Wmh32519 Parts

Color: Black (Qty of 1)

This grill vent is the front vent trim that channels heat and smoke away from the cooktop and oven cavity, keeping internal components protected and helping your range vent properly during broiling and baking. What it does:

• Directs exhaust and heat away from the oven cavity to help maintain proper airflow.
• Protects underlying components and internal wiring from direct heat and food debris.
• Replacing a damaged vent can reduce smoke buildup and improve overall oven performance.

• Disconnect power to the appliance (and gas if applicable) before starting any work.
• Use care handling edges; trim pieces can be sharp.
• Removal/installation typically involves removing fasteners or clips—keep hardware handy for reassembly.

The Interlock is an OEM component specifically designed for Whirlpool microwaves. Located inside the door assembly, the interlock provides a safety function that prevents microwave energy from emitting when the door is opened. 

Composed of a magnet and lever switch beneath a metal shield, the interlock uses electromagnetic principles to immediately turn off microwave power if the door is opened during a cook cycle. This ensures safe access to hot food inside the cavity.

Causes of a bad interlock include worn contacts or weakening of the magnetic mechanism from sustained use over time. Physical damage or debris interfering with smooth lever operation are also possible causes.

Symptoms of a bad interlock include: 

• Microwave emission even with door slightly ajar  
• Faulty “door open” detection during cooking
• Inability to start new cycles until manually reset

This OEM part fits kitchen microwaves from Whirlpool, KitchenAid, Jenn-Air, and select Kenmore models.

This molded wire support clip secures wiring and small harnesses to the appliance cabinet or components to prevent rubbing, pinching, or contact with moving/heat-producing parts. It helps reduce chafing and electrical wear for safer, more reliable operation. What it does:

• Holds wiring harnesses and individual wires in place to prevent contact with sharp edges, motors, or heating elements
• Minimizes wire movement and vibration that can lead to chafing or broken conductors
• Helps maintain proper routing for consistent connections and component performance
• Commonly used where a small push-fit retainer is needed to secure low-voltage or signal wires

• One wire support clip as shown

• Disconnect power to the appliance before servicing to avoid shock or injury
• Push-fit installation: align clip over wire/harness and press into the mating hole or slot until it snaps in place; clip may require slight flexing
• Inspect surrounding wiring and routing for damage; replace any frayed or exposed wires before reassembly
• If the mounting hole or panel is damaged, use the correct replacement panel or a suitable repair to ensure a secure fit

This outer wrapping assembly is the coated black outer layer that fits around the dryer drum to protect the drum and improve airflow. It restores proper drum coverage and helps reduce rubbing, noise, and fabric snags. What it does:

• Replaces worn or damaged drum outer wrap that can cause rubbing or scraping noises
• Provides a smooth, protective surface that helps prevent clothes from catching on rough drum edges
• Helps maintain proper drum clearance and airflow for consistent drying performance
• Restores the dryer's appearance with a black, coated finish

• Disconnect power (and gas supply if applicable) before beginning any repair
• Access the drum per the dryer's service instructions; remove the drum to replace the outer wrapping
• Handle edges carefully and use gloves to avoid cuts; align the wrap evenly before securing

This thermistor is a refrigerator temperature sensor that monitors internal air temperature so the control board can regulate cooling. Replaces a failed sensor to help restore accurate temperature readings and more consistent cooling. What it does:

• Senses internal refrigerator temperature and sends a variable resistance signal to the control board
• Helps the control system cycle the compressor and fans correctly for stable temperatures
• Commonly replaced when refrigerator runs too cold, too warm, or has irregular cooling cycles
• Can address temperature-error codes or defrost control issues when the sensor is faulty

• Disconnect power to the appliance before inspecting or replacing the sensor
• Handle the sensor and wiring harness carefully to avoid damage to the probe or connectors
• Install in the original sensor mounting location and secure wiring away from moving parts

This base is the appliance's lower cabinet section that supports internal components and helps stabilize the unit. It restores a solid foundation so the appliance sits level and protects internal parts from floor contact and debris. What it does:

• Provides structural support for the appliance's internal assemblies and controls
• Helps stabilize the unit and reduce excessive vibration or rocking
• Protects wiring, motors and other components from contact with the floor
• A damaged or cracked base can cause noisy operation, misalignment, or uneven sitting

