Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Microwave has no power or won't heat? A blown thermal fuse is often the cause. This safety part protects against overheating. DIY repair in 30 minutes.
It is difficult (if not impossible) to remove the electronic switches from the hard plastic latches. I replaced all three switches and both the upper and lower latches I also replaced the main 20 amp ceramic fuse which blew out when the latch/switches failed. Read more
Air damper assembly for over-the-range microwaves. Installs at top exhaust opening to control airflow direction. Replace if cracked, missing, or broken.
Bought a new home with microwave venting into kitchen. Ordered damper assembly needed to vent through the wall to the outside. Removed microwave, followed directions in original installation instructions, turned fan over, cut hole in wall, installed wall cap and replaced oven. Problem solved. Read more
Microwave won't heat but hums loudly? The diode regulates power to the magnetron. Test with multimeter—reads one direction only. Moderate DIY repair.
Replacing a magnetron in my particular 9-year-old microwave (a microwave/hood combination) was not a simple “plug & play” operation. That is why I am placing this in the slightly difficult area. First, it takes 2 people to remove the microwave from the top of the stove. Next the main outer panel need to be removed. After that, 2 sheet metal panels need to be removed in order to expose the high voltage components for testing. Always discharge the high voltage capacitor first before doing... Read more
Microwave not heating or making loud humming noise? The high-voltage capacitor supplies power to the magnetron. DIY repair in under an hour.
I ordered a new magnetron and a new capacitor and after they arrived I set to work. I took plenty of pictures with my phone to remind me how the components came apart but it was pretty straight forward. Once the new parts were in and everything was reassembled the microwave worked good as new. The repair was less than a third the cost of replacement and no special tools are required. Just be careful to discharge the capacitor. This website is a great resource. Read more
Color: Grey
The grill vent is only held in place by two screws. Super simple fix. Remove the two screws and the old grill vent, position the new vent and put the two screws back in. Replacing the cord required that cabinet to be removed. Lots of screws on the back, top and bottom. Once the screws were removed, the cabinet pulled back. The power cord connections were then clearly visible. Undid the two wire connectors and unscrewed the ground wire from the body to remove the old power cable. Installed the... Read more
Fixes cracked or damaged front console, restores button function and finished appearance. Direct replacement for built-in microwave control panels.
This replaceable refrigerator water filter cartridge helps restore clear, better-tasting drinking water and ice by capturing sediment and common impurities. Designed for a quick swap to keep your fridge dispensing clean water. What it does:
Metal support bracket that secures internal microwave components. Replace if your original mounting plate is bent, broken, or missing to restore stability.
Secures internal components to your microwave chassis. Replace this mounting bracket if it's cracked, broken, or missing to properly anchor parts.
Fix loose or vibrating microwave with this hard-mount bracket. Secures microwave to cabinet, eliminating rattling noise and restoring stable alignment.
Fix a microwave that won't heat or runs inconsistently. This temperature sensor monitors internal heat levels to regulate cooking performance.
This oven temperature sensor senses cooking cavity heat and sends accurate temperature readings to the range control so your oven can reach and maintain set cooking temperatures. Replaces a failed or intermittent sensor for consistent performance. What it does:
The Fixed thermostat is an OEM component specifically designed for Whirlpool microwaves. This part plays an important role in regulating the internal cavity temperature during the cooking cycle. Symptoms of a bad Thermost-Fix include:
Causes of a bad Thermost-Fix can include failure or damage of internal thermostatic components or sensors, electrical issues preventing proper communication, or obstructions interfering with temperature monitoring. This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Wire harness for built-in microwaves. Connects internal electrical components. Replace if wires are damaged, frayed, burnt, or connectors are broken.
Wire harness for built-in microwaves. Connects internal electrical components. Replace if wires are frayed, damaged, or connections are loose or broken.
Complete vent cladding, door, and base assembly for built-in microwaves. Replaces cracked, damaged, or missing exterior panels and components.