Wfw95hexw Parts

The Vent Hose is an OEM part for Whirlpool washing machines. This vent hose allows air to circulate in and out of the washer, preventing pressure build-up and ensuring proper water drainage. It helps maintain the efficiency and effectiveness of the washing machine by facilitating the necessary airflow during the wash and spin cycles.

Common causes of a bad vent hose include wear and tear from regular use, blockages from lint or debris, and damage from mishandling or improper installation.

Symptoms of a bad vent hose include:

• Water not draining properly from the washer
• Unusual noises during the wash or spin cycles
• Leaks or water pooling around the washer
• Visible cracks, splits, or blockages in the hose

This OEM part is also compatible with some Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This is a replacement washing machine control board. It acts as the washer's brain and controls functions like filling the drum, spinning, agitating, and emptying. It contains no moving components, but heat and moisture can cause corrosion. Soldered parts can also fail over time. Signs that the washing machine control board will need to be replaced include erratic operation, inaccurate operation, and failure to operate at all.Replacing the washing machine control board will first require unplugging the machine. Next, disassemble the upper control panel assembly. The control board is located on the right side, under the cowling. It is held in place with clips that must be released to extract the board. Make sure to gently disconnect the wiring harness and then connect it to the replacement board. Install the new control board and then reassemble the entire panel.This genuine OEM part is designed for Whirlpool, Roper, Estate, and KitchenAid branded washing machines. It is sold individually.

This funnel directs liquid fabric softener and bleach from the dispenser into the wash tub to ensure proper dispensing and reduce splashing. Fits into the washer dispenser assembly to restore correct chemical flow during cycles. What it does:

• Channels liquid fabric softener and liquid bleach from the dispenser to the wash tub
• Prevents splashing and spilling inside the dispenser area
• Helps ensure timed delivery of additives during the correct cycle
• Commonly replaced when the funnel is cracked, clogged, or missing

• One fabric softener and bleach fill funnel

• Disconnect power to the washer before servicing to avoid shock or injury
• Remove the dispenser or control console as required to access and snap the funnel into place
• Inspect surrounding dispenser components and gaskets; replace if damaged
• No special tools required for most installations.

A small metal hose clamp that secures flexible hoses and tubing to fittings to help prevent leaks and keep connections tight. Simple, durable replacement for worn or loose clamps on appliance water and drain lines. What it does:

• Holds a hose or tube firmly on a barb or fitting to prevent leaks or disconnection
• Resists loosening from vibration and normal use
• Restores a secure connection when an old clamp is corroded, stretched, or broken
• Helps prevent water damage from loose plumbing connections

• One metal hose clamp

• Disconnect power and shut off water supply before servicing
• Slide clamp over hose, position over fitting barb, then compress or tighten as required
• Replace any damaged hoses or fittings when installing a new clamp
• Verify a leak-free connection before returning appliance to service

This front panel assembly replaces a cracked, faded or damaged control panel and restores the appliance's appearance and function. It provides the mounting surface for controls and helps protect internal electronics from everyday wear. What it does:

• Houses and secures the control buttons/knobs and display area
• Protects underlying electronics from dust, spills and impact
• Restores a flush, finished look to the appliance front
• Helps resolve issues where the exterior panel is cracked, warped or cosmetically worn

• Disconnect power to the appliance before attempting any repair.
• Handle the panel carefully to avoid scratching or bending; some fasteners clip into place.
• Some disassembly of the console or trim may be required; keep track of screws and clips.

This counterweight is a replacement door balance weight that helps stabilize an appliance door for smoother, more controlled opening and closing. It restores proper door balance and reduces sagging or uneven movement. What it does:

• Adds counterbalance weight to a refrigerator/freezer door assembly for correct alignment
• Helps prevent door sag, slamming, or uneven closing that can compromise the seal
• Reduces strain on hinges and ensures doors operate smoothly
• Quietly stabilizes the door during normal use

• One counterweight

• Disconnect power and empty/remove door contents before starting
• Follow the appliance service manual for door removal/installation; some steps may require two people
• Use appropriate hand tools and avoid forcing parts; retain fasteners for reuse

Color: White. Size: 1 qt. can. Acrylic appliance paint.

This replacement hose clamp secures flexible water or drain hoses to fittings to help prevent leaks and keep connections tight. Durable metal construction provides reliable grip where hose-to-barb connections need fastening. What it does

• Secures a flexible hose to a barb or fitting to maintain a watertight connection
• Stops hose slippage that can cause leaks or intermittent water loss
• Helps stabilize hose routing to reduce chafing and wear
• Works on common appliance drain and supply hoses where a clamp is required

• One metal hose clamp

• Disconnect power and shut off water before servicing the appliance
• Position clamp over the hose barb and compress/turn as required using pliers or a screwdriver type matching the clamp style
• Tighten until snug—avoid over-tightening to prevent hose damage
• Inspect for leaks after restoring power and water

This wire harness routes power and signals between a appliance's control and components to restore electrical connections and reliable operation. It replaces a damaged or worn factory harness to help resolve power, control, or intermittent operation issues. What it does:

• Carries power and control signals between the control board and major components
• Restores lost connections caused by frayed, burnt, or broken wires
• Can stop intermittent operation or failure to start when the harness is damaged
• Prevents shorting and unintended behavior by replacing compromised wiring

• One complete wire harness assembly as shown

• Disconnect power (unplug appliance or shut off breaker) before starting any work
• Label or take photos of connector locations before removing the old harness to ensure correct reassembly
• Route wires away from sharp edges, moving parts, and heat sources; secure with existing clips or ties
• If wiring shows burn damage past the harness connectors, inspect associated components and terminals for underlying faults