Wrx35sdbm00 Parts

This electronic control board manages the appliance's user console, display and cycle controls so your oven or range responds correctly to button presses, timing and selected functions. Replacing a failed board restores normal electronic control. What it does:

• Receives input from the control panel and sends signals to heating elements, relays and other subsystems
• Controls the display, timers and cycle selection for accurate operation
• Works as the main logic board coordinating electronic functions of the appliance

• Disconnect power at the breaker or unplug the appliance before starting any work
• Label or photograph wire locations, then disconnect wiring harnesses carefully
• Avoid static damage—handle the board by the edges and ground yourself before touching components

This replacement door gasket seals the refrigerator or freezer door to maintain proper temperature and help prevent moisture and frost buildup. A direct-fit seal that restores an airtight closure and improves appliance efficiency. What it does:

• Creates an airtight seal around the door to help keep cold air in and warm air out
• Reduces frost and condensation buildup inside the compartment
• Helps the appliance maintain set temperatures for better food preservation
• Can reduce run time by preventing air leaks that force the compressor to work harder

• One replacement door gasket

• Inspect the door frame and mounting channel for damage or debris before installing
• Warm the gasket slightly (per OEM guidance) to ease alignment, and press into the mounting channel uniformly
• Check for an even seal around the full door after installation; adjust as needed
• Unplug the appliance before performing any service and follow all safety warnings from the manufacturer

Replacement screw that secures panels, brackets, and other components inside your appliance, keeping assemblies tight and aligned. Replace missing or stripped hardware to eliminate looseness, reduce vibration, and restore a solid, factory-fit hold.

• Fastens panels, brackets, trim, or internal components
• Helps maintain alignment and reduce rattling/vibration
• Replaces missing, loose, rusted, or stripped hardware
• Common signs: stripped head/threads, loose panel, buzzing/rattling noises

• Disconnect power before service; shut off gas/water if applicable
• Match to the original screw; start threading by hand to avoid cross-threading
• Use the correct driver size to prevent stripping
• Tighten snugly; do not overtighten. If it won't hold, inspect the receiving hole/clip

A genuine replacement screw used to secure appliance panels, brackets, and components so assemblies stay aligned and stable. Installs quickly with a screwdriver or driver bit to restore proper fit and reduce rattling. What it does:

• Secures panels, trim, brackets or internal components to keep parts properly aligned
• Prevents loose or vibrating panels that can cause noise or wear
• Holds mounting points that keep doors, seals, and assemblies operating correctly
• Replaces stripped, missing, or corroded fasteners that compromise fit

• Turn off and unplug the appliance before starting any repair
• Use the correct screwdriver or driver bit to avoid stripping the head
• Tighten until snug; avoid overtightening which can strip threads or deform parts
• Keep removed hardware organized and replace like-for-like for best fit

This mounting bracket secures internal panels and components to restore proper alignment and support. It replaces a worn or broken bracket to reduce rattling and keep parts correctly positioned for safe operation. What it does:

• Provides a stable attachment point for panels or assemblies
• Stops movement that can cause rattling, noise, or misalignment
• Restores proper fit between connected parts after damage or wear
• Helps prevent strain on adjacent components that can lead to failure

• High-level replacement: remove nearby panels or fasteners to access and swap the bracket
• Use correct fasteners and torque; replace any damaged clips or screws
• Disconnect power before working on electrical appliances and follow safety procedures

This door bumper cushions and stabilizes the appliance door to reduce noise and wear from slamming. It helps the door close smoothly and maintain proper alignment for reliable operation. What it does:

• Absorbs impact to prevent metal-on-metal contact and reduce slamming noise
• Helps the door sit evenly to improve latch engagement and sealing
• Reduces vibration and rattling during operation
• Simple replacement that restores proper door feel and alignment

• Disconnect power to the appliance before starting any repair
• Access the bumper by opening the door; some models may require removing the door or inner panel
• Press or snap the bumper into the locating hole or slot until secure; replace any retaining clips if present

The Drain Funnel is an OEM part for Whirlpool French door refrigerators. It serves as the sloped plastic strainer that guides water from the evaporator coils s it into the drip pan below. 

Causes of a faulty Drain Funnel include cracks or punctures developing from continuous use transferring water weight. Mineral deposits or food particles that gradually collect on funnel surfaces could restrict proper drainage as well over time.

Symptoms involve: 

• Puddling or spilled water inside refrigerator interiors
• Uncontrolled leaks potentially damaging other components  
• Restricted airflow if funnel clogs from sediment buildup
• Musty odors developing without efficient drainage management

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement door gasket creates a tight seal to help prevent leaks and maintain proper appliance performance. It restores the sealing surface around the door so the appliance can operate as intended. What it does:

• Seals the door opening to help prevent water or air from escaping
• Helps maintain consistent internal temperature and cleaning performance
• Reduces leaks and pooling beneath the appliance
• Can eliminate drafts, rattling, or improper door closure related to a worn seal

• One gasket

• Designed for direct replacement; inspect mounting channel for damage before installing
• Clean the sealing surface and remove old adhesive or debris for a proper fit
• Press gasket fully into the channel and verify an even seal around the entire door
• Disconnect power and water before servicing

The door hinge is an OEM part for Whirlpool refrigerators. It plays a role in holding the refrigerator door securely in place while allowing it to swing freely for easy access. The hinge is designed to withstand the pressure of opening and closing the door smoothly over many years of use.

