Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Size: 8 x 1/2 ab.
Removed the handle with two screws on the inside front and pulled out the custom wood panel. Pulled the compactor out from under cabinet. Tipped it over on back of unit, supporting it with a little foot stool. Unscrewed two lower screws at bottom of unit holding black trim panel (that held wood panel in place) and lower black rubber flap. Removed two screws on lower outside side of unit that held the foot pedal. Slid off black U shaped metal frame from top of compactor towards bottom. Slid on... Read more
This freezer door shelf trim is the integrated retaining rail that secures items on the door bin. Replacing a cracked or missing rail restores a snug, reliable hold and keeps your freezer door storage tidy and usable.
Installed, easy peasy... Read more
The Shelf Stud is an OEM part for Whirlpool refrigerators. It serves as a support peg that holds the refrigerator shelves in place, ensuring they remain stable and properly positioned.
Causes of a bad shelf stud can include wear and tear from regular use, accidental impact that causes the stud to break, or repeated removal and reinstallation of shelves leading to loosening or damage.
Symptoms of a bad shelf stud include:
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This is a rear stud with a screw. For the front stud with screw use part number W11223328. For studs with no screw use kit part number 4388538.
Myself Read more
This black dispenser grille fits at the base of the refrigerator's ice/water dispenser. It provides a clean, finished surface over the dispenser well and helps catch minor drips when the original grille is cracked, stained, loose, or missing.
Put the Grille in place. Easy fix. Read more
This cam-door is the small pivoting cam that helps a washer/dryer or laundry door latch and swing smoothly. Replacing a worn or broken cam restores proper door movement and helps the door close and seal reliably. What it does:
Replaced both sets of door cams on my Kenmore Elite Refrigerator. The most important thing to know is that you DO NOT have to remove the doors from the refrigerator to replace BOTH sets of cams. You just have to remove the lower grill which is a snap fit (I also turned off the water and unplugged the unit). My fridge has an ice and water dispenser where the water and electrical lines go through the cams on the left side. Be sure to order the correct parts as the cam holes on the freezer side... Read more
Clip for bottom grill. If your original clip is riveted, order screw WP489478.
I had to remove a metal panel at the bottom back of the freezer as well as a couple of shelf slides in order to get at a drain pan in the back. It was frozen solid, so I stabbed at it with an ice pick until I broke through, followed up by poking a coat hanger in the drain hole to clear as much as I could, then poured a little boiling water over it to follow up. After screwing it all back together, the ice maker surprisingly was working again in less than 20 minutes. I also replaced a broken... Read more
Mounts on the bottom of the freezer door.
Note: Right Hand Roller
Lifted refrigerator in front and back. Removed roller pin holding assembly. Removed defective assembly and replaced with new. Read more
This water tube routes the household water supply from the inlet valve to the refrigerator's water filter. Replacing a cracked or kinked line restores proper dispenser and ice maker flow and helps prevent leaks around the filter assembly.
Bottle with brush. Color: Black. Size: 0.6 fl.oz.
Replaced It With New One Read more
Note: Left Hand Roller
This meat pan trim is the front handle piece for your refrigerator's deli/meat drawer. It restores a secure grip and clean, finished look so the drawer opens smoothly and stays attached to the pan.
Replaced rather than purchasing a new refrigerator. Installation was very easy. I was a truly impressed as to how quickly my purchase arrived. It all arrived within 3 days of purchase. Thanks Will keep checking back for shelves that were out of stock when I made my purchase. My refrigerator looks almost new again. Read more
This dispenser grille sits in the well beneath your refrigerator's ice and water dispenser. It catches drips and small spills and gives the dispenser area a clean, finished look that's easy to wipe down and keep tidy.
The new Ui assembly that has all new push buttons. I found the water shutoff and the power plug when we pulled the fridge out. I shut off the water and pulled the AC plug. The whole assembly that is being replaced, came out easily when I pushed two small tabs on the lower part of the old asm bottom left and right. I used a small screwdriver to release one and then the other tab. I disconnected the electrical connector and the old unit was free. Connect the power plug to the new unit and slide... Read more
Color: Stainless
The Handle is an OEM component specifically designed for Whirlpool refrigerators. It provides easy access and convenient opening of the refrigerator door.
Symptoms of a bad handle include:
Causes can include normal wear and tear over prolonged use, excessive force, or damage from falls or impact.
This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Went online to AppliancePartsPros looked up the model found the parts, ordered the parts and super fast delivery 2 days was able to put on the handles, replace the drawer and all is good!!! Thank you for making the lookup, ordering / receiving a breeze. Jerry Read more
Ordered new Evaporator part and Drier from Appliance Pros. The part arrived earlier than expected and was properly packaged. I had both parts installed by a professional as they required a level of expertise above my capabilities. Works perfectly. Read more
This small pin clip secures the roller pin in a refrigerator drawer/track assembly, keeping the roller and pin from sliding apart. Replacing a missing or bent clip restores smooth drawer movement and helps prevent bins from tilting, binding, or dropping.
Watched the repair video which was posted with the part. The clip was a little hard to get on because it needs to be tight on the pin, but I was finally able to push it in place. It was a quick fix and now the refrigerator is level. Read more