• Disconnect power (and gas if applicable) before beginning any repair
• Follow the OEM service manual for disassembly and reassembly steps
• Replacement may require removing the cabinet and/or drum; having a second person helps with lifting and alignment
• Inspect and reuse original fasteners only if undamaged; replace any worn mounting hardware

This replacement door handle restores a secure grip and clean appearance to your refrigerator door. It matches the original mounting points for a direct-fit swap and helps you open and close the door smoothly. What it does:

• Provides a sturdy, ergonomic grip for opening and closing the refrigerator door
• Replaces damaged, cracked, or loose handles to restore safe operation
• Matches original mounting locations to maintain proper door alignment and function
• Designed for direct replacement without modifying the door

• One replacement refrigerator door handle

• Remove power to the appliance and empty door shelves before starting
• Typical install requires removing the door trim or screws at the handle mounting points
• Handle screws and any trim clips should be reused if undamaged; replace if stripped

This control panel is the front console assembly that lets you operate your range/oven and view status. It restores button and display control so you can set cook modes, temperatures, timers, and clock functions. What it does:

• Provides the touchpad/buttons and display area used to select oven functions, temperature and timers
• Sends user inputs to the oven control so bake, broil, self-clean and timer commands register
• Replaces panels that have cracked buttons, faded labeling, or an unresponsive touchpad
• Can resolve display/backlight issues or intermittent command loss linked to a damaged console

• Disconnect power at the breaker before removing the old console to avoid shock
• Handle carefully to avoid scratching the finish or damaging attached wiring/contacts
• May require removing trim screws and unplugging a wire harness; save fasteners for reassembly

This replacement refrigerator water filter helps reduce common taste and odor issues so your drinking water and ice taste cleaner. Designed to install in compatible fridge filter housings for straightforward refreshes. What it does:

• Filters water to reduce chlorine taste and odor commonly noticed in drinking water and ice
• Helps improve clarity and flavor of ice and dispensed water
• Can resolve symptoms like unpleasant or metallic taste, cloudy ice, or stale-smelling water
• Works as a direct-replacement cartridge in compatible refrigerator filter housings

• Turn off water supply or dispenser per your refrigerator's instructions before replacing the filter
• Remove old filter per manufacturer directions and insert the replacement until it seats and locks
• Flush system by running several cups of water through the dispenser to clear air and loose carbon particles
• Follow the refrigerator manufacturer's replacement schedule and disposal guidance for used filters

This wire harness is the assembled wiring needed to replace a worn, damaged, or failed harness that connects appliance components and restores reliable power and signal paths. It helps return normal operation by replacing frayed or broken wires and connectors. What it does:

• Replaces the factory wiring assembly that links controls, switches, sensors and motors
• Restores electrical connections that can cause no-start, intermittent operation, or failed cycles
• Eliminates problems caused by loose, corroded, or damaged wires and terminals
• Prevents arcing or shorts from exposed or broken conductors when properly installed

• One complete wire harness assembly as shown

• Always disconnect power (unplug or shut off breaker) before servicing electrical components
• Verify routing and connector orientation match the original harness before securing
• Avoid stretching or pinching wires; secure with existing clips or fasteners
• If any connector or terminal appears damaged, replace the harness rather than attempt field repairs

This transformer provides the low-voltage power needed by the appliance's control and user-interface circuits so systems like the dispenser, ice maker, or control board can operate reliably. What it does:

• Steps down mains power to low-voltage power for control boards and user-interface components
• Restores power to dispensers, ice makers, timers or control modules that have lost low-voltage supply
• Commonly replaced when control circuits are unresponsive, displays are blank, or dispenser functions fail
• Matches OEM function for direct replacement of the failed transformer

• One replacement transformer

• Disconnect all power to the appliance before starting work to avoid shock hazard
• Handle wiring connections carefully; make secure electrical connections and restore grounding

This replacement light bulb restores clear, reliable illumination so you can see inside your appliance during use. It's a quick fix when the original lamp has burned out, gone dim, or started to flicker. What it does:

• Provides light in the appliance's designated lamp location
• Restores visibility for monitoring food and settings
• Common fix for no light, dim light, or intermittent/flickering light
• Helps address broken or blackened/burned-out bulbs

• 1 light bulb

• Disconnect power before servicing and allow the area/bulb to cool completely
• Remove any lens or cover as designed for your model; retain screws/clips
• Handle the bulb with clean, dry hands or gloves and do not overtighten
• Check the switch, socket, and wiring on the unit