Wfw92hefco Parts

This touch-up paint restores small chips and scratches on painted appliance surfaces to improve appearance and slow corrosion. It's a simple cosmetic repair that helps appliances look cared-for between major services. What it does:

• Covers minor paint chips, nicks and surface scratches
• Helps restore a uniform finish on exterior panels and trim
• Reduces likelihood of surface rust where bare metal is exposed
• Ideal for spot repairs on visible areas without repainting large panels

• One touch-up paint item for appliance finish

• Work in a well-ventilated area and protect surrounding surfaces
• Shake well and test on an inconspicuous spot before applying
• Apply sparingly in thin coats; allow each coat to dry per product instructions
• Keep out of reach of children and away from open flame

Color: Chrome Shadow (Grey)

The Console is an OEM part for Whirlpool washing machines. It houses the control panel and electronic components that operate the washer. The console provides an interface for selecting cycles and options while shielding internal mechanisms.

Symptoms of a bad console can include cracks, impact damage, or faulty electronic components like non-responsive buttons. 

 Causes of a bad console include normal wear and tear over time, moisture intrusion leading to corroded electronics, and accidental mishandling.

Symptoms of a bad console include:

• Buttons that do not work or selections that do not register  
• Loose or damaged door or interface paneling
• Error codes or cycling issues due to wire or component damage

This Whirlpool replacement part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This small replacement clip secures a press (push) switch to the appliance control panel so the switch stays aligned and operates reliably. It restores proper button engagement and prevents the switch from working loose. What it does:

• Holds the press/push switch firmly in the control panel or console
• Keeps the switch aligned so button presses register correctly
• Helps stop intermittent or loose-feeling buttons caused by a failing retainer
• Prevents the switch from shifting or falling out during use

• Disconnect power before starting any repair to avoid shock or injury
• Access typically requires removing the control panel or console—retain screws and note their locations
• Clip installs by snapping into the panel and seating the switch; small pliers may help with alignment

This replacement trap sits in the dishwasher's sump/filtration area and captures larger food particles before they reach the pump. It helps maintain cleaning performance and reduce clogs that can lead to poor wash results or draining issues.

• Screens debris to protect the wash and drain pump
• Helps maintain proper water circulation and draining
• Damage or warping can let debris bypass the filter system
• Symptoms include poor cleaning, standing water, unusual grinding noises, or odors

• Disconnect power and shut off water supply before servicing
• Remove the lower rack; take out the lower spray arm and filters to access the trap
• Release the trap's locking tabs/fasteners, remove, and seat the new trap fully
• Reinstall filters and spray arm; run a short cycle to check for leaks and proper operation

This replacement seal restores a tight barrier between mating parts in your appliance, helping contain moisture at the joint. A fresh seal prevents leaks and supports proper performance when the original is worn, cracked, or compressed. What it does:

• Creates a moisture-tight seal between components to contain water at the connection
• Helps prevent drips, pooling, or seepage around the joint
• Replace if the seal is cracked, torn, flattened, deformed, or brittle
• Symptoms can include dampness at the joint, small leaks, or a loose fit

• 1 seal

• Disconnect power and shut off water supply before servicing
• Note the seal's orientation during removal to ensure correct placement
• Clean and dry mating surfaces; remove old residue or debris for a proper seal
• Seat the new seal evenly without twisting; verify full, uniform contact before reassembly

This rotor is the rotating core of the dishwasher's wash motor. Paired with the stator, it spins to drive water circulation through the spray arms, helping restore consistent spray action and cleaning performance.

• Works with the stator to create the magnetic rotation that powers the wash/circulation pump
• Failure can result in little or no spray action and poor cleaning results
• Can lead to intermittent wash or loss of circulation during the cycle

• Disconnect power and water supply before servicing
• Access the wash motor/sump from beneath the unit; removal from the cabinet may be required
• Remove the motor cover/retainer, pull the old rotor straight out, and fully seat the new rotor; handle magnet surfaces carefully
• Reassemble, restore connections, and run a short cycle to check for leaks and proper circulation

This replacement hose routes fluid or air within your appliance, providing a secure, leak-resistant path between components. A cracked, brittle, or kinked hose can cause leaks or performance issues—replacing it helps restore proper operation.

• Provides a sealed pathway for water or air between internal components
• Supports correct fill, circulation, draining, or pressure sensing as designed
• Prevents leaks at connections when properly clamped and routed
• Common symptoms: visible cracks or kinks, water leaks, standing water, or related fault/error codes

• Disconnect power; shut off the water supply
• Place towels or a pan to catch residual water before removal
• Note hose routing and clamp positions; take photos for reference
• Reuse or replace clamps as needed; secure connections and check for leaks after reassembly

Distribution lever replacement that operates the dispenser/linkage inside the appliance, restoring proper mechanical movement and reliable dispenser operation. Use when the original lever is cracked, worn, or no longer moves freely. What it does:

• Replaces the plastic lever that routes motion within the dispenser/distribution assembly.
• Helps the dispenser or internal linkage open and move correctly during cycles.
• Common symptoms: dispenser won't open, linkage binds or hangs, or inconsistent dispensing.
• Works with the existing mounting points and clips in the dispenser assembly.

• Disconnect power (unplug or shut off breaker) and water supply before starting any work.
• Remove the dispenser or access panel to reach the lever; take care with plastic clips and tabs—do not force them.
• Inspect and replace any worn clips, springs, or adjoining parts to ensure proper function.
• Test dispenser operation through a short cycle before reassembling panels.

This heater is the electric heating element that warms air or water so your appliance reaches the proper operating temperature. Replacing a failed heater restores normal heating performance and helps cycles finish correctly. What it does:

• Generates heat needed for normal drying or wash cycles
• Allows the appliance to reach and maintain operating temperature
• Common symptom: appliance runs but does not heat or takes much longer to finish
• Common symptom: cycles complete without expected temperature or sanitizing action

• One replacement heater element

• Turn power to the appliance off at the breaker before starting any repair
• Handle the element carefully to avoid bending or damaging terminals
• Follow the appliance service manual for panel removal and wiring re-connection

The Panel-Cntl (white) is an OEM component specifically designed for Whirlpool washing machines. As the control panel, it houses all the buttons, displays, and components that allow for machine operation and cycle selection. 

Causes of a bad control panel can include exposed circuitry due to cracks or breaks in the plastic housing, loose or faulty buttons, or a malfunctioning display. 

Symptoms of a bad control panel include:

• Unresponsive or non-functioning buttons 
• Blank or unintelligible display screen
• Inability to start or change cycles
• Erratic behavior such as random start/stop functions

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

Color: White

This stator is the stationary electrical component that works with the rotor to create the magnetic field needed for motor rotation, restoring proper motor function and helping appliances resume normal operation. What it does

• Generates the magnetic field that interacts with the rotor to drive the motor
• Replaces a worn or damaged stator that can cause humming or failure to spin
• Helps eliminate intermittent operation or reduced torque caused by stator faults
• Works as part of the motor assembly to support reliable appliance performance

• One stator assembly

• Disconnect power before servicing to avoid shock or injury
• Installation requires disassembly of the appliance motor housing
• Inspect rotor, bearings, and mounting hardware while replacing the stator