Need Help?
Call or text
The Door Hinge is an OEM part for Bosch dryers. This hinge is designed to securely attach the dryer door to the frame, allowing it to open and close smoothly while maintaining a proper seal during operation.
Causes of a bad door hinge can include regular wear and tear, damage from excessive force when opening or closing the door, or corrosion from exposure to moisture and heat.
Symptoms of a bad door hinge include:
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
Once I figured out how to remove the remaining hinge stuff I found this amazing website with the hinge part. They shipped it super fast! Once arrived I repaired it good as new in under a minute. Read more
Thermister
After reviewing various posts on the internet, I tested the high heat temperature limiter and determined it was faulty due to lint buildup. Ordered the parts from AppliancePartsPros.com on Friday afternoon and parts were delivered on Saturday afternoon. Replaced the parts- dryer works as good as new. Read more
Supports smooth drum rotation in your dryer. Replace if you hear squeaking, whistling, or rumbling during cycles. Verify fit with your model number.
Replaced front drum roller wheels and rear drum bearing.Pull plug. Remove 2 screws holding top panel,slide rearward and lift panel off. Remove all screws from back panel,wiring cover and cord clamp. Remove back panel and feed cord through hole.No need to remove cord. Remove 2 screws from heater box and let it drop rearward.Remove belt from motor pulley and let tensioner rest against motor pulley.This step will trigger the switch that disables motor if belt breaks.The switch does not reset... Read more
Captures lint and debris during drying to prevent buildup and maintain airflow. Replace when clogged, torn, or causing sensor errors. Confirm fit with your model.
At first I tried to clean my current trap. It didn't seem to work or would for a couple minutes. Eventually I thought about replacing it and that's how I found this site. Read more
Dryer door won't stay closed or won't start? A broken door latch is often the cause. This replacement latch is a straightforward 5-10 minute fix.
Unscrewing the panel off the door & sliding the old piece out & replacing with the new piece only took 5 min. & saved us a $100 repairman charge. Be sure to have a star shaped screwdriver. Read more
Drum support roller wheel for Bosch dryers. Mounts on axle shafts to stabilize and support the rotating drum. Replace when cracked, worn, or squeaking.
If your dryer won't start or stops mid-cycle, a faulty door switch may be the cause. This interlock detects door closure to allow operation. Easy DIY fix.
The Ignition Device is an OEM part for Bosch dryers. This part ignites the gas in the dryer's burner, initiating the heating process necessary for drying clothes. By generating the spark that lights the burner's gas, it plays a pivotal role in the dryer's operation, contributing to efficient and effective drying cycles.
Causes of a malfunctioning Ignition Device include wear and tear over extended use, buildup of lint and debris affecting the ignition process, and potential damage from electrical surges.
Symptoms indicating the need for a new ignition device include:
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
Changed out the ignitor with a new one. Vacuumed out entire dryer and vent line. Read more
Dryer stops after a few seconds with lint light on? A faulty moisture sensor may be the cause. Mineral buildup distorts humidity readings in the drum.
Dryer stops mid-cycle or won't heat? This thermal cutoff limiter prevents overheating damage. Requires panel removal to access. Replaces failed limiter.
Replace your worn dryer door sealing strip to restore a tight closure and prevent air leaks, drafts, and odors. Verify fit with your model number.
Small mounting clip that secures dryer exterior panels and trim in place. Replace if clip is broken, cracked, or missing to restore snug panel fit.
The Screw is an OEM part for Bosch microwave ovens. It is a component that secures the outer casing and front paneling of the microwave. The screw is designed to withstand repeated heating and cooling cycles without loosening or degrading.
Symptoms of bad screw include:
- The front panel or outer casing becoming loose, detached, or misaligned - Gaps appearing in the seams or joints of the microwave structure - The door not sealing properly leading to leaks
Over many uses of the microwave, screws can wear down or strip out from over-tightening during repairs or installations. It is important to replace worn screws to ensure the microwave maintains an intact structure.
Replacement mounting screw for dryers and washers. Secures panels, brackets, and trim pieces. Restores snug fit when original fastener is stripped or missing.
Adjustable leveling leg supports and balances your dryer during operation. Replace when worn, damaged, or causing wobbling. Confirm fit with model number.
Replacement mounting screw for securing panels, brackets, and trim on appliances. Needed when original fasteners are stripped, missing, or lost.