Wm8100ha Parts

This lifter is a replacement drawer support that helps hold and guide a refrigerator/freezer drawer for smooth, even operation. Restores proper alignment and reduces sticking or uneven movement. What it does:

• Supports and stabilizes a sliding drawer so it opens and closes smoothly
• Helps maintain proper drawer alignment and load distribution
• Worn or broken lifters can cause sagging, binding, or uneven drawer movement
• Replaces damaged or missing lifter hardware to restore normal drawer function

• Disconnect power and empty the drawer before starting any repair
• Remove the drawer or access panel per your model's service instructions to reach the lifter
• Install the new lifter in the same orientation and secure any retaining clips or screws; do not force parts into place
• If fasteners or adjacent guides are damaged, replace them as well for a secure fit

This protective cover shields internal components and wiring from dirt, moisture and accidental contact, helping keep the appliance safe and functioning properly. It's a small replacement panel that restores the appliance's factory protection. What it does:

• Covers and protects internal parts and wiring from debris and accidental impact
• Prevents loose components from rattling or shifting during operation
• Helps maintain proper spacing and alignment of nearby panels and clips
• Addresses symptoms like visible damage, missing cover, exposed wiring, or unusual noise from loose trim

• Disconnect power before starting any repair to avoid shock or injury
• Typically secures with clips or a few screws; use basic hand tools and take care not to strip fasteners
• Inspect mounting tabs and surrounding trim for damage; replace any broken clips before reassembly

This display power control board assembly provides the electronics and connectors that power and control the appliance display and touch/LED indicators, restoring user interface responsiveness and readouts. What it does:

• Supplies power to the front display and LED indicators so the control panel lights and information appear
• Routes signals between the main control board and display module to enable button/touch response
• Helps address a blank or dark display, dim/flickering display lights, or unresponsive touch/soft keys
• Works as a direct replacement for a damaged or failed display/control board assembly

• Disconnect power to the appliance before attempting any service to avoid shock or injury
• Handle the board by the edges and avoid touching components; use anti-static precautions if available
• Access typically requires removing the control console or front panel; keep track of screws and connectors

A replacement holder assembly that secures and supports internal components for proper alignment and operation. Restores stable mounting where the original bracket is cracked, bent, or broken so the appliance runs quietly and reliably. What it does

• Provides a secure mounting point for internal parts that rely on a fixed support
• Prevents rubbing, misalignment, and excess vibration caused by a damaged holder
• Helps restore correct component positioning to improve part interaction and operation
• Commonly used when the original bracket is cracked, worn, or no longer holds parts firmly

• One holder assembly

• Disconnect power before starting any repair; shut off water supply if the repair requires opening plumbing
• Basic hand tools typically required; handle clips and tabs gently to avoid damage
• Inspect adjacent components for wear and replace if needed for a long-lasting repair

The stator assembly is the stationary coil of your washer's direct-drive motor. It generates the magnetic field that spins and agitates the basket, helping restore proper movement when the original winding is worn or failed. What it does:

• Produces the electromagnetic field that drives the rotor and basket
• Common fix for no-spin, no-agitate, or weak/intermittent motor performance
• Helps restore smooth, consistent basket speed and torque

• One stator assembly

• Disconnect power and ensure stable access to the appliance before starting
• Access the motor from the bottom or rear; remove the rotor cap/center bolt and rotor before the stator
• Handle the rotor's strong magnets with care; support the tub and keep fingers clear
• Reconnect wiring harnesses fully seated and route as original; tighten mounting bolts evenly

This replacement connector hose routes water between the refrigerator water valve and the dispenser or ice maker, restoring reliable water flow and helping prevent leaks. It's a direct-fit service part used where the factory hose is worn or damaged. What it does

• Connects the refrigerator water valve to the dispenser or ice maker, providing a sealed water path.
• Restores proper water and ice delivery when a cracked or leaking hose causes reduced flow or pooling.
• Helps prevent leaks by replacing brittle, cracked, or split tubing and fittings.
• Works with the original fittings and routing used by the manufacturer for a secure connection.

• One replacement connector hose.

• Turn off and disconnect the refrigerator's water supply and power before starting.
• Verify orientation and routing match the original hose; avoid sharp bends or kinks.
• Tighten fittings securely but avoid over-tightening; inspect for leaks after reconnecting water.

