Wfw94hexwo Parts

The Vent Hose is an OEM part for Whirlpool washing machines. This vent hose allows air to circulate in and out of the washer, preventing pressure build-up and ensuring proper water drainage. It helps maintain the efficiency and effectiveness of the washing machine by facilitating the necessary airflow during the wash and spin cycles.

Common causes of a bad vent hose include wear and tear from regular use, blockages from lint or debris, and damage from mishandling or improper installation.

Symptoms of a bad vent hose include:

• Water not draining properly from the washer
• Unusual noises during the wash or spin cycles
• Leaks or water pooling around the washer
• Visible cracks, splits, or blockages in the hose

This OEM part is also compatible with some Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This is the pull-out dispenser drawer assembly for a washer. It holds and channels laundry products into the dispenser housing so each additive is released at the right time, restoring smooth operation and proper dispensing. What it does:

• Holds detergent and additives and directs them into the wash at the correct stage
• Restores smooth open/close action of a worn or broken drawer
• Helps resolve issues like detergent remaining in the drawer after a cycle
• Addresses leaks or drips from a cracked or warped dispenser drawer

• 1 dispenser drawer assembly

• Unplug the washer and turn off water supply before servicing
• Pull the old drawer out; depress the locking tab(s) to remove
• Transfer any reusable inserts/caps from the original drawer if applicable
• Slide the new drawer into the rails until it clicks; run a quick cycle to check for proper dispensing and leaks

A small metal hose clamp that secures flexible hoses and tubing to fittings to help prevent leaks and keep connections tight. Simple, durable replacement for worn or loose clamps on appliance water and drain lines. What it does:

• Holds a hose or tube firmly on a barb or fitting to prevent leaks or disconnection
• Resists loosening from vibration and normal use
• Restores a secure connection when an old clamp is corroded, stretched, or broken
• Helps prevent water damage from loose plumbing connections

• One metal hose clamp

• Disconnect power and shut off water supply before servicing
• Slide clamp over hose, position over fitting barb, then compress or tighten as required
• Replace any damaged hoses or fittings when installing a new clamp
• Verify a leak-free connection before returning appliance to service

This front panel assembly replaces a cracked, faded or damaged control panel and restores the appliance's appearance and function. It provides the mounting surface for controls and helps protect internal electronics from everyday wear. What it does:

• Houses and secures the control buttons/knobs and display area
• Protects underlying electronics from dust, spills and impact
• Restores a flush, finished look to the appliance front
• Helps resolve issues where the exterior panel is cracked, warped or cosmetically worn

• Disconnect power to the appliance before attempting any repair.
• Handle the panel carefully to avoid scratching or bending; some fasteners clip into place.
• Some disassembly of the console or trim may be required; keep track of screws and clips.

This counterweight is a replacement door balance weight that helps stabilize an appliance door for smoother, more controlled opening and closing. It restores proper door balance and reduces sagging or uneven movement. What it does:

• Adds counterbalance weight to a refrigerator/freezer door assembly for correct alignment
• Helps prevent door sag, slamming, or uneven closing that can compromise the seal
• Reduces strain on hinges and ensures doors operate smoothly
• Quietly stabilizes the door during normal use

• One counterweight

• Disconnect power and empty/remove door contents before starting
• Follow the appliance service manual for door removal/installation; some steps may require two people
• Use appropriate hand tools and avoid forcing parts; retain fasteners for reuse

Color: White. Size: 1 qt. can. Acrylic appliance paint.

This replacement hose clamp secures flexible water or drain hoses to fittings to help prevent leaks and keep connections tight. Durable metal construction provides reliable grip where hose-to-barb connections need fastening. What it does

• Secures a flexible hose to a barb or fitting to maintain a watertight connection
• Stops hose slippage that can cause leaks or intermittent water loss
• Helps stabilize hose routing to reduce chafing and wear
• Works on common appliance drain and supply hoses where a clamp is required

• One metal hose clamp

• Disconnect power and shut off water before servicing the appliance
• Position clamp over the hose barb and compress/turn as required using pliers or a screwdriver type matching the clamp style
• Tighten until snug—avoid over-tightening to prevent hose damage
• Inspect for leaks after restoring power and water

This wire harness routes power and signals between the appliance control and internal components, restoring reliable electrical connections for normal operation. It replaces a damaged or frayed harness to help resolve intermittent power or control issues. What it does:

• Provides the bundled wires and connector plugs that link the main control to motors, switches, sensors, and heating elements
• Restores broken or corroded connections that can cause intermittent operation or failure to start
• Helps address symptoms such as controls not responding, burners/heater not powering, or intermittent motor/pump operation
• Matches OEM connector groupings to ensure correct plug fit and routing when replacing the original harness

• 1 wire harness as shown

• Disconnect power (unplug or shut off breaker) before inspecting or replacing the harness
• Compare the replacement harness to the original to ensure connector types and wire routing before installing
• Secure harness routing away from heat sources and sharp edges; use existing clips or ties
• If you see burnt connectors or melted insulation, inspect surrounding components for underlying faults before restoring power