Wtw1500 Parts

This electronic control board is the appliance's main control module, directing cycle timing and powering key components. Replacing a failed board restores responsive controls and reliable operation when the unit won't start, won't advance, or shows erratic behavior.

• Coordinates cycle logic and timing for proper operation
• Controls power to loads such as motors, valves, fans, and heaters
• Monitors inputs from switches and sensors; stores/triggers error codes
• Interfaces with the user controls; faults can cause unresponsive or flickering displays
• Common symptoms include no start, won't run or advance, intermittent shutdowns, or random error alerts

• Disconnect power at the breaker or fuse before servicing
• Use ESD precautions; handle the board by the edges to avoid static damage
• Photograph and label connections; transfer any jumpers and mounting hardware from the original board
• After installation, restore power and run the unit's service/diagnostic procedure or programming steps (see the tech sheet inside the appliance)

Number-8, 18-thread screw used to secure panels, brackets and small assemblies in Whirlpool appliances. Replacing a missing or damaged screw restores secure mounting and helps stop rattling or loose parts. What it does:

• Fastens trim, panels, brackets or small appliance components that use a #8-18 threaded fastener
• Restores secure mounting when a screw is lost, stripped or damaged
• Helps eliminate vibration-related noise from loose parts
• Simple replacement part for basic fastening needs

• Disconnect power to the appliance before servicing and work on a cool, stable surface
• Use the correct screwdriver or driver bit to avoid cam-out or stripped heads
• Thread in straight and tighten until snug; do not over-torque to avoid stripping threads or damaging components
• Replace with the identical screw type and size for proper fit and function

This replacement 7-2-1 screw secures components in compatible Whirlpool appliances, providing a dependable fastener for panels and assemblies. Use it to restore proper fitment and reduce rattling or loose parts. What it does

• Fastens trim, panels, brackets, or internal assemblies to keep parts secure
• Helps stop vibration-related noise from loose components
• Restores correct mounting where the original screw is missing or damaged
• Matches the form and fit of the OEM fastener for intended attachment points

• One replacement 7-2-1 screw

• Use the correct driver to avoid stripping the screw head
• Hand-start threads before tightening to prevent cross-threading
• Tighten until snug—do not over-tighten to avoid damaging plastic or sheet-metal parts
• Disconnect power to the appliance before accessing internal areas

This heavy-duty replacement power cord restores the appliance's connection to household power, delivering reliable electrical continuity for normal operation. Ideal when the original cord is damaged, burned, or fails to supply power. What it does:

• Carries mains electricity from the wall outlet to the appliance so controls and heating elements can operate
• Replaces frayed, cracked, melted, or otherwise damaged cords that may cause intermittent power or no power
• Helps eliminate sparking, overheating, or visible insulation damage at the cord or plug
• Matches the OEM fit and wiring configuration for a direct replacement when compatible

• One power cord

• Disconnect power at the breaker or unplug the appliance before beginning any work
• Verify wiring color and connector orientation match the appliance before attaching
• Secure strain relief and routing to prevent pinching or chafing; tighten terminal connections firmly

This 3-level pressure switch senses washer water level and tells the control when to fill, stop filling, or advance cycles—helping prevent overfilling and ensuring correct cycle operation. It replaces a failed or inconsistent water-level sensor. What it does:

• Detects water pressure changes and signals the washer control to fill, stop, or change cycles.
• Prevents overfilling by reporting accurate water level to the control board.
• Can restore normal fill/drain behavior when a faulty switch causes incorrect water levels or cycle errors.
• Common symptoms: washer overfills, won't fill to correct level, or displays water-level related errors.

• Disconnect power and turn off water supply before starting any repair.
• Label and gently disconnect the air tube and electrical connector from the old switch; avoid stretching or pinching the tube.
• Mount the new switch in the same orientation and reconnect the air tube and wiring securely.
• After installation, run a short test cycle to check for air-tube leaks or kinks.

The Motor-Drive is an OEM part for Whirlpool washing machines. As the primary mechanism powering the agitator or impeller, it is essential for providing the force needed for deep cleaning performance. 

Causes of a bad motor-drive can include normal wear and tear over time, incidents of overloading or unbalanced loads that strain motor function, or damage from moisture or foreign material into the internal components.

Symptoms of a bad motor-drive include:

• The agitator/impeller failing to turn or spinning slowly
• Abnormal vibrations or noises originating from the motor area   
• Inability to progress through cycles or complete cycles on time
• Error codes related to motor operation

This genuine Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This drain hose coupling connects two sections of the washer drain hose to restore a watertight path for wastewater, helping prevent leaks and restore proper draining. What it does:

• Joins two drain hose sections or connects hose to a mating outlet for secure water flow
• Seals the hose connection to reduce leaks at the joint
• Restores proper draining when a damaged or missing coupling causes slow drain or leakage
• Designed to fit the OEM hose profile for a snug, stable connection

• One drain hose coupling as shown

• Turn off power and water supply before starting any repair
• Inspect hose ends for damage; trim to clean cut if required for proper fit
• Push hose ends fully onto the coupling and secure with manufacturer-recommended clamps

This control panel is the exterior console that houses the washer/dryer controls and user interface, restoring a clean, functional front for the appliance. It replaces a damaged or worn panel to improve operation and appearance. What it does:

