Wrt518szfmo2 Parts

This electronic control board replaces a failed range/oven main control to restore timed functions, displays, and cycle control. It mounts behind the console and communicates with the keypad and heating elements for normal operation. What it does:

• Receives input from the front-panel keypad or touchpad and controls oven/range functions
• Manages bake, broil, timers, and display indicators so cycles start and stop correctly
• Can resolve symptoms like unresponsive controls, incorrect/displayed error codes, or cycles that won't start
• Routes power signals to relays that activate heating elements and other components

• One electronic control board

• Disconnect power at the breaker or unplug the appliance before starting any work
• Handle the board carefully to avoid static damage; avoid touching circuit traces and connectors
• Note connector locations and wire positions for correct reassembly; take photos if helpful
• After installation, restore power and verify functions before fully reassembling the console

This bale strap is a direct-replacement part that helps secure the dryer's latch/bale assembly so the door closes and stays closed during operation. Replacing a worn or broken strap restores reliable door engagement and safer drying cycles. What it does:

• Anchors the dryer door's latch/bale so the door remains properly closed during operation
• Prevents intermittent door opening that can stop cycles or cause heat loss
• Replaces a stretched, torn, or broken strap that no longer holds the latch securely
• Works with the door/latch mechanism to maintain safe operation during drying

• One bale strap

• Disconnect power before beginning any repair to avoid electrical shock
• Verify strap routing and attachment points match the original before reinstalling
• Basic hand tools are typically required; avoid forcing plastic clips to prevent breakage

This Air Duct directs airflow inside the appliance to maintain proper ventilation and efficient operation. It replaces a damaged or cracked duct to help restore normal airflow and reduce exhaust leaks. What it does

• Channels internal airflow between the blower and the venting path to help the appliance move air properly.
• Helps reduce exhaust leakage that can cause longer cycles or decreased performance.
• Addresses symptoms such as reduced drying/heating performance, unusual airflow noise, or visible cracks in the duct.
• Works with the existing blower and vent components to maintain designed airflow routing.

• Disconnect power (and gas, if applicable) before servicing to avoid shock or injury.
• Basic hand tools are typically required; follow the appliance service manual for access and removal steps.
• Inspect surrounding seals and fasteners; replace any damaged clips or gaskets for a proper fit.

Size: 1/4 lb.

Size: 1/4 inch.

Color: White

The Refrigerator Door Shelf is an OEM replacement part for Whirlpool side-by-side refrigerator doors. It provides an accessible storage surface organized into separate temperature zones.

The shelf is optimized for multi-functional use inside the refrigerator or freezer door. Its durable steel construction supports a variety of food items.

Causes of a faulty door shelf can include dents or warping from repeated impact of bottles/containers over years of use. Regular cleaning with abrasive chemicals may also deteriorate the shelf surface. 

Symptoms of a shelf in need of replacement include:

• Significant dents or damage compromising its structural integrity
• Assorted foods no longer fitting or staying properly on warped areas
• Broken mounting pins or clips inhibiting secure attachment in the door

Compatible models also include those by KitchenAid, Jenn-Air, and some Kenmore.

The Heater is an OEM part for Whirlpool refrigerators. It safely provides heat inside the refrigerator compartment to prevent food from freezing and helps maintain proper temperature levels. 

Causes of a bad heater can include dust buildup or mineral deposits over time that cause decreased efficiency, burning out of heating elements due to prolonged use, or damage from moisture or liquid spills inside the refrigerator.   

Symptoms of a bad heater include:

• Inability to maintain proper refrigeration temperatures 
• Higher energy usage as the compressor runs excessively 
• Frost or ice buildup inside the refrigerator 
• A burnt smell emitting from the heater area

This Whirlpool replacement part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This shelf trim is the front edge molding for a refrigerator glass shelf. It restores a clean, finished look and helps contain minor spills so your shelf stays secure and easy to use.

• Attaches to the front edge of the glass shelf to provide a finished surface and light spill barrier
• Helps keep items from sliding off the shelf during normal use
• Replaces cracked, warped, loose, or missing trim that won't stay attached
• Common symptoms: broken or missing edge, trim falls off, rough/sharp shelf edge, difficulty keeping items in place

• Unplug the refrigerator and remove the shelf; place the glass on a padded, non-scratch surface
• Slide or unclip the old trim from the glass edge and clean any debris from the channel
• Align the new trim with the glass edge and press firmly to snap/slide it into place
• Reinstall the shelf and confirm a secure, level fit

This replacement shelf trim restores the front edge/retainer on a refrigerator shelf to keep items from sliding and give the shelf a finished appearance. It's a simple cosmetic and functional replacement for cracked, chipped, or missing trim. What it does:

• Replaces damaged or missing shelf edge trim to help keep items from sliding forward
• Restores a finished look to the shelf and helps stabilize stored items
• Commonly used when trim is cracked, chipped, loose, or broken
• Matches OEM fit and mounting style for a direct swap

• Remove food and shelves from the refrigerator before starting
• Use gloves to avoid cuts from broken plastic or glass and to protect finished surfaces
• Trim typically snaps or slides into place; follow vehicle-specific instructions for correct orientation
• If trim won't seat easily, inspect for broken clips or obstructions

This hinge shim corrects hinge spacing to help doors sit square and reduce rubbing or uneven gaps. It's a simple replacement used to restore proper door alignment so the door closes and seals more reliably. What it does:

• Adjusts hinge spacing to realign doors; use when a door leans or shows uneven gaps.
• Helps the door close and seal better by restoring correct hinge clearance.
• Prevents binding or rubbing that can occur when a hinge or door is slightly out of position.
• Small, low-profile shim used as a targeted fix without replacing the entire hinge assembly.

• Disconnect power to the appliance before starting; if applicable, shut off the water supply.
• Support the door while loosening hinge fasteners to avoid sudden movement or injury.
• Install the shim between hinge components as shown in the service diagram; retighten fasteners evenly.

Color: Grey