This hose connector attaches the appliance's water hose to the inlet, restoring a secure, leak-free water connection. Use it to replace a cracked, brittle, or leaking connector and get reliable water flow back to the appliance. What it does:

• Connects the supply hose to the appliance water inlet to allow proper water flow
• Replaces damaged or worn connectors that can cause visible leaks
• Addresses symptoms like leaks at the hose connection, intermittent filling, or reduced water flow
• Provides a direct, OEM-style replacement when the original connector fails

• Turn off the water supply and disconnect power before starting
• Inspect and replace any worn O-rings or seals; use only parts specified for your model
• Hand-start threads to avoid cross-threading, then tighten securely; test for leaks after installation

This inlet hose connects the home water supply to the washer's fill valve to allow proper water flow during cycles. Replacing a damaged inlet hose restores reliable filling and helps prevent leaks and water damage. What it does:

• Carries cold (or hot, depending on installation) water from the household supply to the washer fill valve.
• Stops leaks caused by cracked, split, or deteriorated hose material at the supply or machine connection.
• Resolves slow or no-fill symptoms when a damaged hose is restricting water flow.
• Helps prevent water pooling and floor damage from failing or loose inlet connections.

• One inlet hose assembly

• Turn off both the home's water supply and the appliance power before replacing the hose.
• Drain remaining water from the old hose and fittings, then disconnect fittings carefully to avoid spills.
• Hand-tighten connections, then give an additional quarter turn with a wrench—do not overtighten.
• Inspect fittings and replace any damaged washers or gaskets; check for leaks after reconnecting.

This cover cap is a small trim piece that restores a finished appearance and protects exposed fasteners on the appliance. It hides mounting hardware and helps keep dust and moisture out of seams for a cleaner look. What it does:

• Covers and protects exposed screws or fasteners to improve appearance
• Helps prevent dirt and debris from entering small openings around the fastener
• Reduces direct moisture contact with metal fasteners to slow corrosion
• Restores a finished, uniform look to damaged or missing trim areas

• Disconnect power and water before servicing the appliance.
• Typically snaps into place; use a flat tool carefully to pry out the old cap if needed.
• Align tabs and press firmly until the cap clicks into position; avoid forcing to prevent breakage.
• Inspect surrounding trim for damage and replace the cap if cracked or deformed.

This inlet hose delivers water from your home's supply to the appliance, restoring proper fill and water flow. It replaces a damaged, cracked, or leaking inlet line to help stop leaks and restore normal filling. What it does:

• Guides incoming water from the household supply to the appliance's fill system
• Replaces hoses that are cracked, split, or leaking at connections
• Helps resolve slow or no-fill symptoms caused by a damaged supply line
• Restores a secure connection at the appliance inlet to prevent water damage

• Turn off the water supply and unplug the appliance before starting
• Inspect fittings and seals; replace washers if worn to ensure a tight seal
• Hand-start threaded fittings, then snug with a wrench—avoid over-tightening
• Check for leaks after reconnecting water and restoring power

This hose connector attaches a refrigerator water line securely to the appliance to maintain a sealed water supply for the dispenser and ice maker. Replaces a cracked or worn connector to stop leaks and restore proper water flow. What it does:

• Joins the refrigerator water line to the inlet fitting, creating a watertight connection
• Prevents leaks and dripping at the hose junction
• Restores steady water flow to the dispenser and ice maker when a damaged connector is replaced
• Helps eliminate moisture or puddling under or behind the appliance caused by a failed connector

• Turn off the water supply and unplug the appliance before replacing the connector
• Drain any residual water from the line to reduce spills during removal
• Use appropriate tools to avoid over-tightening; confirm all fittings are snug and leak-free after installation

This inner door frame is the molded liner that supports shelves and seals inside the refrigerator/freezer door, restoring structural fit and appearance. Replacing a damaged inner frame helps shelves mount securely and keeps the door assembly stable. What it does:

• Replaces a cracked, warped, or broken inner door liner that no longer supports door components
• Restores proper alignment and mounting points for door shelves and bins
• Helps maintain the door's internal structure so seals and components sit correctly
• Addresses symptoms like visible cracks, loose or sagging shelves, and a rattling or unstable door interior

• One door inner frame / inner liner

• Disconnect power to the appliance and empty the door before starting
• Remove door shelves and fasteners to access the inner frame; support the door while working
• Use common hand tools; follow OEM service instructions if available
• Inspect door seals and mounting hardware during reassembly; do not overtighten fasteners