace any that show wear for balanced performance

Door handle pin secures the appliance door handle to the door assembly, restoring a firm, stable grip and preventing the handle from slipping or detaching. What it does:

• Acts as the pivot/fastening pin that holds the door handle to the door or door trim.
• Replaces worn, bent, or broken pins that cause loose, wobbly, or sagging handles.
• Helps prevent the handle from falling off or catching when opening and closing the door.
• Restores proper alignment and reliable leverage for normal door operation.

• Disconnect power to the appliance before starting any work; for water-connected appliances also turn off water supply.
• Remove the handle and any trim carefully to access the pin; keep small fasteners in a safe place.
• Install the pin in the same orientation as the original; if retaining clips or bushings were present, reuse or replace them as needed.
• If you encounter springs, clips, or hidden fasteners, proceed cautiously.

This flexible drain hose routes wastewater from the dishwasher tub to the drain pump or household drain, helping remove used water after a cycle. It replaces a damaged or leaking hose to restore proper draining. What it does

• Carries wastewater from the dishwasher to the drain pump or disposal
• Stops leaks and prevents water pooling when the original hose is cracked or split
• Helps resolve slow or incomplete draining caused by a compromised hose
• Fits the factory hose connections and follows the cabinet routing to avoid kinks

• One flexible drain hose

• Disconnect power and turn off water before beginning any repair
• Remove the lower access panel or toe kick to reach hose connections
• Inspect and follow the original routing; avoid sharp bends or kinks that restrict flow
• Secure hose with appropriate clamps and check all connections for leaks after testing

This front drum motor mounting bushing supports the dryer drum shaft and helps the drum spin smoothly for quiet, even drying. It replaces a worn bearing surface to reduce noise and prevent drum misalignment. What it does:

• Provides a low-friction bearing surface for the drum shaft at the front motor mount
• Helps keep the drum properly aligned during rotation
• Reduces squealing, grinding, or rubbing noises caused by a worn front bushing
• Prevents excess wear on the drum shaft and adjacent components when functioning correctly

• One front drum motor mounting bushing

• Disconnect power before beginning any repair and follow all safety precautions
• Inspect the drum shaft, drum seal, and rear bushing for wear and replace as needed
• Use appropriate tools to remove the old bushing and press or seat the new bushing evenly
• Re-check installation and related components if alignment or noise persists after replacement

2 included - Front load

This holder is a replacement mounting bracket that secures a small internal component in place to restore proper alignment and support. It helps keep parts stable so the appliance operates as intended. What it does

• Secures and supports an internal component to prevent movement or misalignment
• Replaces cracked, broken, or worn mounting points that allow rattling or improper part position
• Restores stable contact where a loose component causes intermittent operation or noise
• Fits a specific OEM location; use the part number to confirm exact application

• One replacement holder/mounting bracket

• Disconnect power and water before starting any repairs
• Inspect surrounding clips or fasteners and reuse or replace as needed—this part typically snaps or screws into place
• Handle plastic mounting parts gently to avoid cracking during installation

Top. 1 included. Front load