Wtw1500 Parts

This electronic control board is the appliance's central control module. It interprets user and sensor inputs to power and time operations, helping resolve issues with unresponsive controls, random resets, or cycles that won't run correctly.

• Coordinates and powers components according to programmed logic
• Manages cycle timing, operating modes, and status indicators
• Monitors inputs and safeguards circuits; supports onboard fault diagnostics
• When failing, symptoms include no power to controls, won't start/run, erratic operation, display/indicator issues, or control-related error codes

• Disconnect power before servicing and verify no voltage is present
• Use anti-static precautions; handle the board by its edges
• Photograph/label connectors and transfer them one at a time to the new board
• Secure the board properly and follow model-specific service instructions before restoring power

This tub ring mounts at the top of the outer tub to contain splashes and suds during agitation and spin, helping prevent over-the-rim leaks. Replace a cracked or broken ring to restore proper water containment and fit.

• Acts as the upper splash shield for the outer tub
• Helps keep wash water and suds from escaping during operation
• Secures with locking tabs for a tight, even fit around the tub opening
• Typical signs of failure: cracks, broken/missing tabs, water or suds at the top of the tub

• Disconnect power and water; wear gloves and eye protection
• Lift or remove the top/console to access the tub opening
• Release retaining clips/tabs, remove the old ring, and clean the tub rim
• Align and snap the new ring evenly into place; confirm all tabs are fully seated before reassembly

This leveling foot threads into the base of your appliance to support and stabilize it. Adjusting the foot helps level the cabinet, reduce wobble and vibration, and keep doors aligned for smooth, reliable operation. Also called a leveling leg. What it does:

• Provides an adjustable contact point to stabilize the unit on the floor
• Helps level the cabinet so doors align and seal properly
• Reduces rocking, rattling, or excessive vibration on uneven surfaces
• Replaces a cracked, stripped, or missing leveling leg

• 1 leveling foot

• Unplug the appliance and turn off water supply if applicable
• Use a helper to carefully move or tilt the unit; support it securely
• Unthread the damaged foot; thread in the new foot by hand, then fine-adjust with a wrench
• Level side-to-side and front-to-back; ensure all feet make firm floor contact

The Control Board is an OEM part for Whirlpool washers. It is the 'brain' of the washer containing all the electrical components and circuitry that allow the appliance to function properly.

Causes of a bad control board can include failure due to extended use over time, exposure to water leaks or surges, or manufacturing defects. Modern circuitry must endure years of wash cycles operating motors, heating elements, and other systems.

Symptoms of a bad control board include:

• The washer failing to start or complete cycles  
• Flickering or non-responsive displays/buttons
• Strange sounds or failure of specific systems (fill, wash, spins)
• Troubleshooting lights or error codes appearing

This quality OEM Whirlpool control board replacement ensures smooth coordination of all washer functions. Dependable performance provides lasting value for your laundry room appliance. This part is also compatible with Maytag, Roper, Amana, Jenn-Air, and select Kenmore models.
 

The Inner Tub Ring Assembly is an OEM part for Whirlpool washers. This assembly serves as a protective barrier between the inner tub and the outer tub, providing support and stability during the washing process.

A bad inner tub ring assembly can be caused by damage, wear and tear, or improper installation. If you notice excessive movement or wobbling of the inner tub, water leakage, or unusual noises during the wash cycle, it may indicate a problem with the inner tub ring assembly.

Symptoms of a bad inner tub ring assembly include:

• Excessive movement or wobbling of the inner tub during operation
• Water leakage from the area where the inner tub and outer tub meet
• Unusual noises during the wash cycle
• Visible cracks or damage on the inner tub ring assembly

Replace your faulty inner tub ring assembly with this genuine OEM part to restore your washer. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

The Washplate is an OEM part for Whirlpool washers. Located inside the washer tub, the washplate works together with the basket to agitate clothes during wash cycles. 

Causes of a bad washplate can include cracks, mineral deposits that clog holes, or excessive wear over time.

Symptoms of a bad washplate include:

• Inefficient or ineffective agitation of clothes
• Long wash times even on light soil levels
• Standing water in the bottom of the tub after spins
• Reduced water pressure during fill cycles

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Drain Pump is an OEM component specifically designed for Whirlpool brand clothes washing machines. It pumps water out of the tub after each wash cycle, preventing excess moisture buildup. 

Causes of a bad drain pump can include blockages in the pump mechanism from foreign objects or mineral deposits, wearing of internal components from regular use over time, or electric component failures.

Symptoms of a bad drain pump include:

• Washer not fully draining water after cycles
• Water pooling or standing inside the washer tub 
• Abnormally long drain times between cycles  
• Loud grinding or knocking noises from the pump

This Whirlpool replacement part is also compatible with Maytag, KitchenAid and select Kenmore models.

The Latch is an OEM part for Whirlpool washing machines. This latch serves the important purpose of securely locking the washer lid in place during a cycle to prevent opening and potential safety hazards.

