Wt1101ct Parts

This cover cap is a small plastic trim piece that restores a finished appearance and helps protect the underlying fastener or opening from dirt and debris. It's a simple cosmetic and protective replacement for worn or missing caps. What it does:

• Covers and protects exposed screws, fasteners or small openings on the appliance
• Prevents dirt, lint and moisture from entering vulnerable gaps
• Restores a clean, finished look to damaged or missing trim
• Common symptom: missing, cracked or loose cap that leaves a visible hole or exposed screw

• Disconnect power to the appliance before starting any repair
• Usually installs by snapping into place; may require removing an adjacent panel or fastener first
• Avoid excessive force to prevent breaking the plastic; use a plastic trim tool if needed

The Suspension Rod Kit is an OEM part for LG washing machines. This kit includes four suspension rods that support the washer tub, helping to absorb shocks and reduce vibrations during the wash and spin cycles. The kit includes 4 suspension rods.

Causes of a bad suspension rod kit include wear and tear from regular use, unbalanced loads causing excessive strain, or physical damage due to mishandling or impact. Keeping the suspension rods in good condition is essential for maintaining the washer's stability and preventing excessive noise and movement.

Symptoms of a bad suspension rod kit include:

• Excessive shaking or vibrating during the wash cycle
• Loud banging noises
• The washer tub being off-balance or tilting
• The washer moving or "walking" during operation

This OEM LG part is also compatible with Sears/Kenmore.

The Hose Connector is an OEM part for LG washing machines. It controls the water flow during the wash and rinse cycles. This part is designed to facilitate a secure and leak-proof connection between different sections of the washing machine, such as the inlet valve and the tub, or the pump and the drain hose. Ensuring these connections are secure is vital for the efficient operation of the washing machine, preventing leaks and maintaining optimal water usage.

Causes of failure may involve cracks, splitting, or collapsed seals/gaskets, as well as excessive mineral or foreign deposits that can obstruct water flow.

Symptoms of a bad hose connector are:

• Slow or incomplete filling during wash cycles
• Water leaks at the supply valve or connector area
• Connector split, cracked or compromised fittings

This genuine LG replacement is also compatible with Kenmore washing machines.

The Main PCB Assembly is an OEM part for LG washing machines. As the central control unit, the Main PCB Assembly manages critical washer functions like water levels, wash temperatures, spin speeds, cycle times and more. It uses sensor input to monitor operations and ensure the selected cycle runs efficiently. 

Causes of a bad Main PCB Assembly include electronic component failure from power surges, moisture damage, or simple wear over time.

Symptoms of a bad Main PCB include:

• Cycles not starting or incomplete cycles
• Inability to select or change cycles
• Flashing error codes
• Abnormal sounds or vibrations
• Temperature control issues

This OEM replacement is compatible with LG and some Sears/Kenmore models

This display power control board assembly powers and controls the appliance display and touch/interface functions so the controls respond correctly and display status information clearly. Designed as a direct-replacement control board. What it does:

• Supplies and regulates power for the front display and control interface
• Processes user touch/press inputs so selected functions start and stop
• Drives display indicators so error codes and status are visible
• Resolves symptoms such as a blank or unresponsive control panel, incorrect or flashing display icons, or intermittent control behavior

• 1 display power control board assembly

• Disconnect power before attempting replacement to avoid shock or damage
• Handle the board by edges and avoid contact with circuitry or connectors
• Verify connector orientation and seating; use appropriate fasteners and insulation

This top cover replaces the appliance's upper cabinet panel to restore a finished appearance and protect internal components from dust and debris. It fits over the appliance top for a clean, factory look. What it does:

• Covers and protects the appliance top and internal components from dust and debris
• Restores the appliance's finished exterior after repairs or part replacement
• Helps maintain safe, enclosed access to control and wiring areas
• Addresses visible damage, rust, dents, or missing top panel

• Top cover (1)

• Remove power and disconnect the appliance before starting any work
• Typical installation requires removing a few screws and lifting the old cover off; keep fasteners for reuse if undamaged
• Check alignment before tightening fasteners to avoid gaps or stress on the panel
• If sharp edges are present, handle with gloves and take care to avoid scratching finishes

This nozzle assembly directs and focuses spray for proper cleaning or dispensing, restoring correct fluid flow and spray pattern. It helps maintain performance and prevents uneven distribution during operation. What it does:

• Directs spray or fluid flow to the correct area for cleaning or dispensing
• Restores even spray pattern and coverage for improved cleaning performance
• Helps stop erratic or weak spray caused by a damaged or clogged nozzle
• Can reduce leaking or overspray from a broken or misaligned nozzle

• One nozzle assembly

• Disconnect power and shut off water supply before starting
• Access may require removing exterior panels or dispenser components; keep track of screws and fasteners
• Inspect mounting gasket or seals and replace if worn to prevent leaks

A standard replacement bolt used to secure appliance panels and internal assemblies. This OEM-style fastener restores proper fit and reduces movement that can cause noise or misalignment in appliance components. What it does:

• Fastens panels, brackets, and components to maintain structural integrity
• Keeps moving parts aligned to help prevent rattling or vibration
• Replaces missing, loose, or corroded bolts that compromise fit
• Suitable where a standard machine/sheet-metal bolt is required

• One bolt

• Disconnect power and water before servicing the appliance
• Use the correct driver/socket to avoid stripping the head or threads
• Tighten securely but avoid over-torquing; replace any damaged nuts or washers
• Inspect mating threads and clean or chase threads if corroded

This clutch assembly is a genuine OEM replacement part sourced directly from the manufacturer and is intended for use in washing machines. The clutch assembly controls the movement of the internal tub and agitator during operation. Over time and with regular use, the clutch assembly may become worn and fail to work correctly. If the washing machine tub is not moving back and forth during the wash cycle or is not spinning during the spin cycle, the clutch is broken. If it is moving or spinning, but not efficiently or fast enough, the clutch is worn and beginning to fail. In both of these instances, the clutch assembly should be replaced. Excessively wet clothes at the end of the laundry cycle can also be indicative of a broken clutch.A screwdriver, socket set, putty knife, and impact wrench with a large 38mm socket are required to make this replacement. Ensure the power is disconnected and the machine is drained. While the tub is out of the machine, take time to clean the area of gunk and buildup. Wear gloves while working on the machine.This clutch assembly is made of durable metals and is individually sold. It is designed for use in washing machines by LG and Kenmore.