Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Whdrr418g Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Knob Clip
Genuine Ge part
By: Ge
Part Number: WH01X10106

The Knob Clip is an OEM part for GE washing machines and dryers. This small but crucial component is designed to secure the control knob to the appliance's control panel.  

Over time, knob clips can wear out or break due to frequent use or accidental damage. When this happens, the control knob may become loose, fall off easily, or fail to engage the control panel properly, making it difficult to set the appliance to the desired cycle or function.

Symptoms of a bad Knob Clip include:

  • The control knob is loose or falls off the panel easily.
  • Difficulty in adjusting settings due to a loose knob.
  • The knob does not stay in place or slips when turned.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You I was unable to select a cycle knob wouldn't advance and stay   Tamara I. • Hatfield , PA • September 23, 2014

I actually called a repair service in our area. The serviceman asked questions and detected that I didn't need a timer unit but thought it was just a knob that was required. He offered to come out but the expense would be considerable. I am SO relieved that it was indeed the knob, and the dryer was fixed. In this time in our lives, every penny counts. I must applaud the serviceman for his honesty and dedication to his trade. He directed me to this website, but also added if there were any... Read more

More
Washer Top
Genuine Ge part
By: Ge
Part Number: WH44X21834

The Washer Top is an OEM part for GE washers. It is the upper panel that covers the internal components of the washing machine and provides a flat surface for loading and unloading laundry.

Causes of a bad Washer Top can include physical impact, warping due to prolonged exposure to heat or moisture, or general wear and tear over time.

Symptoms of a bad Washer Top include:

  • Visible cracks, dents, or damage to the top panel
  • Difficulty opening or closing the lid due to misalignment or warping
  • Water leaks around the top area during wash cycles
  • Excessive noise or vibration caused by a loose or damaged top

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You The lid and the top we’re both rusty and paint coming off.   Paul D. • Lilburn , GA • January 26, 2018

I bought and replaced the top and the lid for the washer. The washer now looks like a brand new washer even though it’s 12 years old. Total repair took less than an hour. Read more

More
Funnel Bleach
Genuine Ge part
By: Ge
Part Number: WH01X10057

 

Do-It-Yourself Stories from Customers like You Broken bleach funnel   Richard M. • Huntsville , AL • April 10, 2018

Took out the broken one and snapped the new one in , done. Read more

More
Drain Hose
Genuine Ge part
By: Ge
Part Number: WH41X374

The Drain Hose is an OEM part for GE washing machines. It is specifically designed to channel used water out of the washer and into the household drainage system. 

Causes of a bad drain hose can include physical damage from movement or installation, clogging from lint and debris, or degradation of the hose material over time, leading to leaks and inefficiency.

Symptoms of a bad Drain Hose include:

  • Water leaking from the back or underside of the washing machine
  • Pools of water around the area where the washing machine is installed
  • Signs of wear or damage to the hose, such as cracks, holes, or bulging

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Have water leak   Carl W. • Hopkins , MI • June 26, 2015

I did it Read more

More
Drive Motor
Genuine Ge part
By: Ge
Part Number: WH20X10093

This genuine OEM part is a drive motor for washers. The drive motor is the main engine that drives the washer tub allowing it to rotate and wash clothes effectively. If the washer is no longer spinning or the power has significantly decreased, it might be a sign that the drive motor needs to be replaced. Luckily, replacing this part is a relatively simple repair.To replace the drive motor, start by unplugging the washer. Once unplugged, move the washer away from the wall to gain access to the back panel. Uninstall the back panel by removing the screws that attach it. After removal, locate the drive motor and proceed to unthread the mounting screws holding it to the washer. Proceed to pull the old motor out of its place and install the new motor by threading the screws that secure it. This replacement part is sold individually and is compatible with GE, RCA, and Hotpoint brand washers.