Causes of a bad hinge include wear and tear from repeated opening and closing of the door, exposure to excessive force or impact, or overloading of the door with heavy items.

Symptoms of a bad hinge include:

• The door not closing properly or unevenly
• Increased effort required to open or close the door
• Noises or squeaking coming from the hinge area
• The door leaning or not staying securely closed

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This drip tray collects defrost and condensation water under the refrigerator to help prevent leaks and water pooling on the floor. It restores proper water capture and drainage for affected fridge models. What it does:

• Catches defrost and condensation runoff from the evaporator or drain system
• Helps prevent water pooling beneath the appliance and potential floor damage
• Works when original tray is cracked, warped, clogged, or missing
• Compatible with factory mounting points and drain alignment when the correct part is used

• One replacement drip tray

• Disconnect power before servicing to avoid electrical shock
• Access may require removing kick plate or lower front panel; follow your model's service instructions
• Slide or snap the tray into place and secure any retaining clips or screws removed earlier

A replacement machine screw with 8-32 threads used to secure panels and components on compatible Whirlpool appliances. Installs quickly to restore proper fit and stop rattling or loose parts. What it does:

• Secures panels, trim, brackets or components that use 8-32 machine-thread fasteners
• Restores proper alignment and prevents vibration-related noise
• Replaces missing, stripped, or damaged screws that allow parts to come loose
• Works where a standard 8-32 machine screw is specified by the manufacturer

• Disconnect power and/or gas before servicing the appliance to reduce shock or injury risk
• Use the proper screwdriver or nut driver for the screw head to avoid stripping
• Thread gently and stop when snug; do not overtighten to prevent stripping or damage
• If threads are damaged, replace with the correct-size screw rather than forcing it

This condenser fan shroud secures and directs airflow around the condenser fan to help efficient heat dissipation. Replaces a damaged or missing shroud to restore proper fan positioning and airflow around the condenser coil. What it does:

• Holds the condenser fan motor and blade in the correct position relative to the condenser coil
• Channels airflow for more effective heat transfer from the condenser
• Prevents the fan blade from contacting nearby components
• Can reduce noisy operation caused by a loose or damaged shroud

• Intended to be installed by someone comfortable with basic appliance repair
• Disconnect power to the appliance before accessing the condenser area
• Inspect surrounding components (fan blade, motor mounts, fasteners) and replace any damaged parts
• Use the OEM mounting hardware and torque to manufacturer recommendations when reassembling

This left-side stop pan is a replacement mounting/support piece that helps hold and align the appliance's lower assembly while directing any incidental moisture away from internal components. It restores fit and quiet operation after damage or wear. What it does:

• Replaces a damaged or missing left-side stop pan that can allow panels to rub or sit unevenly
• Helps maintain proper alignment of the lower/front assembly and related trim
• Reduces rattling or vibration caused by loose or broken support parts
• Helps channel incidental drips away from sensitive components

• Disconnect power (and water, if applicable) before beginning any repair
• Removal of the front or lower access panel is commonly required; keep fasteners for reuse unless damaged
• Inspect adjacent clips and mounting tabs; replace if worn to ensure a secure fit

This door closer is the hinge-mounted part that helps a dishwasher door move smoothly and stay aligned for reliable closing. Restores controlled door motion to reduce slamming and improve latch engagement. What it does:

• Guides and cushions the dishwasher door during opening and closing
• Helps the door stay properly aligned so the latch can engage
• Reduces sudden slamming or dropping of the door
• Commonly replaced when the door sags, drops, or closes unevenly

• One door closer assembly as shown

• Disconnect power to the appliance before beginning any repair
• Remove outer door panels or kick plate as needed to access the hinge/closer
• Handle springs and hinge components carefully; parts may be under tension

This door hinge secures and guides a refrigerator door, restoring smooth opening, closing, and proper door alignment. It's a direct-fit replacement designed to help stop door sag, rubbing, or gaps that let cold air escape. What it does:

• Supports the refrigerator door and keeps it aligned on the cabinet
• Allows the door to pivot smoothly when opening or closing
• Helps maintain a proper seal to preserve internal temperature
• Common symptom: door droops, rubs, binds, or won't stay closed

• One door hinge

• Installation requires basic hand tools; follow OEM instructions for correct alignment
• Keep door supported or use a second person while replacing hinges to prevent injury or damage
• Inspect mounting screws and hinge mating surfaces; replace any damaged fasteners