Wte4400wq Parts

The Power Cord is an OEM part for Bosch electric dryers. It provides power to heating elements and motor components, enabling all dryer functions. Working seamlessly behind wall panels and the control board, the cable supply facilitates safe and reliable drying performance cycle after cycle.

Symptoms of a bad power cord include:

• The dryer fails to power on or heat
• Flickering lights or control issues  
• Burning smells coming from internal areas
• Cable sheathing showing defects or damage

Causes for failure relate to insulation breaks, fraying, or cuts to wiring over time. Accidental impact, animal/insect damage, or general wear and tear may also degrade cable supply integrity.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This replacement seal restores a tight, leak-resistant connection between mating components inside your appliance. Replacing a worn seal helps stop drips at the joint and keeps the system operating reliably without nuisance leak faults.

• Forms a compressible barrier between parts to prevent leakage at a connection point
• Helps protect nearby components from moisture intrusion and corrosion
• Typical failure signs: moisture around a joint, puddling beneath the unit, or leak/overflow error messages
• Replace if the original is cracked, flattened, cut, brittle, or missing

• Disconnect power and shut off the water supply before servicing
• Access the connection, note the seal's orientation, and remove the old seal
• Clean mating surfaces; lightly moisten the new seal and seat it evenly without twisting or pinching
• Reassemble and test for leaks before reinstalling covers or panels

This access panel cover protects internal components and keeps wiring and mechanisms enclosed for safe, reliable operation. It restores the appliance's exterior finish and helps prevent debris from entering sensitive areas. What it does

• Shields internal parts and wiring from dust, moisture, and accidental contact
• Helps maintain correct airflow and component spacing behind the panel
• Stops rattles and vibration-related noise when properly seated
• Common symptom fix: cracked, loose, or missing cover causing exposed components or unusual noise

• One access panel cover

• Refer to your model's service manual for correct removal and reinstallation steps
• Disconnect power before starting any repair
• Use proper fasteners and align tabs to avoid damaging mounting clips or the cover
• If clips or screws are broken, replace them to ensure a secure fit

A mechanical door latch assembly that secures the dishwasher door during operation to allow cycles to run and help prevent water leaks. Replaces a worn or broken latch so the door closes and locks reliably. What it does

• Secures and locks the dishwasher door so the control can start and maintain a wash cycle.
• Stops the door from reopening mid-cycle, helping prevent water spills.
• Can resolve symptoms such as the dishwasher not starting, displays error codes related to door/latch, or a loose/broken door catch.
• Operates as the physical locking mechanism — no electronic control functions included.

• One mechanical door latch assembly.

• Disconnect power to the appliance before beginning work to avoid shock; turn off water if accessing inner panels.
• Remove the inner door panel or access panel to access and replace the latch; keep fasteners organized.
• Verify correct alignment and smooth operation of the latch before reassembling the door panels; do not force parts.

This metal paper capacitor replaces a failed film capacitor in household appliances to help stabilize voltage and support reliable electrical operation. It's used where the control or motor circuit needs clean, steady capacitance for proper function. What it does:

• Smooths and stabilizes voltage to reduce electrical noise and spikes
• Helps motors and control circuits start and run more reliably
• Can reduce intermittent operation, sputtering or weak motor performance
• Prevents control errors caused by unstable supply to electronic components

• Always disconnect the appliance from power before accessing electrical components
• Discharge the capacitor safely before handling to avoid shock
• Inspect mounting and wiring for heat or corrosion; replace connectors if damaged

This fill hose routes water from the supply or inlet valve to the appliance tub, restoring normal water flow for cycles that need filling. It's a direct-replacement hose designed to prevent leaks and ensure proper fill performance. What it does:

• Carries incoming water from the inlet valve to the washer/dish tub or dispenser
• Replaces cracked, split or collapsed hose that causes leaks or poor filling
• Helps stop continuous running or under-fill symptoms when the hose is damaged
• Restores a proper water path so fill cycles complete correctly

• One replacement fill hose

• Turn off water supply and power to the appliance before starting work
• Inspect and reuse or replace hose clamps; tighten securely to prevent leaks
• Route hose without kinks and ensure fittings match valve and tub connections

This heating element replaces the dishwasher's wash water heater to restore normal wash and dry performance. It heats incoming water for better cleaning and helps reduce moisture left in dishes after a cycle. What it does:

• Heats dishwasher wash water to improve detergent activation and soil removal
• Supports dishwasher drying by raising interior temperature during/after the cycle
• Common symptom: dishwasher not heating water or dishes not drying properly
• Common symptom: longer-than-normal cycles or decreased cleaning performance

• Disconnect power and water before beginning repair; this part requires access to the lower tub/pump area
• Inspect and replace any tub gaskets or seals if they are damaged or leaking when reassembling
• Verify electrical connections are secure and test for continuity with a multimeter before and after installation
• If you see corrosion or other damage to mounting hardware, replace affected components to ensure a safe, watertight fit

This hose connection inlet provides the sealed connection point where the appliance's water inlet hose mates to the valve or tub, restoring a leak-free water feed and reliable flow for normal operation. What it does

• Connects the inlet water hose to the appliance inlet fitting or valve, directing water into the unit
• Creates a sealed joint to prevent drips and leaks at the hose connection
• Replaces cracked, worn, or damaged fittings that can cause visible leaks or reduced water flow
• Helps resolve symptoms such as water pooling under the appliance, continuous dripping, or inlet hose not seating properly

• One hose connection inlet

• Always disconnect power and shut off the water supply before starting work
• Inspect and replace any worn O-rings, gaskets, or clamps when installing this fitting
• Hand-start threads, then tighten clamps or fasteners to secure the hose; avoid over-tightening plastic parts
• After installation, restore water and power and check carefully for leaks during a short test cycle

This air channel guides airflow inside the appliance to support proper venting and drying performance. It helps direct air where needed to reduce moisture buildup and maintain consistent circulation for reliable operation. What it does:

• Directs and channels internal airflow for effective venting and drying
• Helps prevent moisture accumulation in targeted areas
• Ensures consistent air paths for heating/vent systems to perform as designed
• Commonly associated with poor drying, pooling, or ventilation issues when damaged

• One air channel piece as shown

• Turn off power and water supply to the appliance before starting work
• Access typically requires removing outer panels or interior trim
• Handle plastic parts carefully to avoid cracking; replace any broken mounting tabs