Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This replacement ring fits in its designated location within your appliance to secure or space components so they operate smoothly and stay aligned. Replacing a worn or missing ring helps restore proper fit and prevent looseness and noise. What it does:
Replace with new outer frame and new handle . Easy to install. Read more
Thermister
After reviewing various posts on the internet, I tested the high heat temperature limiter and determined it was faulty due to lint buildup. Ordered the parts from AppliancePartsPros.com on Friday afternoon and parts were delivered on Saturday afternoon. Replaced the parts- dryer works as good as new. Read more
Captures lint and debris during drying cycles. Replace if damaged, torn, or clogged to restore airflow and drying efficiency. Verify fit with your model.
Thank to you guy I got a new oem filter and will have the greatest Christmas ever thanks jd Read more
Supports smooth drum rotation in your dryer. Replace if you hear squeaking, whistling, or rumbling during cycles. Verify fit with your model number.
Replaced front drum roller wheels and rear drum bearing.Pull plug. Remove 2 screws holding top panel,slide rearward and lift panel off. Remove all screws from back panel,wiring cover and cord clamp. Remove back panel and feed cord through hole.No need to remove cord. Remove 2 screws from heater box and let it drop rearward.Remove belt from motor pulley and let tensioner rest against motor pulley.This step will trigger the switch that disables motor if belt breaks.The switch does not reset... Read more
Temperature monitoring sensor located in the dryer's heating system that regulates drying temperatures. Replace if clothes aren't drying properly, take too long to dry, or if the dryer overheats.
In fact, days later after reading the owners manual more closely I found an area that showed the indication of a lock to indicate that the child lock had been set. After a 3 second adjustment the child lock was off and the dryer has worked fine since. I am keeping the suggested parts as backup for subsequent problems. The message is: read the entire manual. Read more
Replacement leveling foot for dryers. Installs on the bottom corner to elevate and stabilize the appliance. Order if cracked, broken, or missing.
AppliancePartsPros had the parts I needed. I watched the video tutorial, which was very helpful, then installed the new feet. Read more
Drive belt transfers power from motor to drum in your dryer. Replace if you hear squealing, slipping, or drum won't turn. Verify fit with model number.
This is a cover lid for the storage compartment on a dryer. It protects the storage area and keeps it enclosed when not in use. Replace this part if the lid is cracked, broken, missing, or no longer stays securely in place.
Easy fix. Slid old open door sideways to remove and reinstalled the new one in the same fashion. Read more
This is a drum support roller that sits on an axle and helps the dryer drum rotate smoothly during operation. The roller bears the weight of the drum and its contents, reducing friction and noise. Replace this part if you hear thumping, squealing, or rumbling noises while the dryer is running, or if the drum no longer spins freely.
The Limiter-Temperature is an OEM component specifically designed for select Bosch vented dryers requiring controlled heat. As a safety device, it restricts air exiting the exhaust to prevent accidental ignition of accumulated lint.
Precisely calibrated mechanothermal links automatically trip circuit breakers upon exceeding preset levels. Isolated housings shield reactive alloys from moisture while enabling thermodynamics to naturally trigger protective functions.
Causes requiring replacement involve over-heating from sustained over-drying preventing auto-stops. Physical damage exposing reactive cores could also impair intended response times.
Symptoms signaling the need for a new temperature limiter include:
This OEM Bosch replacement component is also compatible with some Gaggenau, Thermador, and select Kenmore dryers employing sensitive temperature cutoffs. Correct installation restores critical overheat protection circuits.
The Blower Belt is an OEM part for Bosch dryers. This belt efficiently transmits rotation from the motor to the blower fan, circulating heated air through the dryer drum.
Causes of a bad blower belt can include drying and cracking from heat exposure over many cycles.
Symptoms of a bad blower belt include:
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
It needed a new drive belt Read more
If your dryer door won't stay closed or the handle broke, this metal hook works with the door latch for secure closure. Quick 5-minute repair for Bosch dryers.
Replaced with part found here at AppliancePartsPros.com. Removed a few screws attached a new handle and five minutes later all was good again! Used needle nose pliers to get a grip on the broken handle screw lugs. I very much appreciate finding the parts needed here at AppliancePartsPros.com! Read more
Seals the gap between your dryer door and drum to contain heat and prevent lint escape. Replace if torn, cracked, or causing longer dry times.
Missing or damaged condensate drain hose? This dryer drain hose channels moisture from your condensation dryer to your household drain. Easy DIY fix.
We ordered the replacement drain hose kit from Appliance Parts Pros.com. Read more
This is a heat exchanger filter assembly used in condenser dryers. It helps recover heat from the exhaust air and condense moisture so the dryer can operate without an external vent. Replace this part if drying times have increased significantly, the dryer is overheating, or the unit is not properly removing moisture from clothes.
Replacement drum belt wraps around the dryer drum and motor pulley to rotate the drum during drying. Replace if drum won't turn or tumble. Confirm fit.
My biggest problem was finding the service manual for the WTA3500. I finally found it at APPLIANCEJUNK.COM, which is a sister website to APPLICANCEPARTS.COM. This was a life saver and showed me how to properly disassemble the side panels and remove the control panel. Replacing the drum belt is a bit complicated because the front of the machine has to be removed to slip the new belt over the drum. There is a good video on YouTube that shows the steps for this. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.