Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replace your washer door seal to stop leaks and prevent mold buildup. Essential when you notice water escaping or damage to the rubber. Verify fit by model.
Removed top of washer and lower front trim to access inner boot clamp, replaced boot and reassembled machine. Of coarse I cleaned every thing as I went. Read more
Secures the door boot seal to the washer front panel, preventing leaks. Replace if broken or when installing a new door seal for proper fit.
Fixing was easy and took approximately 1 hour. I have a Bosch Axxis washing machine and all parts came exactly as ordered and within 2 days of order. I had to take off front and top panel and the door switch. The new wire and spring was part of the order and I had to pay for it. The old parts looked fine to me and I could have reused them but since I had the new ones, I replaced them anyhow. I wish I would have the option to buy the rubber gasket only. Read more
The Carbon brush, drum motor is an OEM part for Bosch washing machines. These carbon brushes are responsible for transferring electrical current from the commutator on the motor to power the rotary movement inside the washing machine drum. Two come per package.
Symptoms of a bad carbon brush, or drum motor can include:
Causes of a bad part include normal wear and tear over extended use. As the brushes continuously contact the commutator, friction can cause them to wear down over time.
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
This is the second time this issue has come about. Bosch would tell you that you have a brushless motor. This is not true. If you get on youtube.com you can see how you can replace the brushes in your motor. Brush replacement. $50. New motor using a appliance repair man $500. Read more
Fix a washer that won't drain or hums during drain cycle. This drain pump removes water during wash cycles. DIY repair takes 20-90 minutes.
Replaced the drain pump assembly. Took about 90 minutes. Most difficult part was getting to the hoses and clamps in inside the machine at the bottom front. Just had to open the back panel and work inside. About the same difficulty as changing the radiator hoses on an automobile engine. Read more
Wire clamp spring that secures the door boot to the washer's front panel opening. Replace if broken, stretched, or missing to keep the seal properly seated.
Gray rear door panel forms the inner structure of your washer door assembly. Replace if cracked, warped, or broken to restore door integrity and support.
Usually when you 'find' what you're looking for and receive it, it's never the right model or something doesn't work just right - this arrived fast, was perfect, and flawless. I will always seek out AppliancePartsPros.com for my appliance needs! Read more
Replacement door hinge for front-load washers. Supports door weight and enables smooth opening/closing. Replace if cracked, broken, or causing door sag.
After years of replacing the female electric latch switch that controlled the operation of the machine, I discovered that the window/door's handle's connection to its male latching hook had failed. The two were no longer interconnected. Also, the window/door's frame and hinge were materially "fatigued" meaning the hinge/body assembly was allowing the window/door to sag - causing the misaligned door/window to machine body electric latch switch to break when the window/door was closed. Gaining... Read more
Fix a washer that won't spin or tumble clothes with a new drum drive motor. Solves drum rotation failure from worn motor windings and bearings.
By replacing the motor Read more
The Washer Filter-Fluff is an OEM replacement part for Bosch washing machines. It is a critical component responsible for capturing lint, debris, and other particles that may accumulate during the wash cycle, preventing them from clogging the drainage system or causing damage to the machine.
Over time, the accumulation of lint and debris can impede the filter's effectiveness, leading to drainage issues and reduced washing performance. Physical damage to the filter can also compromise its ability to capture lint properly.
Symptoms of a bad washer filter-fluff include:
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore washing machine models.
Bosch Axxis wasn't draining. Cleaned out filter and still didn't drain. There was also a whining noise when it was trying to drain. So I did some research and confirmed what I suspected. The drain pump had failed. Ordered a new pump and it arrived in two days. Replacement took a couple hours. Had to remove the back panel and front lower panel. Two hoses connected to the old pump had to be disconnected as did a power connection. Putting the new pump back in was just a matter of reconnecting... Read more
Door won't stay closed or washer won't start? A faulty door latch prevents secure closure and cycle operation. Simple DIY fix restores reliable function.
I entered my Bosch Washer's model number on AppliancePartsPros.com. The schematics on the web site were clear and very informative. From the schematics I found the exact parts I needed. From the schematics I figured out that the repair should be easy and that I can do the job by myself. Thank you AppliancePartsPros for building a website for people like me. Read more
This valve magnet is the solenoid actuator used to open and close a dishwasher water/control valve, restoring proper water flow for filling and cycle operation. It replaces a failed or weak magnet to help the valve respond correctly. What it does:
The repair is easy. Two screws in the back hold the top cover - once they are off you need to slide the cover back and it comes off. The valve is right there where the cold water hose is connected. Disconnect the control wires / clamp and slide back the wire clamps / remove the two rubber hosed / remove the old valve (it is snapped in place - look at the new one to understand the snap mechanism) / install the new valve. The repair takes less than 10 min. I tested and sure enough... now it... Read more
Replacement leveling foot supports and levels your washer for steady operation. Install this foot if yours is worn, cracked, or missing to restore balance.
Bought these when I attached the pedestal to the Vision dryer, which uses different feet. Read more
Fix a washer that won't spin or agitate with this drive belt. Connects the motor to the drum for proper rotation. DIY-friendly repair in about 1 hour.
Ordered parts and husband completed the repair within an hour of receiving parts. The machine now works just fine. Thank you for your service. Read more
Fix a washer that won't stop filling or overflows during cycles. This water valve magnet controls water flow during wash and rinse. Common DIY repair.
Replaced both water intake valves, most common failure, also replaced water level regular to be safe, it is 20+ years old. Great washer worth fixing, previous and first repair 3 years back was drain pump, belt still looked great Read more
Replace worn washer drum bearings to restore quiet operation and eliminate grinding, squealing, or wobbling. Supports drum shaft for smooth rotation. Verify fit with your model number before ordering.
The Lock-Electrical is an OEM part for Bosch washing machines. It serves as the latching mechanism that securely locks the washer door shut during active cycles. This locking component plays an important safety role by keeping the portal tightly closed while washing and spinning functions are underway.
Causes of a faulty lock-electrical can include wear from heavy use over time, water damage to internal electrical parts, or failed components governing the locking function.
Symptoms of a malfunctioning lock-electrical include:
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.