Do-It-Yourself Stories from Customers like You GE washing machine slow spin cycle.   Pip L. • Great Falls , VA • September 22, 2021

This is an older top load GE washing machine we bought in 2008 that was spinning slowly but looked like it was agitating. The repair I did was in August 2021. I know nothing about washing machine repair and was able to repair the machine by reading summaries like this and watching the video. I checked Everything! Tried to reset the machine by unplugging, then plugging it back in and shutting the lid multiple times (more than 8). I checked the drain hose that had no clogs. Then learned about the... Read more

More
Washer Outer Tub Cover
Genuine Ge part
By: Ge
Part Number: WH49X21274

Outer tub cover that snaps over the washer's outer tub assembly. Replace if cracked, broken, or missing to restore proper clearance and protection.

Do-It-Yourself Stories from Customers like You Washer tub straps and part of cover tub broke   Edwin B. • Chicago , IL • October 13, 2014

I had to remove the front panel of the washing machine and top of the washing machine. i started by removing all the top screws as shown in one of videos. disconnected all the electrical wires (i have a commercial washer) and lifted the front panel over the back of the machine. i was then able to remove the top of the washing machine to give me access to the tub straps and the corresponding screws. i removed the broken straps and then was able to remove the tub cover by pushing down it down... Read more

More
Cord Power Asm
Genuine Ge part
By: Ge
Part Number: WH19X10068

 

More
Wireform Hinge (Long)
Genuine Ge part
By: Ge
Part Number: WH1X2743

 

More
Washer Shipping Bar
Genuine Ge part
By: Ge
Part Number: WH46X344

This shipping bar was installed during appliance transport to secure moving parts and prevent damage. It should be removed before first use to allow proper operation of your washer's door mechanism. Remove this bar if your washer door won't open properly or if you hear rattling noises during operation.

More
Clamp Tub Outlet
Genuine Ge part
By: Ge
Part Number: WH01X10134

 

More
Switch Rotary
Genuine Ge part
By: Ge
Part Number: WH12X10461

 

Do-It-Yourself Stories from Customers like You Temperature control on clothes washer   Jonnie R. • Long Valley , NJ • July 20, 2014

Replaced obvious defective part with purchased item. Read more

More
Switch Rotary
Genuine Ge part
By: Ge
Part Number: WH12X10499

 

Do-It-Yourself Stories from Customers like You Washing machine transmission leaking oil   Mary M. • Cross Lanes , WV • May 17, 2016

Replaced transmission, all seals, and dampers. It is a complicated, messy repair but costs much less than replacing the machine. This is the second tranny I have put in the 30 year old machine and now it works like new. Take the time to replace all seals if you do this repair. No use putting a new tranny in with old seals that will crack. Read more

More
Terminal Housing
Genuine Ge part
By: Ge
Part Number: WH12X497

Harness to corset & shifter

More
Terminal (12-Pack)
Genuine Ge part
By: Ge
Part Number: WD1X1434D

Includes 12 terminals.

Do-It-Yourself Stories from Customers like You Terminal receptacle was fried   Phillip M. • Indianapolis , IN • May 12, 2015

I had to replace the 3 terminals and try to put them in the new terminal receptacle. I replaced the lid switch because I broke the old one trying to diagnose the problem. I found the helpful video on this site after I had already started. Read more

More
Pressure Switch
Genuine Ge part
By: Ge
Part Number: WH12X10069

 

Do-It-Yourself Stories from Customers like You Water would not stopping running in washing machine   Herbert C. • Stem , NC • October 26, 2014

Searched online what could be causing the problem after mopping water for a good 30 minutes. Chatted online with a specialist at Appliance Parts Pros. After trying several things by process of elimination I was advised that the problem was more than likely the water level switch. Ordered the part. It arrived in 2 days. Installed the switch which took less than 10 minutes and now my machine is as good as new. Thank You Appliance Pros. Read more

More
Self Locking Strain Relf
Genuine Ge part
By: Ge
Part Number: WH12X10208

 

More
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google