Causes of a bad latch can include worn or damaged locking mechanisms due to excessive use over time. It may also become faulty if exposed to impact.

Symptoms of a bad latch include:

• The washer lid not fully latching or locking in place
• Unstable or loose lid during operation
• Inability to start a cycle until properly latched
• Safety issues with potential for opening during operation

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Pressure Switch is an OEM part for Whirlpool washing machines. It monitors pressure readings within the water and pump systems during wash cycles. The pressure switch maintains optimal water levels and flow rates by signaling pump operation based on real-time pressure feedback.

Causes of a bad pressure switch can include mineral buildup or corrosion, wear and tear over time, or damage due to impact or moisture damage. 

Symptoms of a bad pressure switch include:

• Incorrect or inconsistent water levels in the tub during fills 
• The pump failing to activate or stay running as needed
• Loud vibrating or knocking noises from inside the washing machine
• Suds or residual water left behind after cycles

This OEM replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Lid is an OEM replacement part for Whirlpool washing machines. It is the top cover of the washer that provides access to the interior drum and tub, allowing you to load and unload laundry. The lid is designed to be durable and secure, ensuring safe and proper operation of the washing machine.

Symptoms of a bad Lid include:

• Difficulty opening or closing the lid
• Lid not closing or latching properly
• Visible cracks or damage to the lid material
• Lid becoming detached or falling off

Causes of a bad lid can range from physical damage due to impact or mishandling, to wear and tear over time from repeated use. Exposure to excessive moisture or humidity can also contribute to the degradation of the lid material or mounting mechanisms.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washing machine models. 

This factory screw fastens appliance components securely. Replacing a missing, stripped, or rusty screw helps stop rattles, keep panels and brackets aligned, and restore a solid, as-designed fit.

• Secures panels, brackets, and trim to the appliance cabinet or frame
• Helps maintain alignment and reduce vibration or rattling noises
• Replaces damaged, corroded, or missing hardware
• Can resolve loose or shifting components

• Disconnect power and shut off gas/water to the appliance before service.
• Use the correct driver; start threads by hand to avoid cross-threading and do not overtighten.
• Install in the original location and match the OEM fastener type specified in your model's parts diagram.

This factory screw secures appliance panels and components, keeping them properly aligned and quiet during operation. Replace a stripped, corroded, or missing fastener to restore a snug fit and dependable performance in the original mounting location. What it does:

• Fastens brackets, panels, trim, or internal hardware to the cabinet/frame as specified by the manufacturer
• Helps maintain proper alignment and reduce rattling or vibration when a screw is worn or missing
• Direct replacement for damaged, stripped, or rusted hardware
• Used in various locations per the service diagram; match to the original position

• 1 screw

• Disconnect power (and shut off water or gas, if applicable) before servicing.
• Compare length and thread style to the original; install in the same location.
• Start threads by hand to avoid cross-threading; tighten until snug—do not overtighten.
• Reinstall any brackets or panels in the correct order.

This electronic control board manages the appliance's console functions and signals, letting user selections run the correct cycles. Replacing a failed control board can resolve unresponsive controls and erratic cycle behavior. What it does

• Receives inputs from the console (buttons/touchpad) and sends control signals to the appliance's systems.
• Regulates cycle timing and mode selection for proper operation.
• Common symptoms it can address: blank or flickering display, unresponsive buttons or touchpad, appliance won't start or stops mid-cycle, or persistent error codes.
• Restores normal control communication when the original board is faulty or intermittent.

• One electronic control board.

• Disconnect power (unplug or switch off breaker) before starting any service.
• Handle the board by its edges; avoid touching components and contacts to prevent damage.
• Use proper anti-static precautions and ensure all wire harness connectors are fully seated and routed as originally installed.

A replacement control panel that restores the appliance's front surface and provides a secure mounting area for buttons and switches. Replaces a damaged or worn panel to help maintain proper control operation and appearance. What it does:

• Provides the exterior mounting surface for control buttons, knobs, and switches
• Protects internal control components from spills, grease and accidental damage
• Restores a flush, secure fit to the appliance front where the panel was cracked, warped, or dented
• Can reduce issues caused by loose or misaligned controls

• One replacement control panel

• Disconnect power to the appliance before beginning any repairs
• Typically secures with screws and may require removing trim or the main console for access
• Handle carefully to avoid scratching the finish; use appropriate tools and fasteners

This screw is a genuine replacement fastener used to secure appliance panels and components for a reliable fit. It restores proper fastening where original screws are missing, stripped, or damaged. What it does:

• Fastens panels, trim, brackets or small components to keep parts aligned and secure
• Replaces missing or damaged screws that can cause loose panels or rattling
• Restores proper clamping force to prevent movement and wear on adjacent parts
• Matches OEM function and fit when the correct part number is used

• Disconnect power and water before servicing the appliance
• Use the correct driver to engage the head cleanly and avoid stripping
• Tighten until snug; avoid over-tightening which can strip threads or crack plastic