Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Protective seal grommet for hoses, tubes, or wires passing through refrigerator cabinet. Replaces cracked, worn, or missing grommets to prevent leaks.
Replaces burned-out, dim, or flickering refrigerator light bulbs to restore clear interior visibility. Easy DIY installation—just unscrew old bulb and install new one. Verify fit by your model number.
Ordered new bulb from APPros. Read more
Collects defrost water from the evaporator and directs it to the drain. Replace if cracked, broken, or leaking to prevent water pooling under your fridge.
I took all the food out of the fridge, and tilted the refrigerator 30degrees to the left (if looking straight at the fridge). I unscrewed the cardboard backing, and moved the drip tube from the drain pan. I unscrewed the 4 screws for the drain pan, and the 2 hex screws holding up the metal plate on the left side (becuase there is a lip on the metal plate that holds the pan in). Then I could slightly pull down on the metal plate and pull the drain pan out. Then popped the new drain pan in. Read more
The Door Trim is an OEM part for Whirlpool refrigerators. It acts as a trim and edging along refrigerator shelves located on the door. The shelf trim allows items placed on shelves to be properly contained and prevent accidental falls. Causes of a bad shelf trim include cracks, chips or peeling of the trim material from years of use and stresses from items placed on shelves. Symptoms of a bad shelf trim include:
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Grey end cap that covers and protects the end of your refrigerator door handle. Replace if cracked, broken, or missing due to wear or damage.
BOUGHT A NEW END CAP. Read more
Color: White
Using the make and model of the refrigerator, I did some research on the internet to find a detailed diagram of the door. I then found AppliancePartsPros.com. Since the diagram was somewhat difficult to see clearly, the representative I spoke with on the phone went the extra mile to be sure I ordered the correct parts. Read more
Refrigerator not cooling or freezer icing up? A faulty compressor may be the cause. This part is the heart of your cooling system, requiring expertise.
Replacement mounting screw for refrigerator panels, brackets, and trim. Restores secure fit when original screw is stripped, missing, or damaged.
REPLACED THE 4 BRACKETS FROM BOTH THE REFRIGERATOR AND FREEZER DOOR(S) HANDLES. Read more
Covers the factory test opening on your refrigerator cabinet or liner. Replace if missing, cracked, or damaged to restore a finished look and seal.
This orifice is a small precision component used in the refrigerator's cooling system to regulate refrigerant or gas flow. It is typically located near the evaporator or cooling circuit and helps control the rate at which refrigerant enters the evaporator coil. Replace this part if the refrigerator or freezer section is not cooling properly, frost patterns are uneven, or a technician has identified a restricted or damaged orifice during diagnosis.
Secures the roller pin in refrigerator drawer and track assemblies. Replace if missing, bent, or broken to prevent bins from tilting, binding, or dropping.
Watched the repair video which was posted with the part. The clip was a little hard to get on because it needs to be tight on the pin, but I was finally able to push it in place. It was a quick fix and now the refrigerator is level. Read more
Black finish door handle for the fresh food compartment. Replaces broken, cracked, or worn handles. Restores secure grip and refreshes appearance.
Ordered replacement door handle. Read more
Touch-up paint for appliances. Covers chips, scratches, and worn areas on range tops, refrigerators, and other appliances. Includes brush applicator.
Ordered 2 infinite burner controls from Appliance Parts Pros and watched the online video on the replacement of them at the same time. When they arrived promptly, I was ready to take on the job. The fix only took about 15 minutes because I was prepared after watching the video. Read more
Flat washer used on refrigerator door hinge assembly. Reduces friction and distributes load for smooth door operation.
Purchased the parts after entering the model number and getting a parts break down. After receiving the parts I removed the old hinge pin and installed the new. Read more
Replace your refrigerator door gasket to restore proper sealing and prevent cold air loss. Stops frost buildup, condensation, and temperature swings. Verify fit by model number before ordering.
Fix temperature fluctuations or cooling issues in your refrigerator with this thermostat. Quick DIY repair, typically takes under 5 minutes to install.
Replaced thermostat Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.