Wfw94he Parts

This replacement trap sits in the dishwasher's sump/filtration area and captures larger food particles before they reach the pump. It helps maintain cleaning performance and reduce clogs that can lead to poor wash results or draining issues.

• Screens debris to protect the wash and drain pump
• Helps maintain proper water circulation and draining
• Damage or warping can let debris bypass the filter system
• Symptoms include poor cleaning, standing water, unusual grinding noises, or odors

• Disconnect power and shut off water supply before servicing
• Remove the lower rack; take out the lower spray arm and filters to access the trap
• Release the trap's locking tabs/fasteners, remove, and seat the new trap fully
• Reinstall filters and spray arm; run a short cycle to check for leaks and proper operation

This replacement seal restores a tight barrier between mating parts in your appliance, helping contain moisture at the joint. A fresh seal prevents leaks and supports proper performance when the original is worn, cracked, or compressed. What it does:

• Creates a moisture-tight seal between components to contain water at the connection
• Helps prevent drips, pooling, or seepage around the joint
• Replace if the seal is cracked, torn, flattened, deformed, or brittle
• Symptoms can include dampness at the joint, small leaks, or a loose fit

• 1 seal

• Disconnect power and shut off water supply before servicing
• Note the seal's orientation during removal to ensure correct placement
• Clean and dry mating surfaces; remove old residue or debris for a proper seal
• Seat the new seal evenly without twisting; verify full, uniform contact before reassembly

This rotor is the rotating core of the dishwasher's wash motor. Paired with the stator, it spins to drive water circulation through the spray arms, helping restore consistent spray action and cleaning performance.

• Works with the stator to create the magnetic rotation that powers the wash/circulation pump
• Failure can result in little or no spray action and poor cleaning results
• Can lead to intermittent wash or loss of circulation during the cycle

• Disconnect power and water supply before servicing
• Access the wash motor/sump from beneath the unit; removal from the cabinet may be required
• Remove the motor cover/retainer, pull the old rotor straight out, and fully seat the new rotor; handle magnet surfaces carefully
• Reassemble, restore connections, and run a short cycle to check for leaks and proper circulation

Distribution lever replacement that operates the dispenser/linkage inside the appliance, restoring proper mechanical movement and reliable dispenser operation. Use when the original lever is cracked, worn, or no longer moves freely. What it does:

• Replaces the plastic lever that routes motion within the dispenser/distribution assembly.
• Helps the dispenser or internal linkage open and move correctly during cycles.
• Common symptoms: dispenser won't open, linkage binds or hangs, or inconsistent dispensing.
• Works with the existing mounting points and clips in the dispenser assembly.

• Disconnect power (unplug or shut off breaker) and water supply before starting any work.
• Remove the dispenser or access panel to reach the lever; take care with plastic clips and tabs—do not force them.
• Inspect and replace any worn clips, springs, or adjoining parts to ensure proper function.
• Test dispenser operation through a short cycle before reassembling panels.

This heater is the electric heating element that warms air or water so your appliance reaches the proper operating temperature. Replacing a failed heater restores normal heating performance and helps cycles finish correctly. What it does:

• Generates heat needed for normal drying or wash cycles
• Allows the appliance to reach and maintain operating temperature
• Common symptom: appliance runs but does not heat or takes much longer to finish
• Common symptom: cycles complete without expected temperature or sanitizing action

• One replacement heater element

• Turn power to the appliance off at the breaker before starting any repair
• Handle the element carefully to avoid bending or damaging terminals
• Follow the appliance service manual for panel removal and wiring re-connection

This replacement refrigerator water filter cartridge helps restore clear-tasting drinking water and ice by filtering particulate matter and common taste/odor causes. Designed to fit compatible Whirlpool refrigeration systems for reliable in-line filtration. What it does:

• Filters sediment and particulates to improve water clarity
• Reduces common taste and odor issues associated with aging filters
• Helps maintain ice quality by filtering water used for ice production
• Addresses symptoms like reduced water taste, cloudy ice, or off-odors

• Shut off water supply and relieve line pressure before removing the old filter
• Remove old cartridge per manufacturer instructions and insert the new filter until it seats securely
• Flush water lines and dispense water until it runs clear before use
• If you notice leaks or poor fit, re-seat the cartridge and check the filter housing for damage

This replacement cross-flow hose routes fluid/air between refrigerator components to restore normal operation and stop leaks or drainage issues. Durable black hose designed to match the original fit and function. What it does

• Routes condensate/drain or air between evaporator and drain areas to ensure proper flow
• Replaces cracked, split, or deteriorated hose that can cause leaks or pooling under the unit
• Helps prevent frost or moisture buildup when the original hose is blocked or damaged
• Restores correct drainage/flow where a worn hose caused poor performance or water on the floor

• One black cross flow hose

• Disconnect power to the appliance before starting any repair
• Drain water and remove any clips or clamps carefully to avoid damaging adjacent components
• Inspect and replace associated clamps or seals as needed for a secure, leak-free connection

The Harns-Wire is an OEM part for Whirlpool front-loading washing machines. 

Causes of a bad Harns-Wire can include wear from prolonged vibration during spin cycles. The wiring may crack or split over many years of use due to constant movement inside the chassis. 

Symptoms of a bad Harns-Wire include:

• Unexpected intermittent outages or failed cycles  
• Unbalanced loads resulting in excessive shaking
• An inability to properly fill or drain water
• Error codes indicating electronic control issues

This genuine Whirlpool replacement is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore as well. 

This shield is a protective cover that helps keep internal appliance components safe from heat, debris, and wear. Replacing a damaged shield restores protection to nearby parts and helps prevent further damage. What it does:

• Covers and protects internal components from debris, heat, and contact
• Helps prevent rubbing or chafing on wiring and nearby parts
• Reduces risk of heat-related damage when the original shield is warped or missing
• May stop rattling or vibration caused by a loose or broken shield

• Shield

• Disconnect power (and gas if applicable) before servicing
• Inspect the mounting area for damage or missing fasteners before installing
• Use the correct fasteners and alignment; do not force the shield into place