Wrx35sdbm02 Parts

This combo device is a small electronic module used in select appliances to integrate multiple functions into one component. Replacing a faulty module helps restore reliable operation of the system it supports.

• Combines two sub-functions in a single, compact electrical device
• Interfaces with the appliance's main control through a wired connector
• A failed device can cause the related feature to stop working or trigger fault codes
• Present as intermittent operation of the associated feature

• Disconnect power before servicing; verify no voltage is present
• Access location per service manual; note and label connector orientation
• Handle electronics with ESD care; avoid touching pins/contacts
• Route and secure wiring as originally; perform a diagnostic/self-test after installation

Cantilever-style bin that mounts inside the refrigerator door to hold bottles, jars, and condiments. Replace if cracked, broken, or missing.

Fix warm fridge temps or excessive frost with a new evaporator fan motor. Restores proper airflow across coils for consistent cooling. DIY-friendly.

Replace your cracked, chipped, or broken refrigerator glass shelf. This adjustable storage platform organizes items in your fridge compartment.

Vessel water filter that replaces the refrigerator's vessel-style cartridge to restore filtered water delivery and reduce visible particles, off tastes and odors at the dispenser and ice maker for clearer, better-tasting water. What it does:

• Filters water flowing through the vessel cartridge to reduce sediment and visible particulate in dispenser output.
• Helps improve taste and odor commonly noticed when a filter is aged or clogged.
• Addresses symptoms such as discolored water, stray particles in dispensed water, or unpleasant dispenser/ice taste.
• Restores expected filtration performance when an old or saturated vessel cartridge is the source of water-quality complaints.

• Turn off the refrigerator water supply and before beginning replacement.
• Remove the old vessel cartridge per OEM instructions and install the new filter in the same orientation.
• After installation, run the water dispenser until the water runs clear to purge air and any loose media.
• If you see leaks or continue to have water-quality or flow issues after replacement, shut off the water.

Stainless steel refrigerator door handle for smooth opening and closing. Replace worn, cracked, or missing handles from frequent use or impact damage.

This spigot routes water from the internal supply to the dispenser outlet, delivering a controlled stream. Replacing a cracked or worn spigot helps restore proper dispensing and reduces drips or leaks at the dispenser area.

• Directs water from the internal tubing/reservoir to the dispenser outlet
• Maintains a defined flow path to help prevent splashing and after-drip
• Common symptoms of failure: dripping at the dispenser, slow/erratic flow, leaks inside the door, or visible cracks at the outlet
• Replace if damaged, leaking, or obstructed by mineral buildup

• Unplug the appliance and shut off the household water supply
• Dispense water to relieve line pressure before replacement
• Access the dispenser; note tubing orientation and fully seat/secure connections
• Restore water and power; flush the system and check all joints for leaks

Illuminates your refrigerator's ice and water dispenser area. Replace if light is dim, flickering, or out. Confirm fit with your model number.

The Motor-Evaporator is an OEM part for Whirlpool refrigerators. It powers the cooling system responsible for maintaining proper internal temperatures. The evaporator motor functions by circulating refrigerant through coils located behind the refrigerator liner. 

Symptoms of a bad motor evaporator include:

• Fluctuating interior temperatures
• Inability to achieve desired cooling levels
• Ice buildup caused by inefficient airflow
• Unusual noises or vibrations from the cooling system

Causes of failure relate to wear and tear of internal motor components over time. Replacement ensures optimized temperature performance through consistent operation of refrigerant circulation.

This OEM Whirlpool part is also compatible with Kenmore, Maytag, Jenn-Air, and some KitchenAid models.

Replace your refrigerator freezer door gasket to restore proper sealing and energy efficiency. Installs without adhesive. Confirm fit with your model number.

This TSD2 115V compressor start device helps a refrigerator or freezer's compressor start reliably by providing the correct electrical assist at startup. Replacing a failing unit can help restore cooling consistency and stop repeated clicking or brief humming.

• Provides the initial start assist to the hermetic compressor on 115V systems
• Automatically disengages the start winding once the motor reaches speed
• Helps reduce hard-start short cycling
• Failure symptoms include warm temperatures, intermittent cooling, clicking from the rear, or the compressor humming briefly and shutting off

• Disconnect power before servicing
• Note terminal orientation; push straight onto compressor pins without bending
• Transfer the separate overload protector and cover if your unit uses them
• If the compressor still won't start after replacement, further diagnosis of the compressor, overload, or supply voltage may be required

Drawer roller axle enables smooth sliding of refrigerator shelves and bins. Replace when drawers stick or rollers wear from regular use. Confirm fit with your model.

Supports and guides your refrigerator's upper drawer pan for smooth gliding. Replace when drawer sticks, grinds, or doesn't roll evenly. Confirm fit with model.

Replace your refrigerator's cracked or missing base grille. This toe kick panel mounts across the bottom front to restore a finished look and protect components.

Ice maker overflowing or won't stop making ice? This shut-off arm senses ice levels to control production. Simple DIY fix in under an hour.

Channels ice from maker to dispenser opening. Replace if cracked, broken, or missing to prevent ice scatter and jams. Installs in freezer door dispenser.