Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Whdrsr315d5ww Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Drive Motor
Genuine Ge part
By: Ge
Part Number: WH20X10093

This genuine OEM part is a drive motor for washers. The drive motor is the main engine that drives the washer tub allowing it to rotate and wash clothes effectively. If the washer is no longer spinning or the power has significantly decreased, it might be a sign that the drive motor needs to be replaced. Luckily, replacing this part is a relatively simple repair.To replace the drive motor, start by unplugging the washer. Once unplugged, move the washer away from the wall to gain access to the back panel. Uninstall the back panel by removing the screws that attach it. After removal, locate the drive motor and proceed to unthread the mounting screws holding it to the washer. Proceed to pull the old motor out of its place and install the new motor by threading the screws that secure it. This replacement part is sold individually and is compatible with GE, RCA, and Hotpoint brand washers.

Do-It-Yourself Stories from Customers like You Filled up and ran through cycle but would not agitate or spin   David R. • Ada , OH • July 04, 2014

New motor. The motor was ok, but the control board mounted on the motor wasn't. Can't buy to control board separate from the motor. Easy to replace the motor, but not so easy to troubleshoot to make sure the problem was the motor and not something else. Read more

More
Washer Outer Tub Cover
Genuine Ge part
By: Ge
Part Number: WH49X21274

Outer tub cover that snaps over the washer's outer tub assembly. Replace if cracked, broken, or missing to restore proper clearance and protection.

Do-It-Yourself Stories from Customers like You Washer tub straps and part of cover tub broke   Edwin B. • Chicago , IL • October 13, 2014

I had to remove the front panel of the washing machine and top of the washing machine. i started by removing all the top screws as shown in one of videos. disconnected all the electrical wires (i have a commercial washer) and lifted the front panel over the back of the machine. i was then able to remove the top of the washing machine to give me access to the tub straps and the corresponding screws. i removed the broken straps and then was able to remove the tub cover by pushing down it down... Read more

More
Washer Lid Switch Assembly
Genuine Ge part
By: Ge
Part Number: WH12X10333

If your washer won't start or stops mid-cycle, this lid switch assembly detects lid closure to restore safety interlock. DIY-friendly, installs in 15 minutes.

Do-It-Yourself Stories from Customers like You The washer would fill up then turn itself off push the start button they water would drain from the washer and start all over again this time it would work fine   Michael F. • Union , NJ • December 12, 2015

I went on line and found out that the problem could be the lid switch.You tube gave you step by step instruction on how to change the lid switch.I am mechanicially handy.I order the switch from appliance parts pro.the switch was exactly what I ordered .The switch was in my hands in two days.Merry Christmas to all the help at Appliance Pros Read more

More
Cord Power Asm
Genuine Ge part
By: Ge
Part Number: WH19X10068

 

More
Wireform Hinge (Long)
Genuine Ge part
By: Ge
Part Number: WH1X2743

 

More
Washer Shipping Bar
Genuine Ge part
By: Ge
Part Number: WH46X344

This shipping bar was installed during appliance transport to secure moving parts and prevent damage. It should be removed before first use to allow proper operation of your washer's door mechanism. Remove this bar if your washer door won't open properly or if you hear rattling noises during operation.

More
Magnet Housing Asm
Genuine Ge part
By: Ge
Part Number: WH01X10222

 

Do-It-Yourself Stories from Customers like You Intermittent no spin. The rubber tub isolators broke.   Michael M. • Baldwinsville , NY • July 18, 2023

I removed and inspected the lid magnet. It had a 1/8" layer of corrosion. I removed the layer of corrosion and reinstalled the part. the symptom improved. That was a stop-gap repair until the new lid magnet arrived. The broken rubber isolators were discovered when I removed the top of the washing machine. Read more

More
Clamp Tub Outlet
Genuine Ge part
By: Ge
Part Number: WH01X10134

 

More
Switch Rotary
Genuine Ge part
By: Ge
Part Number: WH12X10461

 

Do-It-Yourself Stories from Customers like You Temperature control on clothes washer   Jonnie R. • Long Valley , NJ • July 20, 2014

Replaced obvious defective part with purchased item. Read more

More
Switch Rotary
Genuine Ge part
By: Ge
Part Number: WH12X10499

 

Do-It-Yourself Stories from Customers like You Washing machine transmission leaking oil   Mary M. • Cross Lanes , WV • May 17, 2016

Replaced transmission, all seals, and dampers. It is a complicated, messy repair but costs much less than replacing the machine. This is the second tranny I have put in the 30 year old machine and now it works like new. Take the time to replace all seals if you do this repair. No use putting a new tranny in with old seals that will crack. Read more

More
Terminal Housing
Genuine Ge part
By: Ge
Part Number: WH12X497

Harness to corset & shifter

More
Terminal (12-Pack)
Genuine Ge part
By: Ge
Part Number: WD1X1434D

Includes 12 terminals.

Do-It-Yourself Stories from Customers like You Terminal receptacle was fried   Phillip M. • Indianapolis , IN • May 12, 2015

I had to replace the 3 terminals and try to put them in the new terminal receptacle. I replaced the lid switch because I broke the old one trying to diagnose the problem. I found the helpful video on this site after I had already started. Read more

More
Pressure Switch
Genuine Ge part
By: Ge
Part Number: WH12X10069

 

Do-It-Yourself Stories from Customers like You Water would not stopping running in washing machine   Herbert C. • Stem , NC • October 26, 2014

Searched online what could be causing the problem after mopping water for a good 30 minutes. Chatted online with a specialist at Appliance Parts Pros. After trying several things by process of elimination I was advised that the problem was more than likely the water level switch. Ordered the part. It arrived in 2 days. Installed the switch which took less than 10 minutes and now my machine is as good as new. Thank You Appliance Pros. Read more

More
Switch Pressure
Genuine Ge part
By: Ge
Part Number: WH12X10108

 

Do-It-Yourself Stories from Customers like You Water in flow would not stop on fill or rinse, also not consistently draining during rinse cycle   Bryan B. • Chantilly , VA • July 16, 2019

AppliancePartsPros had the problem areas for my washer model. I clicked on the appropriate one and viewed the comments, solutions and install videos. The videos are great! Not knowing which part might be bad, I purchased the recommend solution parts. The first two solved the problem and I returned the unneeded third part through the simple returns process. The returns process did ask a question about the part model and serial number which was not on the box and would not let me go forward... Read more

More
Self Locking Strain Relf
Genuine Ge part
By: Ge
Part Number: WH12X10208

 

More
Relay
Genuine Ge part
By: Ge
Part Number: WH12X10213

 

More
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google