• Provides the mounting surface and openings for knobs, buttons, and display elements
• Protects internal control components from dust and debris
• Restores correct alignment of user controls and labels for reliable operation
• Helps resolve issues caused by cracked, warped, or cosmetically damaged panels

• One control panel assembly as shown

• Disconnect power (and water if applicable) before starting any repair
• Handle carefully to avoid scratching the finish and damaging clips or mounting tabs
• Some disassembly of the top or front may be required; follow OEM instructions
• If the panel contains attached switches or overlays, verify connectors are secure before reassembly

This replacement power cord provides the main electrical connection for your appliance so it can receive power safely and reliably. Designed as a direct-fit replacement where the original cord is worn or damaged. What it does:

• Delivers mains power to the appliance so controls and heating/cooling components can operate
• Replaces damaged, frayed, or burned cords that can cause intermittent power or no power
• Restores a secure connection at the appliance terminal block and reduces risk of arcing
• Helps eliminate issues caused by loose or broken power leads

• Disconnect power at the breaker or unplug the appliance before starting any work
• Access the terminal block or cord connection point
• Ensure terminal screws are tight and any strain-relief clamp is installed correctly

A replacement pushbutton that restores tactile control to appliance control panels. Designed to replace a broken, stuck, or missing selector button so you can reliably operate affected controls. What it does:

• Replaces a damaged or missing pushbutton on the control panel to restore normal button operation
• Provides a firm, tactile feel for reliable control input
• Helps resolve symptoms like a button that sticks, won't depress, or is physically broken
• Snaps into the console bezel for a secure fit without complex parts

• Turn power to the appliance off at the breaker or unplug before starting any repair
• Access typically requires removing the control panel or console; keep track of screws and clips
• Snap-in design usually requires simple hand tools; do not force parts—inspect clips for alignment
• If electrical problems persist after replacing the button, test the underlying switch or control board

The Knob is an OEM part for Whirlpool dryers. It attaches to the control shaft or stem located behind the dryer control panel. 

Causes of a bad knob can include wear and tear over time, exposure to heat and moisture from drying cycles, accidental damage, improper cleaning techniques, or compatibility issues where the knob no longer fits correctly on the control shaft.  

Symptoms of a bad knob include:

• Knob difficult to turn or jammed in certain positions
• Knob incorrectly labeled so settings are unclear  
• Loose, cracked, or missing knob that does not securely interface with the control panel

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This factory fastener secures appliance panels and components for a tight, rattle-free fit. Replace a missing, stripped, or corroded screw to keep assemblies aligned and performing as intended.

• Fastens panels, brackets, or assemblies in place
• Helps reduce vibration and rattling caused by loose hardware
• Maintains proper alignment of parts to prevent premature wear
• Common signs you need it: missing screw, loose panel, vibration/buzzing noises, or hardware that won't tighten

• Disconnect power; for gas or water-connected appliances, shut off supply lines before service
• Match the screw to the original; verify size, length, and thread before installation
• Start threads by hand to avoid cross-threading; use the correct driver bit
• Snug only—do not overtighten, especially into plastic or thin sheet metal

This silverware basket replaces a cracked, broken, or rusted utensil holder so forks, knives and spoons stay upright and separate for better cleaning and safe unloading. Easy to snap into the dishwasher lower rack. What it does

• Holds silverware and small dishwasher-safe items securely during wash cycles.
• Keeps utensils separated to reduce nesting and improve water circulation and cleaning.
• Replaces baskets with broken tabs, holes, or rust that allow utensils to fall through.
• Helps prevent scratches by keeping metal utensils contained and away from delicate items.

• Disconnect the dishwasher from power before servicing.
• Slides into the lower rack location; no tools usually required.
• Inspect rack tracks and support clips; replace if damaged to ensure proper fit.
• Handle edges carefully if basket is damaged to avoid cuts; dispose of failed basket properly.

Note: 2-Position Switch

The Top Panel is an OEM part for Whirlpool top-loading washing machines. It forms the aesthetic facade at the top of the washer, providing the interface for cycle and option selections. 

Causes of a bad top panel can include cracks or chips developing from repeated opening and closing of the lid over time. Mineral buildup or moisture trapped behind the panel surface may also lead to warping.

Symptoms of a bad top panel include:

• Loose or misaligned assembly that is difficult to open/close  
• Faulty interface buttons from moisture damage
• Leaks forming within the washer cabinet
• Cracks and defects detracting from appearance

Replacing with an OEM top panel restores the original finish while preventing further damage. This Whirlpool replacement part provides a secure sealing surface and structural integrity.

This Whirlpool replacement part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore top-loading washer models.

The Harness Wiring is an OEM part for Whirlpool washing machines. It comprises the bundled electrical wires and connectors that power internal components and circuits within the machine.

Causes of a bad harness and wiring can include cuts, cracks, or fraying of insulating casings over time, corroded connectors from moisture exposure, or wire fatigue from continuous bending during operation.

Causes of a bad harness wiring include: 

• Failure or intermittent operation of components due to broken circuits  
• Arcing, sparking, or burning smells due to exposed or shorted wires
• Restricted access to internal parts due to tangled or bound wires

This Whirlpool replacement part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washing machine models.